@bigjpres,

Je n'ai rien contre l'évolution de l'application. Mais, tout comme vous, lorsque je suis dessus, je consulte la page des nouvelles et pour démarrer je clique sur l'onglet Extrait. Un bon moyen de tester de nouvelles cartes et d'y voir des ventes 'flash' ou de sélectionner 7 modèles que je possède. Cela me manque dans la nouvelle version, c'est pourquoi j'utilise encore une ancienne 😊

I have nothing against the evolution of the application. But, just like you, when I am on it, I consult the news page and to start I click on the Extract tab. A good way to test new cards and see 'flash' sales or to select 7 models that I own. I miss this in the new version, that's why I still use an old one 😊

@Philours

How does one get the old version? Starting today, 2.0 locks up when I run it. I have rebooted, and uninstalled and reinstalled it, and it still locks up and cannot be used.

On the website, I only see an option to download 2.0.

https://www.istripper.com/forum/thread/52964/1?post=763710

iStripper에 관한 모든 것 / Nouvelle version Beta de iStripper !

C'est avec une grande fierté que nous vous dévoilons aujourd'hui la nouvelle version Beta d'iStripper pour Windows ! https://www.istripper.com/binary/beta/1_2_510/setup-istripper.exe Un nouveau design...

@bigipres

I don't know exactly, but I found this link on the forum😉

https://www.istripper.com/forum/thread/54767/1?post=779768

この주제に関して見る事やデータへのアクセスは허가されていません。

Thanks, that got me working again. There are definitely things I liked about 2.0, but until the bugs are fixed, I'd rather not be required to use it. I've spent lot of money on these models and don't want to have to fight bugs to watch them. Especially the current bug where it won't even launch for me, hehe.

2.0 shouldn't be on the main download page, the bugs are really bad right now. I love this product, but this is alarming to me.

What do you edit in the registry to go back to the main distribution? 2.0 is totally broken right now. I can not click on anything. It keeps opening balloon pop ups like nuts.

New version was running a tutorial. It's a bit cumbersome when you start 10 shows. But when the tutrial got to the end the GUI started working. May be a good idea to pin a note on th egistry key to uedit to change to main branch (with disclaimers on registry editing of course).

I don't know anything about registry keys, but 2.0 is what is offered from the main site, so I would assume that is what is considered main distribution now. Take that with a large grain of salt, though. Someone from the team can correct me if this is wrong.

If you need an older version, a few posts above yours is a link to manually install an older build.

If you need an older version, a few posts above yours is a link to manually install an older build.

on the Main Page the Beta version 2.0 is offered now to All.
The Team wants as much feedback from all types of Users, not just the well experienced Beta users.

If After you Install the Beta 2.0 and want to go Back to the Stable Release.
Go to Settings, Put a Check in Advance Settings.
then Scroll all the way to the Bottom, and Switch the Version Type from Beta to Stable.

You will then be Switched to the Stable Version.
Automatically Download and install the Stable version
The App will Close,
and then Re-Start when the install is complete.

2.0 click on user icon
https://www.istripper.com/customdata/forum/2024-10-25/LTV9olzY.jpg

2.0 click on Settings
https://www.istripper.com/customdata/forum/2024-10-25/m7F7n9qp.jpg

2.0 click on Advance Settings
https://www.istripper.com/customdata/forum/2024-10-25/v32fydEG.jpg
https://www.istripper.com/customdata/forum/2024-10-25/8obuLzTZ.jpg

2.0 Scroll all the way down and find Version Type
https://www.istripper.com/customdata/forum/2024-10-25/86C1a9tF.jpg

2.0 change from Beta to Stable
https://www.istripper.com/customdata/forum/2024-10-25/OB6eCNoY.jpg

2.0 Popup to Update
https://www.istripper.com/customdata/forum/2024-10-25/borfHDfp.jpg

2.0 update in progress to 1.2.552
https://www.istripper.com/customdata/forum/2024-10-25/ZdA1LkPB.jpg

Here is a demo Video After the Current Beta 2.0 build 1023
there will be a short Tutorial you will have to complete.

Click the Play toggle button to play a Model
Click on the Model to Enlarge the Model
Click on the Model to Reduce the Model
Click on the Play toggle button to stop the Model
Click on the Tutorial finish popup to finish the tutorial

If you want to go back to the Stable version 1.2.552
follow the steps above...

