@Calgon

I have to dissagree with you.

1. Add a Wallet extension to your browser
2. Connect your iStripper account to the walletBINGO - Free NFT comes to you when Totem next send them out

You forget to create the walled. That took more time as you need to read everything so that you understand what and how to do. (and add the Dols token)

4. Buy some "MATIC" currency on the Polygon network

The first time was a ***** in the XXX. (ID and photo) Now after the first time it is easier but the first time can be a reason to not go futher for Some.

5. Once you have some MATIC you can swap some for DOLZ to use in the auctions. I swap mine straight from my wallet, really easy.

When I try to do that with MetaMask I got a warning about Dolz. So asking on discord they advice me to do it from the Dolz webside. Which the first time did not go as plan. Again after help from others on discord now it it works and it works everytime.

6. Go to the auctions site and connect your wallet there. Apart from adding your email address that's it - your wallet is your account and you can now use your Dolz to bid in the auctions - again, really easy

The first time you want to place a bid MetaMask ask what the max Dolz you want to use. Then you have to aprove the bid in MetaMask before it will show your bid. The first time for me was ***** because i did not know how to do it and it can takes some time (from a couple of second to a minut) before the bid show up.

Sure now i have read a lot and done it a couple off times I understand it and it is easy. So iff anyone wants to do this read and ask around that will help.

I really really do not understand the negativity towards the NFTs

Because most NFTs are useless that people buy so they can sell it for a higher price. (Like painting rich people buy not to hang on the wall so they can look at it)

The Totem NFTs are shows that you can enjoy just like the normale cards. Totem also try to make the limited card low price is a plus. For me that was 2 off the 3 reason to start this but it is not for everyone.

@WyldAnimal

follow these 5 simple videos, it's Easy

She did a great job but the last video was not online when i started. Also the part where to buy Matic she did not mention that you have to sent a copie of your ID plus a photo.

I watch the 4 video's and a tutorial from a link in discord. Not everything look or works the same for me as in the video's

but you do have to Learn how it works...

And that's the most importend thing read and learn before doing anything.

O and if someone has the Sonja Blaze Epic card for 150 to 200 Matic that would be nice. 😊

This is not a big deal and it's Mac specific:

THANK YOU, THANK YOU, THANK YOU!!!

1. The version number now apears in the Get Info box of the Mac's Finder.
2. The minimize button on the app's window now works.

Two small things that have been irritating me for years are not corrected.

@willyweekly

As @WyldAnimal said in his post when browsing cards in the way you describe clicking on the "Collection" tab does the same thing as clicking on the X used to do. You could think of it as the X being moved rather removed (though as it was always there anyway no movement was involved)

Technically I think what may well have happened is that the X, which was on more than the "collection" pages) and which took you back to the previously opened "top level" page has been replaced by a more general "go back" function. Retaining both the new back button and the old X would require keeping track of two potential places to go back to depending on which of the buttons was pressed. Not particularly difficult, but I can see why it may not have been considered necessary.

Will the x return to the top of the cards?the X has been removed in Versions 1.2.5xx.

This suggestion is helpful. I was looking at cards I don't own and browsing. It is a new blip that I will adjust.

@dar2112v

And if you want to buy/sell in aftermarket then I *assume* you need an OpenSea account and it must be connected to something one or the other if not both. If I got any of this wrong please let me know as I would not knowingly state things that are not true.

It really IS quite simple. It's worth doing just to gain an understanding of where the internet is headed. People refusing to look at new technology seems like refusing to buy a CD player or still having a fax machine.

1. Add a Wallet extension to your browser
2. Connect your iStripper account to the wallet

BINGO - Free NFT comes to you when Totem next send them out

3. Make sure your wallet is on the Polygon network (easy but v. important)
4. Buy some "MATIC" currency on the Polygon network

MATIC is the "gas" currency for our transactions and it is really cheap compared to other networks 👍Every time you do something on the network you're going to need a few cents of MATIC to oil the transaction.

Your wallet address IS your account on lots of Web3 things.

5. Once you have some MATIC you can swap some for DOLZ to use in the auctions. I swap mine straight from my wallet, really easy.

