Age Verification
This website contains age-restricted material including nudity and explicit content. By entering, you confirm being at least 18 years old or the age of majority in the jurisdiction you are accessing the website from.
I am 18+ or older - Enter
I am under 18 - Exit
Our parental controls page explains how you can easily block access to this site.

Discussions for Scenes for Version 1.2.X Fullscreen Mode here

  Форум / Всё о iStripper

Z22
Присоединился в Aug 2017

1166 Сообщения
20 May 2020 (edited)
i have to add 0.1 or some value to xd otherwise it drops out early and never actually reaches xd.
if i have

for (x=(-1.0), x<1.0; x+=1.0)
it doesnt reach 1.0 and drops out at 0.0;
whereas
for (x=(-1.0); x<1.01; x+=1.0)
then it works as intended and x reaches 1.0
Z22
Присоединился в Aug 2017

1166 Сообщения
20 May 2020 (edited)
It behaves like

if (x+1.0 < 1.0 )
{
x =+1.0
}
else
{
break;
}

so..
if (x+1.0 < 1.01 )
{
x =+1.0
}
else
{
break;
}
is needed.
Z22
Присоединился в Aug 2017

1166 Сообщения
20 May 2020 (edited)
maybe it should be
for (x=(-1.0), x<=1.0; x+=1.0)

edit... yep, that works as intended and x reached xd.
SetFuego
Присоединился в Mar 2008

737 Сообщения
20 May 2020
Yes, that is correct. But in your first example, the x-loop cannot work on the first y pass, because
for (float y=(0.0); y<25.01; y+=1.0)
{
float xd = (0.25*y);
float xdm = xd+0.1
for (float x=(-xd); x<xdm; x+=(xd))
{
for (float x=(-0.0); x<0.1; x+=0.0)
The first X-loop with Y=0.0 runs dead because of the step size 0.0.
Z22
Присоединился в Aug 2017

1166 Сообщения
20 May 2020 (edited)
ahh. think i see it now. thanks.

it now looks like

float lum = GetLuma(1.0-FB.rgb);

float yd = 5.0 + (5.0 * lum) ;

for ( float y=(1.0); y<=yd; y+=1.0 )
{
float xd = (0.5*y);
for ( float x=(-xd); x<=xd; x+=xd )
{
float x1 = x*2.0;
vec2 p1 = vTexCoord.xy + Offset * vec2(x1, y);
Z22
Присоединился в Aug 2017

1166 Сообщения
20 May 2020
https://drive.google.com/open?id=1vJzsnCVvwpf_GOn2YtzL_Qs8y-boOHLW
if you're interested this is what i messing about with.
SetFuego
Присоединился в Mar 2008

737 Сообщения
20 May 2020
And here we go! Just start y with >0 and nothing is stuck, that's what I meant.. 😊
EverthangForever
Присоединился в Oct 2009

2467 Сообщения
25 May 2020
On a different bent ..
One thing that would make fullscreen more useful is
..the right arrow to change a clip in the same fullscene

@Team should make it's function to last a bit longer
than the 2 or 3 models or 15 seconds currently.
Z22
Присоединился в Aug 2017

1166 Сообщения
25 May 2020
@Team should make it's function to last a bit longer
than the 2 or 3 models or 15 seconds currently.

?
EverthangForever
Присоединился в Oct 2009

2467 Сообщения
25 May 2020 (edited)
Sure, when models/scenes are played in random..a user cannot keep changing first in code position models indefinitely while playing the same scene by using the right arrow key.
It breaks to a new scene after only a few of such model changes :(
Z22
Присоединился в Aug 2017

1166 Сообщения
26 May 2020 (edited)
Mine stays on the same scene for an hour...

Settings, full screen, minimum delay between scenes = 60 mins.
TheEmu
Присоединился в Jul 2012

3309 Сообщения
26 May 2020
@Z22

The discussion is about the reaction to pressing the right arrow key (and to a lesser extent the down arrow key) while a scene is playing.

If the scene has been radomly chosen then pressing the right arrow key in the first 15 or so seconds of starting the scene will change the princple model. This can be repeated a few times. Pressing the down arrow key changes the scene and model.
Z22
Присоединился в Aug 2017

1166 Сообщения
26 May 2020
Yeh, i know. but i can press the right arrow as many times as i like and it doesn't change scene for at least 1 hour. I thought thats what he was getting at.
TheEmu
Присоединился в Jul 2012

3309 Сообщения
26 May 2020
@z22 - Sorry - from an earlier post of yours, one that just had a question mark in it, I thought that you did not know about this function and hence were ***** it with something else. I see the same behaviour as you - there seems to be no limit on how many times i press the key so long as I do not click elsewhere (which in my case was this forum) while the scene is playing, If i do then the right arrow no longer has any effect - presumably because it is no longer being directed to the fullscreen part of the program.
EverthangForever
Присоединился в Oct 2009

2467 Сообщения
26 May 2020 (edited)
Thanks @Z22 & @TheEmu
I had minimum delay between scenes set at only 5 mins.
changing it to 60 minutes for a while fixed it 👍
Wyldanimal
MODERATOR
Присоединился в Mar 2008

3932 Сообщения
26 May 2020
there seems to be no limit on how many times i press the key so long as I do not click elsewhere (which in my case was this forum) while the scene is playing, If i do then the right arrow no longer has any effect - presumably because it is no longer being directed to the fullscreen part of the program.

