Hi! Please re-upload older shows from @Carstrip. The links to them no longer work.

Try this Post
https://www.istripper.com/forum/thread/29408/42?post=673020

@Borsti - I do not know what response you expect if all you do is post "?" - why should you expect anyone to make the effort when you made so little?

Tks @Socialhazard nice to know 😊👍

free credits

😀😀A ce sujet, il vous reste 15 heures pour profiter du bonus de recharge de 20% supplémentaire de crédits par transaction 😊😊

😀😀 On this subject, you have 15 hours left to take advantage of the recharge bonus of 20% additional credits per transaction 😊😊

?

free credits

Not counting the demo from which it is cut, there is one standing explicit clip at 4:05 long. The card is a little bit fuzzy in 3K and I have reported it so hopefully it will be fixed soon.

Can anyone tell me if there are any standing clips in the Alissa/Kelly Christmas SEC? Thanks.

@EverthangForever

Awesome stuff. 👍 😎

Everything works as it was supposed to work.
My Issue was Unique to me and My Collection.
Not a BUG, not an Issue anyone else will encounter.

Now I can close this thread.

The error was an ID TEN T error.
ID 10 T error !
😋

@Philours

sent you a PM

@stefnev1 😉
@Wyldanimal, So you tell us 😄
Did you use a wallet not linked to iStripper? 😊

@stefnev1

sent you a PM

@Philours
Oops, je voulais répondre à @Wyldanimal mais j'ai cliqué trop vite sur l'icône citation.

Oops, I wanted to answer to @Wyldanimal but I clicked too fast on the citation icon.

Strange as it may seem
It took me 11 hours to figure out why I wasn't seeing the NFT card in my Collection.

Oui @stefnev1 je sais. Mais Wyld demandait içi pour des achats effectués sur OpenSea. J'informais simplement que l'ajout se fait également sur mon application. Bien sûr en utilisant le même wallet.
Aurais mal compris le post de Wyld? 😕
Yes @stefnev1 I know. But Wyld was asking here for purchases made on OpenSea. I was simply informing that the addition is also done on my application. Of course using the same wallet.
Did I misunderstand Wyld's post? 😕

Je n'ai rien a faire. La carte achetée s'ajoute automatiquement a ma collection Trading Cards. Et cela très rapidement après l'achat 😊
I have nothing to do. The purchased card is automatically added to my Trading Cards collection. And that very quickly after the purchase 😊

And that's normal because your wallet is linked to your iStripper account. It's the first thing to do and that was explain by @celine CQFD 😎

Je n'ai rien a faire. La carte achetée s'ajoute automatiquement a ma collection Trading Cards. Et cela très rapidement après l'achat 😊
I have nothing to do. The purchased card is automatically added to my Trading Cards collection. And that very quickly after the purchase 😊

https://www.istripper.com/forum/thread/29408/78?post=757486

FG864-FG874
Eleven selected WebGL shaders remixed & converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform.
Standing or table work randomly applies to all these scenes
unless otherwise captioned. FG874 is a three model scene.

https://scenes.virtuastripper.net/ET_FractalGarden864-874.zip

zip size = 298 Kb
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
https://www.istripper.com/forum/thread/27449/147?post=757487

? How does a Member get a Purchased NFT card added to their Collection?




On the site
https://app.dolz.io/
you can already Buy and Sell the 1st released iStripper NFT cards

The Links will take you to OpenSea.io

Card g0045
https://opensea.io/collection/dolz-x-istripper-g0045

Card g0032
https://opensea.io/collection/dolz-x-istripper-g0032

If you make an Offer that is accepted, or you Buy a Card offered for Sale
when you complete the purchase
it is added to your OpenSea.io account
https://opensea.io/account

And you can also see it in your Linked Crypto Wallet.

Since the Dolz.io trading page is not yet ready.
How Does a Member who has Bought an NFT card from the OpenSea.io Market
Add it to their iStripper My Trading Card Collection?

Thanks for that speedy response and command Wyldanimal.

DOH! I just missed my name is all.. I skipped right over 59.

visit the Girls Store Tab
type in the text filter box

/regex .

yes, just like shown, Forward Slash regex space Dot

Sort By date of release, Descending
take away, the Coming soon Shows.
And any Show released After the 31st of January.
( also Take away all of the Gay.iStripper cards, if they are part of your Collection ( 92 shows ) )

You are now left with the total of Shows available that count. 5531

Out of curiosity how is the number of shows determined as I have listed in my collection 5555 shows. But I know I am missing some from early early.

Or even better if NATO actually acted on what was so obviously going to happen. 💛💙

😠👎

how to top the list? 😍

the list is not a 1st place, 2nd place, 3rd place.... list..

It is just an Organized list by Date that the Members Joined iStripper
Of the 250 members that have a full or close to full collection.

