Age Verification
This website contains age-restricted material including nudity and explicit content. By entering, you confirm being at least 18 years old or the age of majority in the jurisdiction you are accessing the website from.
I am 18+ or older - Enter
I am under 18 - Exit
Our parental controls page explains how you can easily block access to this site.

New beta version of iStripper!

  게시판 / iStripper에 관한 모든 것

Wyldanimal
중재자
Joined in Mar 2008

3961 글
May 17, 2023 (edited)
Even better would being able to switch between rendering the scenes at full screen size and rendering them in a resizable minimisable window in a similar manner to all of the video players that I have seen.

With a little bit of software, you can create a Virtual Monitor ( up to 4 of them )
Then using OBS you can create a PIP window view of this Virtual Monitor.

you can run multiple copies of OBS to create a PIP for Each one of your Virtual Monitors.

I'll edit this a put some sample images here.
Screen Captures, Capture the Virtual Monitor as well.

note: the 2nd and 3rd screens are not Real, only Virtual.
but they are captured when you make a screen capture.

added 2nd screen playing a clip on each screen
using OBS to create a PIP of the Virtual Monitor.
https://www.istripper.com/customdata/forum/2023-05-17/dBjPodgs.png

running a Scene on the 2nd Virtual Screen
https://www.istripper.com/customdata/forum/2023-05-17/5ZFQyrbT.jpg
https://www.istripper.com/customdata/forum/2023-05-17/ONBeCWmL.jpg

added a 3rd Screen
had to Quit and Restart iStripper so it inventoried the new 3rd screen.
set the settings to use the 3rd screen for the Scenes.
https://www.istripper.com/customdata/forum/2023-05-17/Sl3fAy22.jpg

Then stacked it on Top of the Real screen 1
https://www.istripper.com/customdata/forum/2023-05-17/Jqpe47qj.jpg

running a scene on the 3rd screen
https://www.istripper.com/customdata/forum/2023-05-17/9N6p5k0G.jpg

and a 4th screen
https://www.istripper.com/customdata/forum/2023-05-17/NrLllIRO.jpg

all screens 1920 x 1080
gneas
Joined in Jan 2010

59 글
May 17, 2023
The beta is not working for me at all. 😭
I can see in Task Manager that the process starts, but it crashes and ends pretty much immediately.

I'm gonna take a wild guess that it's because I'm still on Windows 8.1? 😎
(Yeah, yeah.. I know.. I'm a dinosaur😛, but my pc won't support Win10 and I'm taking my time to buy a replacement - indecision is a terrible thing!)

Had to revert to an old version, then update in the settings page to the latest version, so I'm back to 1.2.378.

Can anyone confirm the system requirements for the new beta, please?
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023 (edited)
Man, I just noticed the new big pictures in the "other cards for this model" grid. Nice! I can actually see and read them at 4K now!

I also noticed that, but I prefered the old size and would much prefer being able to resize them as we can in the store and for My Collection. This is particularly true for those girls who have many cards, such as Viola, as we then have to scroll through several screens to see them all making comparisons more difficult than it need be.

I would also very much prefer it if this page showed all of the cards for the model, not just the "other" cards. With the current arrangement it makes doing anything systematic with those cards more difficult than it ought to be
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023
With a little bit of software, you can create a Virtual Monitor (up to 4 of them )

Agreed, but it really ought not be necessary to rely on third party software.

Windows 10, and I assume Windows 11, has Virtual Desktops built in to it. But I have never been able to use them successfully with iStripper Full Screen Scenes (not that I have tried very hard) because hitting any key exits Full Screen Scene mode making it impossible to switch back to the other screen.
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023 (edited)
On the first page displayed after the initial splash screen I would very much prefer to see the News section without having to scroll down. Currently the most prominent items on this page are the two that I am least interrested in seeing.

As the News section often contains important announcements - sometimes very important announcements - I think that it should be the first thing that is seen when the program starts.
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023
Although the new bar at the bottom of the screen is useful I do find it to be a little intrusive. An auto-hide option like that which Windows provides for the task bar would be appreciated. With such an option enabled the bar would then be visible whenever the mouse pointer was hovering at the bottom of the window and would quietly go away when it was not needed.
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023 (edited)
A clarification regarding my previous post
https://www.istripper.com/forum/thread/52963/2?post=763764
iStripper에 관한 모든 것 / New beta version of iStripper!
With a little bit of software, you can create a Virtual Monitor (up to 4 of them ) Agreed, but it really ought not be necessary to rely on third party software. Windows 10, and I assume Windows 11, ha...
when I said "we then have to scroll through several screens" I was using "screens" loosely - I really meant "windowfulls". Not everybody uses the GUI at its maximum size, especially when trying to do something systematic with a set of cards that involves using a second program at the same time. It is easier to work with two windows open side by side than to keep on bringing one and then the other to the front of the window stack - especially when you are trying to compare data in one window with that in another.
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023
A ***** thing.The resizing button at the bottom left of the top scrolling area of the Featured page is difficult to see and therefore easily overlooked - I only found it by accident when I was surprised that this area suddenly and unexpectedly changed its size and it took me quite some time to find out how to shrink it again.
guillaume
운영
Joined in Aug 2022