Auctions
=======
Your wallet IS your account

6. Go to the auctions site and connect your wallet there. Apart from adding your email address that's it - your wallet is your account and you can now use your Dolz to bid in the auctions - again, really easy

Aftermarket - Opensea
==================
Your wallet address IS your account again

7. Just connect your wallet to Opensea and you can buy/sell/transfer or even ***** your NFTs all from there. (really easy)

I really really do not understand the negativity towards the NFTs, I think it is a fantastic product. I certainly don't think it is "ruining iStripper" as you say.

Appreciate the picks. If others know more please chime in!

If you're going to make a Post ***** about the topic
then, At Least you should have some 1st hand Knowledge

I like to think I could figure it out if I wanted to participate but I don't want to support the product I feel is ruining IS and I don't want a crypto wallet so hard pass for me. That said I do not want to pass along incorrect information; I did clearly state that I had no experience (or no clue) but I am curious what I got wrong?

In your own words:

You get a *FREE NFT card for just creating your Wallet ( FREE to DO )
and Linking the Wallet to your iStripper Account ( also FREE to DO )

You do need a wallet and a istripper account and you need to connect them? And if you want to buy/sell in aftermarket then I *assume* you need an OpenSea account and it must be connected to something one or the other if not both. If I got any of this wrong please let me know as I would not knowingly state things that are not true.

As far as how 'complicated' it is .. I would imagine that once you've gone through the motions and learned the different sudo currencies the process will be fairly easy to repeat but I don't see any scenario where it's not complicated. Things that aren't complicated rarely need tutorials and videos.

You get a *FREE NFT card for just creating your Wallet ( FREE to DO )
and Linking the Wallet to your iStripper Account ( also FREE to DO )

Do just that and you get a *FREE NFT card and it costs you Nothing....

Requirements:
Must have an iStripper account
Must be Bronze Level with at least One Purchased card using Purchased Credits
using Free Credits doesn't count, having a Free cards doesn't count

It's all really quit simple..
Once you get over the Learning Curve
you will see that it's Not Complicated...
But you do need to Learn some new terminology and some processes
and I think that; The Learning Curve is being ***** with Complicated..

It's not Complicated, but you do have to Learn how it works...

follow these 5 simple videos, it's Easy...
https://www.istripper.com/forum/thread/53400/1?post=768340

@dar2112v

At a minimum you need a cypto wallet, Istripper account, and OpenSea accounts. Then you have to manage the transactions that go something like: real money to Eth to polygon to dolz (and Matic? somewhere?)

Then you have to link all these accounts together - no clue how that works but I assume: wallet to Dolz, Dolz to Opensea? Istripper to Dolz?

I take it you haven't participated either because most of what you wrote is not accurate...
See; that is the Problem..
Members who have not Participated, have no real knowledge of how it works,
making posts with too much misinformation in them.

If you're going to make a Post ***** about the topic
then, At Least you should have some 1st hand Knowledge

Please STOP spreading Misinformation

Aria Star - Who Needs Dusting ? - e1893 - iStripper
Samantha Cruuz - Morpho Menelaus - f1333 - iStripper XXX
Bella Angel - La Douceur D'un Ange - e1896 - iStripper
Lisa Belys - Hot Black Stripes - f1351 - iStripper XXX
Azelia - Simply Delicious - e1909 - iStripper
Kama Oxi - These Boots Are Not For Walking - f1343 - iStripper XXX
Sandra Lyd - Fresh From the Beach - e1907 - iStripper

@Calgon Brilliant! I would personally volunteer to become the table surface myself. Just put me in a custom green screen box or throw a cloth over me with a hole cut out of it. The girls can bounce as hard as they want and I will gladly absorb all of the ***** and punishment those hardwood floors can dish out. Ahh if only to make such a sacrifice..Joking aside that is interesting and I wouldn't have thought of that and didn't notice that over those years. Thanks @Orclover now I can't even ***** about that anymore :) I didn't say it before @abworkout but I hoped that my picks helped you out either way.

From the post by @Voluntas, this is the paragraph that I would like to discuss.