Exactly, If you are using dual screens
and you interact with the mouse on the other screen, then you have taken the Focus away from the Full Screen Scene
You can give back the Focus to the scene by moving your mouse back to that screen, and using the right mouse button.
DANO70
Присоединился в Feb 2008

741 Сообщения
3 June 2020 (edited)
Sorry @Carstrip and anyone my scenes have not been shared in these threads for a long time. Don't be suprised with the dead download links.
EverthangForever
Присоединился в Oct 2009

2467 Сообщения
21 June 2020 (edited)
@ALL
Can the people who have downloaded & run the following @Z22 shader based scenes successsfully
please make a comment about what specifications they have on their systems ?

Z22_Hue2
Z22_Hue3
Z22_HueFire_v3
Z22_Hue_Fire
Z22_Hue_Fire_V2
Z22_Hue_Glass

I suspect my mid range system is not powerful enough to compile these, as I have not yet been able
to see properly (above) any of the @Z22 recent scenes with shaders beyond the initial Hue.fsh one.
I really prefer things to work for everyone, before posting up links into the locked Share Scenes List.
Thanks


Intel Core i7-3770K CPU @3.5GHz, HD Graphics 4000
installed MOBO RAM 8.00 GB
NVIDIA GeForce GTX 1050 with 2 GB GDDR5
iStripper v. 1.2.242
DANO70
Присоединился в Feb 2008

741 Сообщения
22 June 2020 (edited)
@E.T.

I don't mess with the real complex shaders scenes much anymore. They are too much for my semi ''potato'' most of the time as you know or ones with shader effects applied to the model herself doesn't work as you guys say (normal model displays). And alot of times the entire shader info fills the VG log. So I just leave them alone now, they're just not worth the trouble for me to tinker with sorry.

Example pics: likely the shader version number thing again with a few other errors the log says. Please don't ask for more info/testing than this. Like I say I don't want to mess with them. The pics are from your 2 last FractualGarden074 scenes recently.
TheEmu
Присоединился в Jul 2012

3309 Сообщения
22 June 2020
@DANO70

Yes, that will be down to not having a version directive, By default GLSL assumes that a shader does not use some "newer" features of the language. Though the features used in this shader have been part of GLSL at least as long as I have been using them in VGHD/iStripper scenes so they are not exactly new. Unfortunately the default behaviour of at least some G:SL compilers is to assume that a very old compiler is wanted even though the actual compiler is much more capable than that.

The version directive says that the shader will use some of these "newer" features and if they are not available then the shader will not compile. From a recent posting by one of the developers it seems that the latest iStripper beta will automatically enable these features.

The version directive is not present in many or most of the originals of the shaders that I obtained from shadertoy.com. In passing, in the past I did experiment with adding a version directive but doing so quite often caused problems in the form of false warnings flooding the vghd log without affecting the behaviour of the shader.
DANO70
Присоединился в Feb 2008

741 Сообщения
22 June 2020
Yeah I read that in the beta threads earlier @Number6 discussed. I just posted it for @E.T. 's benefit.
EverthangForever
Присоединился в Oct 2009

2467 Сообщения
22 June 2020 (edited)
Thanks @theEmu and thanks @Dano for your specs. & comments. I did not realise you were not using a higher type of graphics adapter than what you have. I doubt iStripper beta 1.2.260 as it is, will solve your problem with FractalGarden074 which uses glass4.fsh etc.

@TheEmu
The version directive says that the shader will use some of these "newer" features and if they are not available then the shader will not compile. From a recent posting by one of the developers it seems that the latest iStripper beta will automatically enable these features.
I upgraded to beta 1.2.260 and although I am now able to run @Number6"s shader sample scene ok, it appears to be a specific fix. I am still having no joy with any of the above Z22_Hue* shaders.

looks like we just have to wait and see if the Team will modify their fullscreen compatibility some more.
When I post Z22_Hue* & FG074 archive links up into the Share List thread, I will warn that there might be limited functionality with these. Thanks a lot ;-)
TheEmu
Присоединился в Jul 2012

3309 Сообщения
22 June 2020
@EverthangForever

I have never been able to understand why some of Z22's shaders work. I am not at all sure that they do not rely on some undefined behaviour of the graphics pipeline (i.e. they may be relying on a bug), in particular with how various buffers between stages are initialised or re-allocated. If so this is pity because the feedback from shader output to shader input that these shaders rely on can be used for some very interresting effects (as Z22's shaders show).
DANO70
Присоединился в Feb 2008

741 Сообщения
22 June 2020 (edited)
@E.T.

Just to clarify @Z22 's Hue 1-2-3 scenes DO render/work for me. Just a tad studdery. Which is fairly normal most times in my case.

