If you right click the trashbin icon of a single card in your collection (or open the details page and do it there), you will have a drop-down menu with 'delete previews only'.
Preview or demo only cards, ones you do not own, cannot be done this way.

This... any card you own.. you can "delete previews only" on every card... i do this for all shows because I dont need a "preview" that doesnt have any nudity... most cards start the girl off full dressed anyway and they slowly strip.. so i would never have the need to watch a card where i just see them dancing fully clothed and not take anything off... It took me a bit of time to delete all the previews from each card.. but once done.. now any card i get, thats the first thing i do after download... again,.. wish they would make it a setting that would allow you to download the card without previews in the first place so i dont have to take the time getting it then deleting that part... seems like a waste....

I logged on to istripper for the first time in a while and found that my card had shrunk. My profile says I have 1600 cards, but in reality I only have 1593. Probably 6 of them are ***** O Fee's cards. But I don't know about the other one. Can you tell which card was deleted?

I really like Steam, a game platform. Here, even if a game goes down from the store, once purchased, it remains in the library forever.

Even if the ***** O Fee card went down in the store, the person who purchased it once could still have it, but now this is not possible?

Easy. Delete the whole card and just download it again.

Any way to recover an owned models clips that have been deleted by accident (or stupdity) ?

I believe Lucie T is missing from this list.

If you right click the trashbin icon of a single card in your collection (or open the details page and do it there), you will have a drop-down menu with 'delete previews only'.
Preview or demo only cards, ones you do not own, cannot be done this way.

I think I will go to a shoe store and will rate the shoes in there with zero, because they are missing naked girls in them. 😆

I know this was discussed many times before, but it seems to me that some people should rather watch shoe cabinet instead of naked girls. No offense. 😜

Vortim:

Not sure what you mean by "click on the card and delete preview shows."

I assume that you mean go to the card shown in "My Collection." Each model card shown there has 3 icons. Which one do I right click to delete the preview file? I assume that clicking on the "trashcan" would delete the model from "My Collection".

Sorry for the dumb question.

👎

No, Special Event Cards are cards to win during events run on iStripper desktop only.

Hi there,
I got the monthly sub for the mobile and noticed there are no sec shows on it even when I own all off them on the desktop..
Will there be any in the near future for the mobile sub?

You can also click on the card and delete the preview shows for each card to save some space. I wish they gave us the option in settings to just not download the previews at all since they allow us to delete just the preview shows... it would be on my wish list of things i would like to see to make things better....

Beautiefull Girl ...
Have a little Movie....

Another important factor is:
Table clip files are much larger then the same Length ( time wise ) as a standing or Pole clip.
Table clips use more video pixels ( Wide and Tall ) vs ( Tall and Slim ) to make the video.
So a card with Fewer Table clips will use much less Disc space than a card that is Mostly Table clips.

10am in France.

Anyone know what time of day they normally drop new cards?

And it depends if a card is just an iStripper card or an iStripperXXX card, because the XXX version has sound and those clips with sound are bigger.

It also varies considerably from card to card.

Just taking a random sample of 4k cards in my collection, I can see 1.7gB through to 3.4gB.

I select a model from my collection and hit play all clips

This will play all clips on the desktop. For scenes, go into settings, Full Screen, and set Show Duration to all clips (and change any other settings you want).
Then do as suggested above to control what model gets played next. Note that the scene may restrict what clips of that model will play (e.g. a pole scene won't play a table clip).

A ***** correction to @JonC001 's reply - it depends on the resolution ar which you have chosen to download the card (rather than the resolution of the card as it can have 4 of them to choose from). So, to some extent, you have control of the size.

This totally depends on the chosen resolution of the cards:


At 720p this card is 1139
At 4K this card is 2785
That is in megabytes.

How much disk space is consumed when you download a model?

How do I get my selected model to play in my selected scene?

@ezromeo - you asked that question 16 days ago, and I provided you with what I consider to be a detailed description of the various ways you can do it

https://www.istripper.com/forum/thread/52595/1?post=759805

One way is to click and ***** the model's card or cards to the right and drop in the "Now Playing" - "Next" tab for scenes that play only one model at a time. Multi model scenes will play that card and others from your active collection. Some scenes are tailored for certain clip types and will only play those. That's the short of it anyway and there is more to it that others can fill you in on. 😎

I select a model from my collection and hit play all clips; but when I select a scene, a different model appears. How do I get my selected model to play in my selected scene?

Without resorting to labouriously creating playlists (very labouriously unless a third party's software is used) we can currently choose to play all of card's clips

1) In random order
2) In "progressive hotness" order
3) In an approximation to a series of separate stripteases

but there is, unfortunately, nowhere where we can easily choose which of these is to be used for a specfic playing of a card. The best we can do is configure the software such that it is easy to choose between two of them - but even then it is not obvious which order would be chosen. No is it clear that there may be a difference between setting the slider to "All Clips" is different to using the "Play all clips" option of a card's play button as there used to be, I don't know if there still is a difference but when the "Play all clips" option was first introduced then, in my experience, it always played in the order numbered 3 above and then for hte next release it used order 2, went back to order 3 for the following release and then back to order 2 on the release after that (I always had "progressive hotness" enabled).

I hope that at some time Totem make all three options directly available via the play button's menu and also via the settings tab.

If I want the Best experience I Use the clip Numbers and Make my own Playlist
Example the Last two digits are just a clip Number

So I will group all of the 01 clips
then all the 02 clips
then the 03 clips

using the last 3 digits, the 3rd from last is the erotic Level.

and I will order them by Level
so 101's 1st then 201's then 301's, then 401's and then the 501's
then the 102's up to the 502's
103's up to 503's
etc...

not all cards have clips of all the levels..
but I build my playlist using the clips available.

the "Progressive Hotness" option

This will play all of the Level 1 clips 1st, then the Level 2 clips, then the Level 3 clips... Etc

I find that the Play All Clips without using Progressive Hotness results in a more fluid Show.
Use what way results in the best viewing experience for you.