Don't get me wrong here though. I have nothing against exclusive content and paying a good sum for exquisite stuff, but it should be accessible for the entire active market not just a handful cryptocurrency warlords who probably have practised crypto-manipulations at nano-dimensions for years and can now monopolize on all the NFT benefits

Until the start of Season 1, I personally had never been near any crypto-currency. But I wanted to be able to buy some of the NFTs so I set up a Metamask wallet and used Transak to convert $50 (from my bank account, the transfer of which I initiated) into Matics and then worked within my Metamask wallet to convert those Matics into Dolz.

Since then I have bought (in the auctions) a limited edition version of each card offered. I have just used Transak again to add a further$20 into my Metamask wallet.

So it is not really that different to using a credit card via one of our payment service providers (Epoch) to convert $50 money into 500 credits which we have been using to buy cards for years.

I am a collector, not an investor. And I think I am representative of a lot of members who are doing the same as me. I doubt I will ever re-sell them - but at least that option is available to me. 😊

Thanks, guys. I just decided to download 530 and install over my latest upgrade. It fixed the problem. But thanks for the d/l link, Wyldanimal. I 'll d/l it and keep it handy in case this ever happens again.

I get not liking the tone of the comments but I'm not sure how you you call it mis-information?

" how the secodary market has already spiralled out of control"

I have no idea what it means for the secondary market to spiral out of control means but that sounds like an opinion. If it has basis or not I haven't a clue. I'm very curious how the secondary market is doing but haven't been able to find any details.

"these nasty little games are only designed for crypto exchange pump-and-dump manipulations."

I mean .. pumping and dumping is pretty much how I see this as well. Create a fake currency .. get investors to buy in with promises of future profits selling a limited availability product to an established customer base and try and convince those buyers that not only do you get this hard to buy product they can sell it for "3 times the profit" later.

I'm not saying it's illegal or even immoral and if you don't mind the process and want the show at the price available then good for those members who get them. But I'm confident some investors are gonna be left holding the bag. I'm talking to 2 different artist about the possibility of developing a NFT collection. Both are leery as their are not technical; in my discussions I've never called it a pump and dump ... instead I tell them "it's money for nothing and your chicks for free"

"Plus, this whole dolz system is just too damn complicated"

DOLZ & crypto ain't simple by any definition.

"I have neither the time nor the energy to manage hundreds of stupid online accounts."

I don't know how much time or energy the OP has but you do need at least a few of accounts to fully participate:

At a minimum you need a cypto wallet, Istripper account, and OpenSea accounts. Then you have to manage the transactions that go something like: real money to Eth to polygon to dolz (and Matic? somewhere?)

Then you have to link all these accounts together - no clue how that works but I assume: wallet to Dolz, Dolz to Opensea? Istripper to Dolz?

You may not agree with the OP arguments (or mine) but mis-information is saying that the DOLZ system isn't complicated. And while its fine to say members have tripled their money in the after market saying or even implying that future buyers will do the same is not OK.

Thanks !!!.Great info, much appreciated!

@Voluntas

Most everything you posted is 100% misinformation

You have obviously not done any research in to the DOLZ metaverse

PLESE stop spreading Misinformation

Misinformation:

" how the secodary market has already spiralled out of control"

Misinformation:

"these nasty little games are only designed for crypto exchange pump-and-dump manipulations."

Misinformation:

"Plus, this whole dolz system is just too damn complicated"

Misinformation:

"I have neither the time nor the energy to manage hundreds of stupid online accounts."

@boan000

I have a copy of the default skins
you can download from here
copy it to your data folder
Unzip it from in your data folder

https://virtuastripper.net/files/skin/iStripper-skins.zip

it contains the following skins
basic
Halloween 2016
Harley XX
melena
Sybil

@orclover

I suggested they use a prop like book or mirror to stick the toy to

I personally volunteer to hold the toy steady for them.

@boan000 - I'm afraid the bad news is the problem looks to be at your end.

I saw your post, I am running 1.2.530 in 64 bit and I have successfully swapped to the Harley skin.

You are having a rough time of this 😰I wish I had the technical expertise to help you.

