Call for caresses ! Dee Vine is here in VR and she's a very very naughty kitty!

https://www.istripper.com/vr180/detail/375c01acae82a3c4

Enjoy!

1) I am wrong too often!
2) I need to log in more often.
3) Dang, I missed the event.

Sorry for the bad note.

Member @kris2222 asked about Sharpening the Clips.
I said that a Full Screen Scene would be Ideal for this...

That Member then asked How ?

So I created a Sharpen Shader and posted the Details in that Thread.
Figured I'd Share it here as Well.
https://www.istripper.com/forum/thread/56134/1?post=791518


Here is a Link to the 4 Files in a Single ZIP file.
antiAlias.fsh
Background-2D-Sharp-SBS.scn
Background-2D-Sharp.scn
Sharpen.fsh
Unzip to the Existing Background 2D scene folder.

( Note: this is not a complete Scene, it is just Add on Files for the Existing Background 2D scene )
https://virtuastripper.net/Background_2D_Sharpen.zip

This is Another VR180 show that shares the same Name as a Previous VR180 show.
G0067 was previously used for Selva Lapiedra,
So when you Download this New G0067 show, it will ask you to Overwrite the Existing Show..

You have Two Options
1) rename the Old Show
2) rename this show

The Earlier Selva Lapiedra Show has been Renamed to F1549
So you can Also go and redownload that show and it will have the new Name.
Selva Lapiedra
https://www.istripper.com/vr180/detail/da89ced90aa3a0da

PS, this will Happen with All of the Shows, where there was an Earlier 'G' series Vr180 show, that got renamed to an 'F' series show.
When you go to Download the New Show, it askes if you want to overwrite the existing one.
That's how you know, there was an older show that already used the same name.

How do you see clip lists in Version 2?

"Right Click is your Friend"

When you need the clip list of a card, a core function of this program, after such a friendly right click you have to click again (2 clicks instead of just one in old versions, by the way - but this is not the main issue),
just to see the opening of - unfortunately - only a small popup list, which doesn't even allow you to see all clips in a time (this makes scroll necessary - but you almost never had to scroll clip list in old versions-, so use of the clip list becomes slow and cumbersome in 2.0);
and, moreover, such popup does slow the playing of animations while it stays open (i.e. practically always - at least in my use of the iS software).

This is the main and the biggest of the many reasons for me version 2.0 is unfortunately a big no.

At least, please get the possibility to expand the clip list to full window view - and make it not slow the program at all, as it was in old versions. Thanks...

Solved. Thread closed.

😍😍😍 More 😉

You do spoil us rotten Ma'am, Lilly is so delicious she must be bad for me😂😋
Thankyou @celine and Team💖👍

welcome

Thanks

@echnaton192

it is NOT a ***** for you as the User, to access the same installation from Multiple User accounts on the same PC.

It IS a ***** for Multiple Persons to Access the same Installation on the Same PC.

This is the reason that when it is installed, it is Installed to a Single User Profile.
It is NOT meant to be shared to Multiple Users of the Same PC.

In your Situation, you can Ask for an extra Install to be allowed on your Account,
or you can use a creative work around as you have described.

…

To request an additional Install.
Make a Post in this thread and present your details of Why you need more than 2.
Too Many Installs: https://www.istripper.com/forum/thread/28643

Thanks. That is actually helpful :-)

I understand the reasoning behind the installation path.

And I am completely aware that sharing the installation with others is a *****. But my PC is not to be shared with anyone.

Thanks again.

Two Installs on the Same PC can then Share the Same Models files.
After the 1st install, In Advance Settings
Change the Data Path to that of a location that Both Installs can access.

Est-ce que je peux installer la dernière version (bêta) en conservant la 1.2.552 (bluilt 1005) ?

Cela me permettrai de switcher vers la stable si la bêta ne fonctionne pas correctement.

It has been many years, probably more than a decade, since the data folder was in my user profile.
A long time ago, I learned to change the location of the app. So the data and models folders are always in a location of my choice, while the bin folder is in the vghd folder within the user profile.

I always keep the data and models folders within a folder I call 'SexyGirls', on both the internal drive, and the external drives.

Two Installs on the Same PC can then Share the Same Models files.
After the 1st install, In Advance Settings
Change the Data Path to that of a location that Both Installs can access.

Then switch User Accounts on the PC
Install the 2nd Installation, and again
go to the advance settings
and change the Data Path to the same shared location.

Same iStripper Account with:
Two Installs on the same PC using two different User accounts, but by the Same Person:
Each install is in to that Users Profile.
The VGHD, the BIN, and the DATA folders are stored in the User Profile.

But The Models Folders are In a common Shared Location.

@echnaton192

it is NOT a ***** for you as the User, to access the same installation from Multiple User accounts on the same PC.