39 글
May 17, 2023
The beta is not working for me at all. 😭I can see in Task Manager that the process starts, but it crashes and ends pretty much immediately.I'm gonna take a wild guess that it's because I'm still on Windows 8.1? 😎(Yeah, yeah.. I know.. I'm a dinosaur😛, but my pc won't support Win10 and I'm taking my time to buy a replacement - indecision is a terrible thing!)Had to revert to an old version, then update in the settings page to the latest version, so I'm back to 1.2.378.Can anyone confirm the system requirements for the new beta, please?

Hi, can you please do the following:
  • Install the new beta but don't launch it.
  • Go into your data folder (by default, C:/Users/[your_user]/AppData/vghd/data) and find "vghd.log" and remove it.
  • Launch iStripper. Wait for it to crash and note the exact time.
  • Go into Windows "Event Viewer" and see if you can see anything related to iStripper at that time (most probably in the "Windows Logs => Applications" section).
  • Send me (e.g. via Manue at the support or directly on discord if you're using it) your vghd.log, anything you may have noticed in the Windows Events Viewer, as well as the exact time the crash happened (please include your time zone with it) so I can take a look at it on our end.

Thank you very much
guillaume
운영
Joined in Aug 2022

39 글
May 17, 2023
YOUR FEEDBACK / COMMENTS / SUGGESTIONS:Please click on the 'feedback' link in the drop-down menu of your profile.This is not working for me. 😕 I didn't have feedback yet just testing the button. 😄2023-05-16T10:05:03[] WARNING[QWindowsWindow::setMouseGrabEnabled: Not setting mouse grab for invisible window QWidgetWindow/'MenuClassWindow']

Hi, thank you for your feedback! What a shame you couldn't indeed report it in the dedicated feedback section for it :p

Can you please confirm that the other actions in the dropdown menu do have the desired effect? If so, can you please confirm that you've got a file called "application.cds" in your data folder (C:/Users/[your_user]/AppData/vghd/data) ? The app doesn't crash, there's just no effect when you press the button? Does it close the dropdown menu when that happens or does it stay open?

Thank you and glad you enjoy the version so far besides that!
desexyvideoclub
Joined in Sep 2016

108 글
May 17, 2023
Regarding 1080p 60 screen resolution = I can confirm that unlike the none-beta version, When going full screen HDR 1080p , the Beta program supports the HDR function, with 60 FPS. Unlike the normal program which turns off HDR (4k is still not supported.
  • This might be just my screen that has the problem, maybe in other screens and other windows versions, it works with 4k?
Sexy3DBoy
Joined in Jun 2011

479 글
May 17, 2023
Ça beta test à fond 😎
TheEmu
Joined in Jul 2012

3309 글
May 17, 2023 (edited)
Regarding my previous post regarding the resizing button on the Featured page
https://www.istripper.com/forum/thread/52963/2?post=763770
iStripper에 관한 모든 것 / New beta version of iStripper!
A ***** thing.The resizing button at the bottom left of the top scrolling area of the Featured page is difficult to see and therefore easily overlooked - I only found it by accident when I was surpris...
It now, I am happy to say, is very visible. I do not know if this was due to a deliberate change or if I was initially ***** from a glitch that made it hard to see. If it was the former then thank you for the rapid reaction.
vg4us
Joined in Dec 2008

121 글
May 17, 2023
In genera; I would say that it works well. I did notice some graphics artifacts by my systray. I then went full screen and came back. The artifacts are gone. I'll try to screen capture if I see it again.
anigmarvo
Joined in Mar 2008

42 글
May 17, 2023
First of all I agree the slider for card size is important. As someone who works in accessibility in games, players with different needs need to have fine control over that. Also the color choices (red and green) over dark grey is a poor choice for people with protanopia (most common colorblindness). There is more stuff on that aspect that requires considerations, like text sizes for headers, links and more, but I'll leave it as is for now. Let me know if you want to know more.

