Hello
istripper is on my two computers.
Most cards were initially downloaded in 720p,and i did set manually each one to 3k or 4k.
Time consuming.
Is it a safe fast way to copy the models files ,or data also,to my second computer ?
Thanks

@tectro Hi, are you using an external hard drive ?

@tectro. I will let Manue guide you through the process as she is from the team that support iStripper but, yes, it is possible.

I bought a new more powerful PC and installed a second copy of the App on that machine. I then simply took a back up copy of the models from the .vghd folder from my old machine (where all the files were 720 resolution), pasted that onto the new machine into a location of my choice.

Of course all my shows were in 720 on the new machine so I have had to go through a laborious process of re-downloading into 4k where possible. If Manue has a quick way of doing that I would be interested.

@tectro Hi, are you using an external hard drive ?

I use an internal drive on both machines

@tectro. I will let Manue guide you through the process as she is from the team that support iStripper but, yes, it is possible.I bought a new more powerful PC and installed a second copy of the App on that machine. I then simply took a back up copy of the models from the .vghd folder from my old machine (where all the files were 720 resolution), pasted that onto the new machine into a location of my choice.Of course all my shows were in 720 on the new machine so I have had to go through a laborious process of re-downloading into 4k where possible. If Manue has a quick way of doing that I would be interested.

actually vghd/models stand on disk E: res 720

• imagined to copy on a disk F ,then swapping the letters before launching iStripper Should it work ?
• adding a second storage directory ? it would wipe of the 4k files and replace with old 720 according to /application/data ?
• completely remove iStripper and models files,copy the 4k files at the same place and re-install ?
• however I recently tried to do that from a fourth gen Intel board based to a ninth gen one.

The message properly uninstalled appeared on the old computer,but refused to activate on the new one,saying only two machines allowed.
Note my Win 10 s are activated by numeric licenses linked to Microsoft account rather than original activation keys.
Do you identify machines by OS,hardware or both ? I ***** loosing both installations !

The message properly uninstalled appeared on the old computer,but refused to activate on the new one,saying only two machines allowed.

How did you do the uninstallation ?

If you used the standard Windows uninstallation program (or deleted everything manually) then this will not have worked. You have to use the uninstall program provided when you installed iStripper - and you have to be on line so that it can register the uninstallation on Totem's servers.

Yes,
I have done it a few time in the past.

The Process is to Install iStripper Fresh on the New Computer, making sure to use your Same Account info, so it setups all the folders and paths.
then Quit before too much new data is downloaded.

Then you can remove the HDD from the other PC, install it as a 2nd drive in the new PC.
Then copy the files from one drive to the other.

Since the Accounts are the Same, the Encoding of the files would be the same.

You can then remove the 2nd HDD from the new PC and put it back in the Older PC

On the New PC, you would have to use Advance settings to to a Rebuild Collection.
It will take Inventory of all the new files, and update it's rights and database of clips.

The message properly uninstalled appeared on the old computer,but refused to activate on the new one,saying only two machines allowed.How did you do the uninstallation ? If you used the standard Windows uninstallation program (or deleted everything manually) then this will not have worked. You have to use the uninstall program provided when you installed iStripper - and you have to be on line so that it can register the uninstallation on Totem's servers.

Yes I used the proprietary uninstallation program,not Windows-one,but iStripper was not running at the same time,Off course re-install was successfull on the old computer,wich remainded registered.

I will use your method,looks nice,and inform you.Thanks