It IS a ***** for Multiple Persons to Access the same Installation on the Same PC.

This is the reason that when it is installed, it is Installed to a Single User Profile.
It is NOT meant to be shared to Multiple Users of the Same PC.

In your Situation, you can Ask for an extra Install to be allowed on your Account,
or you can use a creative work around as you have described.

But if it is detected that your iStripper account is being shared to Others,
then your Account will be Banned.

Look at it from this Perspective.

If like you ask, the app can be installed for All Users.

Then on a PC where there are 2 or More REAL persons using the same PC
That single iStripper install is Being Shared by more than 1 Real Person.

That is a ***** of the TOS.

To Prevent that, Each install is ONLY installed to the User Profile of the Current User on the PC.
One User per Install.
and Each iStripper Account can Install it Two time.


that can be Twice on the Same PC, or it Can be Once on two different PCs

To request an additional Install.
Make a Post in this thread and present your details of Why you need more than 2.
Too Many Installs:
https://www.istripper.com/forum/thread/28643

How do you see clip lists in Version 2?

go read the 1st post.
https://www.istripper.com/forum/thread/55927/1?post=789254

"Right Click is your Friend"

Lovely lovely lovely, here is Lilly Mays again !!! The more I watch this show the more I love her (if it's still possible!)

Enjoy! https://www.istripper.com/vr180/detail/62feaf225cd58c51

I have iStripper installed on two Macs. On one of them I use it from two accounts. Never had a problem.

How do you see clip lists in Version 2?

This post tells how to use playlists, including importing old ones.
https://www.istripper.com/forum/thread/55260/1?post=783598

I tried version 2 and I like it a lot.

Unfortunately, the one thing I didn't like is the fact that I couldn't seem to import my existing playlists.

I'm back using the stable version. Is there, or will there be any way to import existing playlists in to version 2 when it goes stable/live?

But I use multiple accounts on that PC
I do this as well on both a PC and Mac; I am the only user on both computers. Fortunately I only want to use IS on one account per computer and have tried to hide it completely on the profiles that I don't want IS showing up.

Have you tried logging in on the alternate profiles and seeing if it works?

It does not. Because it installs itself into the current user folder and the login information is lost. And wanted to ask here before I use up my installations.

But the responses so far - yours being an exception - have been less… helpful. There might be a way, though. I could give access privileges to iStripper folder to all local users I want to run it from. But I just wanted to ask in advance how to best go about it.

Ah well.

But I use multiple accounts on that PC

I do this as well on both a PC and Mac; I am the only user on both computers. Fortunately I only want to use IS on one account per computer and have tried to hide it completely on the profiles that I don't want IS showing up.

Have you tried logging in on the alternate profiles and seeing if it works?

Normally, you could install a program on one PC and make it available for all Users that use this PC. So on iStripper, if I install it for my admin account and my normal user account on the same PC I already used up the two allowed installations?@echnaton192 That is correct.
You agree with the Terms and Conditions when you install the software. The rules clearly state, accounts are for a single user only and you are allowed 2 installations.... for example on a desktop and a laptop. No single user should need more than 2 installations.
If you want to use the software, you need to log on to a computer where you have it installed.
If it is determined that you broke the rules, your access rights can be terminated and the software would stop working.

From the User Manual.......
Can I install on several computers ?
Yes. We grant you a licence for two computers.
Once you have installed iStripper on one computer and created your account, install the software on the second computer and register using the same login and password.

If it happens that you need to install again, make sure you uninstall one licence first (without uninstalling your collection).
If you encounter a message too many installations please contact the customer service.

I am installing it on one Computer. But I use multiple accounts on that PC. One is for administrative purposes. One is for for work stuff. One is for gaming. For security purposes, the main Windows account should not have admin privileges. As such, some malware is stopped because it is not allowed to deeply root itself into windows, except for privilege escalation exploits.

According to the TOS, that should be legal as long as it is the same PC and I am the only one using it. On other software I could chose to install the software for the current account only or for all users on the same PC. But instead of installing itself into c:\programs\istripper it uses c:\users\username to install.

How am I not abiding to the TOS by installing it on one PC, so that all users on that PC are able to use it as long as it is only me using it? It is a mild inconvenience to only have it on one of the windows accounts of the same PC. But escalating this to an assumed breach of the TOS is a bit much in your reply, don’t you think?

Normally, you could install a program on one PC and make it available for all Users that use this PC. So on iStripper, if I install it for my admin account and my normal user account on the same PC I already used up the two allowed installations?