Also in the same section of the settings, it might be a good idea to check the "Progressive Hotness" option, so they will play in a chronological order (more logical when you wnat to play all clips in a row).

Toutes mes excuses et remerciements @ComteDracula - J'avais omis un shader
FG947 est maintenant complet dans le zip

Apologies & thanks @ComteDracula - I had ommitted a shader
FG947 is now complete in the same zip

https://scenes.virtuastripper.net/ET_FractalGarden940-950.zip

Thanks @EverthangForever.

ET- FractalGarden947 does not compile. There is a beige background.


Merci @EverthangForever.

ET- FractalGarden947 ne compile pas. Il y a un fond beige.

Go to settings
Set show duration to All Clips ( full to the right )
Set Delay to Continuously ( full to the left )

Now in your collection view, hover the mouse over a card,
RIGHT CLICK on the play button, Select play all clips

Shows are not like a movie where it is a single continuous Scene.
Shows are made up of individual Clips that May or May not be, linked one to another.

https://www.istripper.com/forum/thread/29408/79?post=760827

FG940-FG950
Eleven selected WebGL shaders remixed & converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform.
Standing or table work randomly applies to all these scenes
unless otherwise captioned.

https://scenes.virtuastripper.net/ET_FractalGarden940-950.zip

zip size = 2.47 Mb
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
Remixed to Coldplay & Sade
https://www.istripper.com/forum/thread/27449/149?post=760828

Is there a way to see a girl's complete show from start to finish without interruption?

Need a bit of freshness ? Then come watch Valeria Mint' vr show! This young beauty hasn't been impressed at all by the VR 180 cameras! We can even say that she has taken a lot of pleasure playing with herself in this cozy room ...

Definitely a must-have !!! Check it out : https://www.istripper.com/vr180/detail/18d6ab49e0ed99db

I second that... or first that or eighth or whatever that, yes please. 👍 😄 😎

😆 👍 😎

@Ullubu

April has 28 cards, starting with Monday April 3rd

You are right! 👍

I work exclusively from home, from my own laptop, so yea, I often have girls around in the background - that's why I enjoy shows where there's less XXX and more stripping/being around, and why Lana Lane and Erin Pink are my recent favourites :)

That doesn't work for me, neither of those girls is in any way ignorable. I guess there are worse problems to have than too many beautiful girls RIGHT HERE on my desktop. iStripper is... addictive.

Ohhhhhh, forgot another thing. It would be swell if the app had a MODEL display in the collection, with one "card" per model!

@sannnn1 - 欢迎来到iStripper。我已经在 Discord 中看到您的消息 - 希望我们能解决您的问题，但我们可能要等到明天技术人员恢复工作。

Some people just want a simple, permanent, dark theme. I used to configure most of my software that way - though, oddly, I have never bothered to do so with iStripper.

I was like that too but now I use more of a canvas background color on a member created skin (I thought it matched the theme better and was easier on my eyes) after testing out some of the dark themes. In addition I change the "Now Playing" text to black and bold from the default teal-ish color on some of these skins. 😎

😉

报道

This would like is a night mode. A switch that would make it possible to vary the brightness of the screen at will as you need the needs or time of use. Without having to install a skin, then change it again the next day 😉 This is how I understand these requests 😉

Yes, and integrating it with the Windows option to automatically invoke a night-time dark mode would be preferable (and is something that I have previously suggested - though personally I woud prefer to manualy switch betwen dark and light modes - something which iStripper currently supports albeit a little awkwardly) but it is not what the regular requests have been for which, as far as I can remember, has always been for a simple "dark theme" (see, for example, the tltle and the initial post of this thread).

Some people just want a simple, permanent, dark theme. I used to configure most of my software that way - though, oddly, I have never bothered to do so with iStripper.

There are many dark themes available for iStripper - see for example the following two forum threads (there are probably more forum threads and, I am sure, that there are also more on Discord but I don't go there) https://www.istripper.com/forum/thread/37219/1?post=546422 https://www.istripper.com/forum/thread/33544/1?post=505634However, as it is something that users have repeatedly requested, in my opinion it is something that Totem really should provide as a standard option.

Thanks for the help 😀

However, as it is something that users have repeatedly requested, in my opinion it is something that Totem really should provide as a standard option.

Ce que beaucoup souhaiteraient est un mode nuit. Un interrupteur qui permettrait de faire varier la luminosité de l'écran a volonté suivant les besoins ou l'heure d'utilisation. Sans pour autant devoir installer un skin, puis le changer à nouveau le jour suivant 😉 Voila comment je comprend ces demandes 😉

This would like is a night mode. A switch that would make it possible to vary the brightness of the screen at will as you need the needs or time of use. Without having to install a skin, then change it again the next day 😉 This is how I understand these requests 😉

Hi, yes it's possible, I made a tutorial on discord 😊https://discord.com/channels/709339443777110026/887805197559169064/887805200482566174

Thanks a lot!! it worked 😀👍

There are many dark themes available for iStripper - see for example the following two forum threads (there are probably more forum threads and, I am sure, that there are also more on Discord but I don't go there)

https://www.istripper.com/forum/thread/37219/1?post=546422

https://www.istripper.com/forum/thread/33544/1?post=505634

However, as it is something that users have repeatedly requested, in my opinion it is something that Totem really should provide as a standard option.