Install and run Beta 2.0 build 1023 - Complete the Tutorial - then revert back to stable version 1.2.552
https://wyldanimal.com/videos/from-beta-20000-to-stable-12552.mp4

Just got update to Beta 2.0 build 1025. The menu (when you click on the profile icon) is in the wrong place every time you start iStripper. Far down on the right. If i change the size of the window, it fits again.

Build 1025
The software takes about 4 minutes to launch the UI. Then the home page is incomplete, the coming soon cards for the 11/20 and 11/21 are missing. All the features in the Top News area have no pictures.
In the vghd.log file I've a ton of these lines (one per card and I've 6250 cards) :

2024-11-19T14:22:09[QtLog::Log] WARNING[{ViewModel::Collection::AbstractCardModel::removeCard:738} f1656 not in model]
2024-11-19T14:22:09[QtLog::Log] WARNING[{ViewModel::Collection::AbstractCardModel::removeCard:738} f1656 not in model]

I went back from 2.0 (build 1025) to 1.2.552 because:

• Overall performance
• Cannot disable demo auto download (Sometimes also not worked if i activate all cards), is way better with 1.x because i can simply disable it.
• Clarity of the UI

I had installed 2.0 since July 2024. 1.x feels better.

Build 1026
All is good now, no more thousands lines in the vghd.log file and the start is as quick as before.
Thanks to the developers 👍

My global feedback on iStripper 2.0 interface is unfortunately not positive.
iStripper 1.* versions do give to me a way more beautiful, easier, less cumbersome, more confortable, more customizable and more pleasurable experience on almost all aspects.

Build 1026
I've spoken too quick. I've hundreds of this lines in the vghd.log file with the 2 cards f1718 and e2026 :

2024-11-20T14:48:50[QtLog::Log] WARNING[{ViewModel::Collection::AbstractCardModel::removeCard:740} f1718 not in model]
2024-11-20T14:48:52[QtLog::Log] WARNING[{ViewModel::Collection::AbstractCardModel::removeCard:740} e2026 not in model]

Comment ça se passe avec cette bêta ? Il y a-t-il encore des dysfonctionnements importants ?

Comment ça se passe avec cette bêta ? Il y a-t-il encore des dysfonctionnements importants ?

Et bien pour faire court, je dirais que c'est en travaux. Mais soyez assurer que tout est fait pour améliorer la situation dans les plus brefs délais.

Et bien pour faire court, je dirais que c'est en travaux. Mais soyez assurer que tout est fait pour améliorer la situation dans les plus brefs délais.

Merci pour ce retour rassurant, je vais donc rester tel que je suis.

Dans les plus bref délais ?

Je n'en suis pas certain @Philours. Cela fait 3 ans que j'attend après des réparations de clips de cartes, bien que je relance l'équipe. Ce devrait être simple pourtant.

Je suis bien content d'être resté sur ma vielle version du programme qui fonctionne très bien et répond à mes besoins.

De plus depuis que j'ai un PC performant avec une meilleure carte graphique, Je n'ai plus aucun problème de saccade.

Tous ces changements sont faits pour les besoins des nouveaux produits de Totem, afin d'augmenter leur rentabilité. Produits dont je n'ai pas besoin personnellement.

Il y a toujours des bogues avec ces nouvelles versions, qui n'en finissent plus de finir.


As soon as possible?

I'm not sure @Philours. I've been waiting for 3 years after card clip repairs, even though I'm relaunching the team. It should be simple though.

I'm glad I stuck with my old version of the program, which works very well and meets my needs.

What's more, since I've got a high-performance PC with a better graphics card, I no longer have any jerkiness problems.

All these changes have been made to meet the needs of Totem's new products, in order to increase their profitability. Products I don't need myself.

There are always bugs with these new versions, which never end.

Bah @ComteDracula, tu sais bien ce que disent tous les entrepreneurs de travaux. C'est la réponse type pour rassurer le client😊
Je suis toujours sur une ancienne version également tant qu'elle reste suffisamment fonctionnelle😉
J'ai cependant un pc secondaire où je teste épisodiquement la nouvelle version.
Quant aux réparations d'anciens spectacles, je crains que cela ne soit pas une priorité pour iS😕