Haha good luck to you. This has been tried and failed for years. Many missed opportunities and girl after girl fail at this mostly because the toy can't stick to whatever surface they are using. I personally don't like toy clips but I make exceptions for a nicely done bouncing toy ride especially depending on the woman doing it. These numbers are the only ones in the last several years that are good or at least the best attempts..(remember to put the letter f in front of them when searching I didn't include names..843, 871, 874, 952, 974, 1141, 1186/87. 1317, and pretty much any Marina Gold show (I included a name after all.)

Totem used to use a harder floor surface but girls were getting ***** and were uncomfortable in table clips and it affected the show quality because they wouldn't move around on their knees. 2015-2016 has shows where the toy does stick normally but you will also noticed girls like Nekane have ***** all over their legs from the table. And other girls from that time just refused to move on the floor. So I believe they began using a different surface and the table shows have gotten much better in terms of girl movement but the toys do not work as well. I suggested they use a prop like book or mirror to stick the toy to and that suggestions was passed on to team.

Tbh, this whole NFT thing reminds me too much of the Magic The Gathering and similar TCG madness, which is why I utterly abhor it and will avoid it like the plague. Just taking a look at the various card offers on OpenSea will make you realize how the secodary market has already spiralled out of control, as is typical for these kinds of collectibles. Like other posters have already pointed out correctly, these nasty little games are only designed for crypto exchange pump-and-dump manipulations. Plus, this whole dolz system is just too damn complicated and I have neither the time nor the energy to manage hundreds of stupid online accounts.

Don't get me wrong here though. I have nothing against exclusive content and paying a good sum for exquisite stuff, but it should be accessible for the entire active market not just a handful cryptocurrency warlords who probably have practised crypto-manipulations at nano-dimensions for years and can now monopolize on all the NFT benefits.

Make the trading cards purchasable for all customers in the right mood and with real money! Common rarity cards at least should be on offer in the regular store as well, if totem is indeed willing to give every user the chance to obtain some of them. Also, I need to see a preview or a couple shots first before I buy a pig in a poke.

Updated to 1.2.530/64 bits /Qt5.15.13 , still randomly and silently crashing,,,😟

To remove all demo files at once, you can use this tool:

https://www.isworkshop.eu/index.php?p=remover

Manual:
https://www.isworkshop.eu/index.php?p=remover_what

So, are none of the skins available for 1.2.530? Or is the ***** of available skins maybe related to the failed rebuild that ***** a reformat of my drive that had the data folder on it? I used to like to use the Harley XX skin. Is there a link to download the stock skins, or are they temporarily disabled? There does seem to be some subdirectories missing in the data folder; I only have a cache folder, musics, scenes and an update folder. I thought synching with the server redownloaded missing program components, but I guess it doesn't. And I think a few of the scenes may be missing. I haave 16 available full screen options, but I thought there are 20... I might just d/l the full 64-bit install exe for 530 and run it over my current installation. Hopefully that will sort out a few of these types of issues.

If you really want to delete a card.........

On the details page, next to the "eye" icon is the trash icon.
Then click yes to delete the card. The card remains in your collection & unless the card has been removed from the store, you can download it again. If the card has been removed from the store, please make a backup copy of the card's files as you may not be able to redownload the card again.

Hope that helps.......

How to delete the girl who I do not like?

Click on the card to see it's details.
On the card is an EYE icon.
Click on that EYE Icon to put the card in the Hidden Collection.

Now Click back on the My collection Tab.
This card is no Longer Seen in your Collection.

Haha good luck to you. This has been tried and failed for years. Many missed opportunities and girl after girl fail at this mostly because the toy can't stick to whatever surface they are using. I personally don't like toy clips but I make exceptions for a nicely done bouncing toy ride especially depending on the woman doing it. These numbers are the only ones in the last several years that are good or at least the best attempts..
(remember to put the letter f in front of them when searching I didn't include names..
843, 871, 874, 952, 974, 1141, 1186/87. 1317, and pretty much any Marina Gold show (I included a name after all.)

How to delete the girl who I do not like?

@CasinoGuy wrote:

`i will use other sources for the latest cards....

Can you explain what you mean by "Other Sources" ?

@CasinoGuy - sorry about that but as the records seem to show you have not bought a card for at least the last 5 years......