There are 104 members with a full collection of 5531 Shows
Listed from the top to the 104th member on the list, in order of their join date.

how to top the list? 😍

😆 Yeah well the first thing @Robbie2022 needs to do is buy another 4700+ cards to even get close the list. So no need to rush on the elimination plan just yet. We're all safe for now, from hitmen at least. 👍

But not from crazy little idiots in Russia. 😠

The picture says : January 2022 😕

If only we could put the clock back and anticipate certain evil happenings soon to follow. Or even better if NATO actually acted on what was so obviously going to happen. 💛💙

how to top the list? 😍
Buy every card available and hire a hitman to remove all those above you 😊

That is a joke, guys 😊😊😊

That could be a joke, but there really is no other way 😆

Pauvre @rebailne 😰

👍 😆 😎

how to top the list? 😍

Buy every card available and hire a hitman to remove all those above you 😊

That is a joke, guys 😊😊😊

how to top the list? 😍

oops; It will be modified asap. Merci @stefnev1 😉

The picture says : January 2022 😕

@EverthangForever and @TheEmu, thank you for all your help! I think I'm getting the hang of it. Scenes seem pretty powerful. So far my scenes are pretty empty, but I kind of like them that way. :)

Thanks again.

This is the january 2023 iStripper’s Hall of Fame !

• Collection award Rewards the 3 members who have purchased the biggest number of shows during the month.
• Full Sets award Rewards the 3 members who have completed the biggest number of full sets of models' shows during the month.

These members get a decoration on their profile picture for one month! (Make sure you have a nice avatar picture on yours!)
You will also find here a ranking of the top 250 active members with the largest collections of shows. If there is equality between members, they are sorted from the oldest to the most recently registered.
Congratulations to all!

Virtuagirl 2012, Barbie White, Kari & Susan

@dyxsej23cy Hi, If it happens again, you could try with a different VPN. You could also install our current version https://www.istripper.com

다음에 오류나면 해당 파일 올리도록 할게요

@VincentSnyder hi 😉
For each model clip in a .scn you can set what will play
(standing or sitting) using the allow or deny parameter
in each clip node. I tend to avoid using 'allow' as it seems
to be very specific to selecting clips for what you list after it.

Under the Clip: node..
Its a bit tricky because Totem only allow using certain terms
for this and neither 'sitting' or 'standing' are used.

Sitting uses 'table' which includes 'fronttable', 'behindtable'
unless you directly specify to deny use of these.

Standing is what remains after you apply..
deny: table, cage, top
and this includes using pole unless you include that in deny:

In the clipsprite node you can adjust the SittingHeight (in pixels)
&/or the StandingHeight

For SittingHeight I usually adjust the model size to accomodate
a taller model like Verena Maxima in kneeling pose

For a StandingHeight I usually adjust for her being in front of a pole.
Example:

clip {
id: Clip
//allow: table, pole
deny: top, inout, cage
nameGlowColor: 0, 1, 1
}

camera {
type: 3D
angle: 45
pos: 0, 0, 1272


clipSprite {
pos: 0, 205, 700
sittingHeight: 290
standingheight: 365
resolution: 20
scale: -1.0, 1.0
source: Clip
}
}

https://www.istripper.com/forum/thread/27449/146?post=757389

@VincentSnyder ..welcome Vincent..pls use the Scenes Discussion thread (here) for general questions..

Are there any scenes that play only table poses at a particular sittingHeight? Or only play standing/pole poses at a particular standingHeight? If not, how would I write a scene clause that does that? I know how to edit scene cards, and I've made a very basic black-screen scene of my own, but I don't know how to tell a scene to play table poses at x height.

Also, can a .scn file filter out cards to play, or do I have to use the disable features in iStripper to do that before I launch the scene?

@TheEmu said..

Yes, there are many such scenes. In fact almost every scene. There are relatively few scenes (though they are not rare) that allow both table and non-table clips for a particular place in the scene and, as far as I am aware every use of a clip has has an appropriate standingHeight or sittingHeight clause.

Are there any scenes that play only table poses at a particular sittingHeight? Or only play standing/pole poses at a particular standingHeight?

Yes, there are many such scenes. In fact almost every scene. There are relatively few scenes (though they are not rare) that allow both table and non-table clips for a particular place in the scene and, as far as I am aware every use of a clip has has an appropriate standingHeight or sittingHeight clause.

Thanks for all these great scenes!

Are there any scenes that play only table poses at a particular sittingHeight? Or only play standing/pole poses at a particular standingHeight? If not, how would I write a scene clause that does that? I know how to edit scene cards, and I've made a very basic black-screen scene of my own, but I don't know how to tell a scene to play table poses at x height.

Also, can a .scn file filter out cards to play, or do I have to use the disable features in iStripper to do that before I launch the scene?

I think it's clear I've upset quite of lot of people with this post.
Hence, now withdraw from Forum posts and vow never to return again, especially to post any further messages.
My apologies to everyone that I have upset and/or offended.
Good day.

https://www.istripper.com/forum/thread/52245/3?post=756944

I want her to come back. 😭

🔥🔥🔥🔥

@dyxsej23cy
Have you some error messages in the vghd.log file located in the Data folder ? It's a text file so you can open it with the notepad.

사용하다가 몇일 지나서 갑자기 프로그램이 하얀상태에서 먹통이 된다.

그리곤 재설치에 카드들도 재설치해야되고... 시간이 너무 오래걸린다.

해결하는 방법 ?

@aljey,

I do mean the checkbox in the settings tab

This is very interesting. I found that parameter in the plist file. It wasn't there when I first checked. When I unchecked the checkbox, it appeared. It's name is crashReportingEnabled and it's a boolean variable.

However, when I turned it off and back on it did not seem to affect the behavior of iStripper on my Mac. But, you are using Ventura and I'm still using Monterey as my OS.