Your FractalGarden074 is the ones that doesn't display the effect on the girl and the log errors comes in.

It's usualy the otherway around with @Z22 's giving errors and such. But his have been fine mostly. That's what shocked me yours not to work .😀
TheEmu
Присоединился в Jul 2012

3309 Сообщения
22 June 2020
@DANO70

I am pretty sure that @EverthangForever was saying that the scenes all worked with the stable released version of iStripper (the one you and myself are using), that neither FractalGarden074 nor @Z22 's Hue scenes worked with the previous beta version and that FractalGarden074 but not @Z22 's scenes worked with the newest beta.

This is consistant with the betas using a newer version of the Qt toolkit, that that toolkit or the way in which iStripper uses it effectively changed the default behaviour for the version directive allowing FractalGarden074 to be fixed by doing the equivalent of automatically inserting a a version directive but that Z22's scenes are relying on some other, possibly undefined, behaviour, which has changed with the new Qt library. If this is so then there may be nothing that Totem can do to get Z22's shaders to work again - which would be a great loss.

What they may be able to do is to provide a way to indicate in the .scn fle that a shader takes one of its sources the output generated by itself (or some other shader) in the previous frame. This is what Z22's shaders (when I looked at them a long time ago) seemed to be doing "by accident" rather than via some explicit construct used in the .scn file.
Z22
Присоединился в Aug 2017

1166 Сообщения
22 June 2020
Yeh, mine do have a tendancy not to work on other peoples machines :/


The reason why i include
version 120
is because atom, which i use for editing, throws up an error if it's not present. I usually forget to remove it.
DANO70
Присоединился в Feb 2008

741 Сообщения
22 June 2020 (edited)
@TheEmu

From what E.T. said in his posts @Z22 's were not working for him in any version includeing ours.

@Z22

Your's have all worked for me lately. Just a bit sluggish that's all.
Z22
Присоединился в Aug 2017

1166 Сообщения
22 June 2020
@DANO70 If there are any you want in 1080p let me know as they should work better on your machine. I will post the adjusted code in here for you to copy.
DANO70
Присоединился в Feb 2008

741 Сообщения
22 June 2020 (edited)
That's up to you @Z22 The last 3 Hue ones were kind of cool if you want to do that your call.
Z22
Присоединился в Aug 2017

1166 Сообщения
22 June 2020
Hue Fire V3 1080p

clip {
id: Clip
deny: top
//deny: top, table, cage, pole, inout
}


texture
{
id: Feedback
size: 1920, 1080
source: empty/
}

texture
{
id: Flame
source: Textures/
}

texture
{
id: BG
size: 1920, 1080
source: Background/
}
////////////////////////////////////////////////////////////////////////////////

framebuffer
{
id: FeedbackBuffer
size: 1920, 1080
pos: 960, 540

sprite
{
source: Feedback
}
}

// First frame of the FeedbackBuffer is white so need to clear it.
framebuffer
{
id: ClearFB
size: 1920, 1080
pos: 960, 540

sprite
{
source: FeedbackBuffer
shader: ClearFB.fsh
}
}
////////////////////////////////////////////////////

framebuffer
{
id: Girl
size: 1920, 1080
pos: 960, 540

clipSprite
{
pos: 0, 535 //yes... 535 is correct, it stops a problem with the bottom of the screen in hue
source: Clip
scale: -1.0, 1.0
standingHeight: 850
sittingHeight: 652
}
}

// Create a normal of the girl and add it to the FeedbackBuffer&#039;s red and green channels
framebuffer
{
id: Normal
size: 1920, 1080
pos: 960, 540

sprite
{
source: Girl, 0
source: ClearFB, 1
shader: GetNormal_turb.fsh
}
}

// Create a blur of the girls alpha channel with a shift down so it looks like its moving up and add it to the FeedbackBuffer&#039;s blue channel.
framebuffer
{
id: Hue
size: 1920, 1080
pos: 960, 540

sprite
{
source: Girl, 0
source: Normal, 1
shader: Hue_F3.fsh
uniform: speed, float, 0.008 // rate of change (fade)
uniform: resdiv, float, 1.0 //size of sample area
}
}

// Take the values from the FeedbackBuffer and use them as offsets when reading from the "Flame" texture.
framebuffer
{
id: Fire
size: 1920, 1080
pos: 960, 540

sprite
{
source: Hue, 0
source: Flame, 1
shader: Fire3.fsh
}
}


////////////////////////////////////////////////////////////////////////////////

camera {

type: 2D
size: 1920, 1080
pos: 960, 540

sprite
{
pos: 0, 0
source: BG
}

sprite
{
pos: 0, 0
source: Fire
}

sprite
{
pos: 0, 0
source: Girl
}

// Last sprite will be the input to the Feedbackbuffer next frame.

sprite
{
opacity: 0.0 // If only using for feedback you can set to 0.0.
source: Hue
}

}

Вам ещё не разрешается участвовать

Будучи бесплатным пользователем iStripper, вам не разрешается отвечать на форуме или же создавать новую тему.
Но вы можете просмотреть основные категории форума или познакомиться с его участниками !