😉

I don't spend this credits anymore for new cards `i will use other sources for the latest cards.... in my eyes too expensive and I hope it won't destroy your business when more people walk away....

Enjoy your weekend!

Its not realy a offer but a way too make extra money ....

@WA

it has "Selecter Strippers version 1.2.530", with the really telling icon on the list of programs

I think @Jollywoodman was referring to the way iS is shown in the list of installed apps via the control panel.

It is a 2 Step Process

1) create the Shortcut
Change the Name
Add the -fromSilent to the command
Change the Icon
Pin the New shortcut to the TaskBar, Startmenu, or copy it to where you want it.

2) start iStripper, ( it now starts silently to the system Tray. )
Go to Settings
put check in advance settings
scroll down to Safe for Work
Pick one of the Two SFW options.

Now you have a discreet version of iStripper.
Even if someone accidentally
clicks the Shortcut and the App Starts up.
It starts up Silently with a discreet icon in the system tray.

Options:
in the settings

• Have it Always Start Disabled
• Enable the Password.

change the Shortcut
https://wyldanimal.com/videos/iStripper-2-Safe-001.mp4

Use the Password
https://wyldanimal.com/videos/Use-Password-001.mp4

in the Settings of the app is a section Safe For Work.
There you can select Two different discreet options.

They Both change the name and the Icon shown in the Systray

Also, find the shortcut and add the command line option
add -fromSilent

Then change the Icon and the Name of the Shortcut.
Here is a demo...

I found this information.... looks complicated.:

Changing the name of a program listed in the "Installed Apps" list on Windows can be a bit tricky and might require some advanced technical skills. It typically involves modifying system registry entries. However, I must emphasize that modifying the Windows registry can be risky and might lead to system instability or other issues if not done correctly. Therefore, proceed with caution and make sure to create a backup of your registry before making any changes.

Here's a general overview of the steps you would need to follow:

**Warning: Modifying the Windows Registry can have serious consequences if done improperly. It's recommended to proceed only if you are comfortable with advanced Windows system administration.**

1. **Create a Registry Backup:**
Before making any changes, it's crucial to create a backup of your Windows registry. This will allow you to restore your registry in case anything goes wrong. To create a backup, follow these steps:

• Press Win + R to open the Run dialog.
• Type "regedit" and press Enter to open the Registry Editor.
• In the Registry Editor, go to "File" > "Export."
• Choose a location to save the backup file, give it a name, and select "All" under the "Export range" section. Click "Save."

2. **Identify the Program's Registry Entries:**
You need to identify the registry entries associated with the program whose name you want to change. These entries are usually found under `HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall` or `HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Uninstall` for 32-bit applications on 64-bit systems.

3. **Modify the Registry Entry:**
Locate the registry entry corresponding to the program you want to rename. Right-click on the entry and select "Rename." Change the "DisplayName" value to the desired discreet name. Additionally, you might need to modify the "DisplayIcon" and "Publisher" values if you want to hide the program further. Remember that this is a delicate process, and making incorrect changes can cause problems.

4. **Refresh or Restart:**
After making changes, you can refresh the "Installed Apps" list by restarting your computer or by ending the "explorer.exe" process in the Task Manager and then restarting it.

Again, I want to stress the importance of caution when editing the Windows Registry. Making incorrect changes can cause system instability and even make your operating system unusable. If you're not comfortable with these steps, consider seeking assistance from someone with more technical experience.

Furthermore, please note that while this approach can change the displayed name of the program in the "Installed Apps" list, it might not hide the program completely from all system views and actions.

@Jollywoodman
In the settings of the app, you can change the icon displayed in the systray. Have you tried with this option ?

Hey. I have people who at least know a bit about computers around me, and I wanted to remain disceret. When I open the control pannel, it has "Selecter Strippers version 1.2.530", with the really telling icon on the list of programs. I did rename and change the icon, but it doesn't change how it shows up in the control panneol, and on things like the windows ten search bar history. Is there any remedy for this?

For the More Advanced User
If you have Many Previews and want to Automate the Process
you can use a Script to do this
Here is an Example:

copy it and save it to the Root of your Models folder.
Run it from there.