@echnaton192 That is correct.
You agree with the Terms and Conditions when you install the software. The rules clearly state, accounts are for a single user only and you are allowed 2 installations.... for example on a desktop and a laptop. No single user should need more than 2 installations.
If you want to use the software, you need to log on to a computer where you have it installed.
If it is determined that you broke the rules, your access rights can be terminated and the software would stop working.

From the User Manual.......
Can I install on several computers ?
Yes. We grant you a licence for two computers.
Once you have installed iStripper on one computer and created your account, install the software on the second computer and register using the same login and password.

If it happens that you need to install again, make sure you uninstall one licence first (without uninstalling your collection).
If you encounter a message too many installations please contact the customer service.

@PSeusDO
Oldest reset. Please, use this thread https://www.istripper.com/fr/forum/thread/28643/165?post=791439 for your next request after a Too many install message.

@echnaton192 one user allowed 2 installs normally, sometimes 3 if you ask for it. Definitely not allowed to share one account with other users.

Normally, you could install a program on one PC and make it available for all Users that use this PC. So on iStripper, if I install it for my admin account and my normal user account on the same PC I already used up the two allowed installations?

@PSeusDO Wrong thread, you need to post in this thread ...
https://www.istripper.com/forum/thread/28643/1?post=449733

I use different Windows Users for different tasks, I installed the models on a NAS. How do I enable iStripper to multiple users? Do I really have to install it for every user? And does that count as "one install"?

@echnaton192 one user allowed 2 installs normally, sometimes 3 if you ask for it. Definitely not allowed to share one account with other users.

@PSeusDO

You will be better off posting here

https://www.istripper.com/forum/thread/28643/164?post=791434

That thread is monitored for install resets

Hi there,
I've had to restore my hard drive twice today, resulting in 'Too many install' error. Now I cannot login. Could I please get some help. Thanks

Hi there,
I've had to restore my hard drive twice today, resulting in 'Too many install' error. Now I cannot login. Could I please get some help. Thanks

Hi there,
I've had to restore my hard drive twice today, resulting in 'Too many install' error. Now I cannot login. Could I please get some help. Thanks

I use different Windows Users for different tasks, I installed the models on a NAS. How do I enable iStripper to multiple users? Do I really have to install it for every user? And does that count as "one install"?

@firstVGfan97 there's a thread on Discord I thought might help you.
But of course you might not be using Discord.
And the thread seems to have had many posts deleted when the OP left.
https://discord.com/channels/709339443777110026/915587019118370866/915648414769897503

Bonni Gee
Clara Mia
Julia Graff
Lana Lane (only newer cards, the one linked is the oldest card by release date) (only one nipple)
Lilly Bella
Tatiana Coco (only newer cards, the one linked is the oldest card by release date) (only one nipple)

All scenes work well for me.

Thank you so much @EverthangForever, for your wonderful contributions to embellishing the program and putting color into the visonnement of our pretty women shows.

I wish you happy holidays. Enjoy them. 😊


Toutes les scènes fonctionnent bien pour moi.

Merci beaucoup @EverthangForever, pour vos magnifiques contributions à embellir le programme et mettre de la couleur dans le visonnement de nos spectacles de jolies femmes.

Je vous souhaite de joyeuses fêtes. Profitez-en bien. 😊

Je ne joue pas aux jeux. Mais comme j'avais 13 crédits gratuits en essai et pas de cartes à gagner, puisque j'ai toutes les cartes régulières, je les ai joué pour gagner quelques crédits.

Ainsi j'ai fait 13 essais à 1 crédit gratuit, et j'ai gagné 9 crédits. (1 gain de 5 crédits et 4 gains de 1 crédit). 😊


I don't play games. But since I had 13 free credits to try and no cards to win, since I have all the regular cards, I played them to win a few credits.

So I did 13 trials at 1 free credit, and won 9 credits. (1 win of 5 credits and 4 wins of 1 credit). 😊

I'm fond of nipple piercings. But nipple piercings is not a specific category.
Please help me to complete my collection.
I allready have these ones :

Marica Chanelle
Eve Sweet
Agatha Vega
Clara Rene
Kristy Black
Sophie Ink
Wylette
Nuria Millan
Lola Bellucci

Lalita - Chaude Et Humide - f1737 - iStripper XXX
Barbie Rous - Naughty Barbie - f1731 - iStripper XXX
Octokuro - Boob's Night - f1751 - iStripper XXX
Ashby Winter - Lace Jewelry - e2027 - iStripper
Ryana - Air Trip To Heaven - f1747 - iStripper XXX
Dolly X - Hello Dolly - f1721 - iStripper XXX
Candice Demellza - Be My Sub - f1546 - iStripper XXX

https://www.istripper.com/forum/thread/29408/84?post=791331

Joyeux Noël à tous les 'fullscreen' spectateurs. 😎😊
Je serai absent pendant une semaine environ. Je vous reverrai bientôt.
Merry Christmas to all fullscreeners. 😊😎
I will be away for a week or so... will see you again soon.
FGA428-FGA435
Eight selected WebGL shaders remixed & converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform.
Standing or table work randomly applies to all these scenes
unless otherwise captioned.

https://scenes.virtuastripper.net/ET_FractalGardenA428-A435.zip
https://scenes.virtuastripper.net/SceneImages/ET_FractalGardenA428-A435.png

zip size = 3.03 Mb
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
https://www.istripper.com/forum/thread/27449/162?post=791332

@Ehrtes

I believe that you must have at least 1 credit in your account, to Unlock the event.
If you Have a Zero Credit Balance, the Event will not start.