This is in DEMO mode, so as it is written it doesn't delete any files
it just makes a log of What it Would delete when you take it out of DEMO mode.
I leave that part up to you.
Like I said, this is for Advanced Users.

rem find all the Preview Clips and delete them if not part of a full card
@echo off
setlocal enabledelayedexpansion
rem create log if it does not exist
If Not exist RemovePreviewClips.log @echo off > RemovePreviewClips.log
rem Log the start time
Echo Started at %date% - %Time% >> RemovePreviewClips.log
rem search all of the possible card folders
For /D %%d in (a0???, a1????, c0???, d0???, e0???, e1???, e2??? f0???, f1???, f2???) do (
Echo checking in folder %%d
rem if the folder does not have any .vghd files, it is a preview card
@if not Exist %%d\%%d*.vghd (
Echo removing the previews from folder %%d
rem make a log of the clips
echo removing the preview clips from folder %%d >> RemovePreviewClips.log
dir %%d\*.demo >> RemovePreviewClips.log
rem delete the clips
rem
rem in demo mode by default
rem ***************************
rem delete the rem from the line below to allow file deletion
rem del %%d\*.demo
rem ****************************
rem
)
rem loop through all the folders
)
rem done record the time to the log
Echo Finished at %date% - %Time% >> RemovePreviewClips.log
echo Done.
Pause
rem exit

is there a permanent file being downloaded

Yes, the Preview Files are Stored Locally on your PC

If so,where is it being stored

Go to the top right by your user name, and click on the down arrow.
then select Settings
Put a check in the box Advance Settings
Now Scroll Down to the DATA section
Look at the Storage Folder PATH
that is where all of the Models files are stored.

C:\Users\USERNAME\AppData\Local\vghd\models\

use a windows Explorer folder and navigate to that Path.
( this is normally in a Hidden User Folder)
( you might have to google: How to show Hidden Folders )
Each Card has it's own sub-Folder
Both Purchased cards, and Preview cards are ALL in this same folder
make sure you are finding the Preview card number, and not one of your Purchased card numbers.
find the folder name for the Preview of the card and you can delete it.

Each Card has a card number
Each type of card has a Prefix Letter

in General:
iStripper cards start with the Letter 'e'
iStripperXXX cards start with the Letter 'f'

Classic iStripper cards start with the letter 'a'
Classic iStripperXXX cards start with the letter 'c'

VirtuaGirl Classic cards start with the letter 'd'

hope this helps

Will the x return to the top of the cards?

the X has been removed in Versions 1.2.5xx

You can use the Bak arrow to Step Backwards one place in the History.
or you can click the Tab at the top
to go directly back to the My Collection View or Back to the Store View
( using the Tab at the top is the same as using the X was )

Here is a Hint to Navigate from Card to Card Quick and Easy.

open the Playlist Tab
***** multiple cards from the Store to the Playlist

Now you have a LIST of Card Images you can Click on
to quickly get from one card to the Next.

Clear the playlist when done,

Repeat with the Next group of cards.

530 pc here
I clicked on a card, I don't have an X in the top corner to exit the card.
I use the arrow to go back.
Will the x return to the top of the cards?

Does Christal have any more shows scheduled for this year?

@gladiux

Not at this time.......

When I am Downloading Previews, is there a permanent file being downloaded which is taking up disk space on my PC?

If so,where is it being stored; and how can I delete it ?

I'm a fan of the clips where the girl sits on the dildo and rides it. Generally I buy cards if I notice that position in the pictures, but sometimes they don't end up doing it in the clips themselves.

Since the last time someone asked about this was years ago, there should be a TON of new cards that have dildo riding in the XXX clip. What are some recommendations? Thanks.

I create a Playlist from my Collection and use that as the input for the Bonus Downloader.

I open iStripper
select the cards I need to Update and ***** them to the Playlist Tab
save this list as update.vpl

Then in the Bonus Downloader app
I use Menu Selection 4
and Load the update.vpl file.

then Start the Updater
and it downloads the Photosets and Video clips for the cards that I put on the update Playlist.

Does Christal have any more shows scheduled for this year?

530 working fine on both desktop and laptop. Installed correctly on both.

530 is working very well. No problem installing on desktop. I'll check the laptop soon. All functions that I use are working.