The 13 Free Spin-Credits are displayed at the Bottom of the Slot machine.

You can Spin the Slot machine, but it will display an Error.

Zero Credits in the Account Balance
https://www.istripper.com/customdata/forum/2024-12-14/LxBRxy2H.jpg

Spin the Slot Machine will generate an Error
https://www.istripper.com/customdata/forum/2024-12-14/hiGwTO08.jpg

Now I have some credits, and when I spin, it reduces the Free Spin Credits.

But if you have Credits in your Account Balance,
then you can Play the 13 free credit spins..
I have played 5 times, my Free Spin credits left are 8
https://www.istripper.com/customdata/forum/2024-12-14/AFW4BoZl.jpg

Victoria Sweet exists.She has six solo cards from 1229 to 1234 in the 'a' cards.She also has four 'c' cards, one a solo.Her cards are only in the medium resolution.You need 40 cards (gold level) to see these cards in the store and have the ability to buy them.Her cards were released in 2012-2013.

Thank you so much for the info! Appreciate it

From the last TGIF-post: "Good Luck, today is Friday the 13th! 13 free credits of spin are waiting for you on the freshly unlocked Winter Slot Machine!"

There is even a screenshot, where free "spin-credits" are visible.

So no card release from the talent of the month in her own month?

I was thinking the same thing. Great model, no victory lap!

I don't think there are free spins.

If you place a "max bet" then one of the thinks you can "win" is free; as in free cards.

If you play the game, the top right of the screen shows the percent discount available for the bet you are making. For a one credit bet, you can purchase the cards displayed at 15% to 55% (which ever percent shows up) for example.
If you make the maximum bet of 10 credits, the discount includes, at the top end of the discount, Free (35% to free) This means you have won the cards on display for free. Not just any card, but the cards on the display of the slot machine.

good luck.

free spin-credits do not appear in slot-machine-screen.

are there any conditions that must be met?

Good Luck, today is Friday the 13th! 13 free credits of spin are waiting for you on the freshly unlocked Winter Slot Machine!

But wait! Let me review the past few days for you :

• Young and innocent Mia De Vil plays with her pink joystick in "Pink Gamer"
• When Inna Sea wears sophiticated red lace lingerie, "A Sea Of Lava" pours onto your screen... (also on mobile)
• Marichka Glory is so "Jeune Et Jolie" (young and pretty)
• Mina Von D is stunning in the cosplay "Moanlander" - I love the way these pants hug her crotch
• Ahhh !!! Alissa Foxy has finally decided to come and help me clean my house ! Am I not lucky ? Alissa, you're such a gorgeous "Foxy Maid" (also on mobile)

• On Saturday, Nicole Rae will remind you the famous story of " Amour & Châtiment" (also on mobile)
• And on Sunday Shelena will close the week as it started, in "Pink Is An Attitude" (also on mobile)

In VR 180:

Pink again, with the delicious Charlotte Grey :
https://www.istripper.com/vr180/detail/7b568886dd020e3a


WINTER SALE - Slot Machine

Enjoy the great return of our Winter Slot Machine, its max bet 10 give you access to a 100% discount and 13 credits of spin are offered to celebrate the last Friday 13th of 2024 !

Visit the event tab of your app and enjoy!

So no card release from the talent of the month in her own month?

f1699 - Mathilda Scorpy / Bad ! Bad Girl !

Mathilda is not my usual type, but her attitude and movement overcome any "type" issues I may have. She's just sexy; not my favorite, but sexy. That being said, this SEC show has a little bit of riding with a handheld toy. In one clip, she rides the toy for about 30-45 seconds. It's short, but nice.

f1701 - Mathilda Scorpy / Looking For Attention

Another Mathilda show, and in this one she does quite a bit of riding. She's using a toy on top of a towel, so it doesn't stick to the floor, but she leaves it inside and bounces up and down on it anyway! First, she does a front-facting ride for about 1.5 minutes, then she turns around and does a rear-facing ride for another minute. Again, she's not my favorite, but this is a pretty good riding show.