On another topic it would be better to have ways to sort and filter the main screen content. Personally the feature banner is too big and it makes more sense to have the newest cards as the first category, not the most popular.
Pervybonz
Joined in Jan 2012

11 글
May 17, 2023
Hopefully one of the next improvements will be the ability to filter out the various clip types, like turning off the swing clips without having to go into every single show and de-selecting them individually. That can't possibly be that hard. You already do it for the hotness level.
Benawi3
Joined in Dec 2017

9 글
May 17, 2023
Love the new design! 😊
Socialhazard
Joined in Nov 2020

1154 글
May 17, 2023
YOUR FEEDBACK / COMMENTS / SUGGESTIONS:Please click on the 'feedback' link in the drop-down menu of your profile.This is not working for me. 😕 I didn't have feedback yet just testing the button. 😄2023-05-16T10:05:03[] WARNING[QWindowsWindow::setMouseGrabEnabled: Not setting mouse grab for invisible window QWidgetWindow/'MenuClassWindow']Hi, thank you for your feedback! What a shame you couldn't indeed report it in the dedicated feedback section for it :pCan you please confirm that the other actions in the dropdown menu do have the desired effect? If so, can you please confirm that you've got a file called "application.cds" in your data folder (C:/Users/[your_user]/AppData/vghd/data) ? The app doesn't crash, there's just no effect when you press the button? Does it close the dropdown menu when that happens or does it stay open?Thank you and glad you enjoy the version so far besides that!

When I click the feedback button the drop down menu closes and nothing else happens. All other buttons work and I have a file "application.cds". The app doesn't crash.
Dfner
Joined in Feb 2018

640 글
May 17, 2023
Looking good judging by Wyldanimal's video! I especially like that the card size for "other cards by same model" is not microscopic anymore.

I would like to test this myself, but I would also like to be able to easily revert back to the version I'm using (1.2.360), just in case. The thing is that I can't find my installation file for that version anywhere anymore... I must have deleted it at some point. I know there's later finished version available, but since I have had no problems whatsoever with 1.2.360 I'd like to revert to that if need be. Is the installation file for that version downloadable somewhere?
seal73
Joined in Oct 2011

12 글
May 17, 2023
The beta is not working for me at all. 😭
I can see in Task Manager that the process starts, but it crashes and ends pretty much immediately.

I'm gonna take a wild guess that it's because I'm still on Windows 8.1? 😎
(Yeah, yeah.. I know.. I'm a dinosaur😛, but my pc won't support Win10 and I'm taking my time to buy a replacement - indecision is a terrible thing!)

Had to revert to an old version, then update in the settings page to the latest version, so I'm back to 1.2.378.

Can anyone confirm the system requirements for the new beta, please?

Same for me except I'm on windows 7
Wyldanimal
중재자
Joined in Mar 2008

3961 글
May 17, 2023 (edited)
@Dfner

Easy to Revert.
Quit iStripper.
Make a copy of the Current BIN folder and call it BIN12360
So you now have a BIN folder and a BIN12360 folder.
Both are all the same files.

Now Install the Beta, it will overwrite the Current BIN folder..

Test, Test Test the new beta..

When you want to revert

Quit iStripper
rename the current BIN folder to BIN12510
then rename BIN12360 to BIN

You can now swap back and forth between the two versions
in a Matter of Seconds.

I have Many Versions installed this way.
I just rename the folders as I test them.

This is a small sample of the versions I can Swap back and forth too.
https://www.istripper.com/customdata/forum/2023-05-17/d26utA3a.png

if you need the installers
1.2.510
https://www.istripper.com/binary/beta/1_2_510/setup-istripper.exe

1.2.378
https://www.istripper.com/binary/beta/1_2_378/setup-istripper.exe

1.2.360
https://www.istripper.com/binary/beta/1_2_360/setup-istripper.exe
stefnev1
중재자
Joined in Jul 2008

4589 글
May 17, 2023 (edited)
This new version is still a 32bit software, so no management of the RAM above 4GB 😪

When I click on Feedback, my browser (Firefox) is opening on a blank page with "iStripper 2 Beta feedback" in the center. No place to write something.

With my dark personal skin, some texts are not visible. The palette seems to have changed a bit.
pickle1
중재자
Joined in Mar 2019

1353 글
May 17, 2023
Same for me except I'm on windows 7

Support by Microsoft for Windows 7 ended in January 2020.

It is just not economically viable for companies like Totem to continue to provide versions that can run on such outdated software.
seal73
Joined in Oct 2011

12 글
May 17, 2023
Support by Microsoft for Windows 7 ended in January 2020.

It is just not economically viable for companies like Totem to continue to provide versions that can run on such outdated software.
I know this, but I can't buy a new pc
stefnev1
중재자
Joined in Jul 2008

4589 글
May 17, 2023
The carousel has gone too. No more giant pictures now 😉
Number6
Joined in Oct 2010

1169 글
May 17, 2023
The carousel has gone too. No more giant pictures now 😉

😰
Number6
Joined in Oct 2010

1169 글
May 17, 2023
With my dark personal skin, some texts are not visible. The palette seems to have changed a bit.

I hope this is going to be fixed. It doesn't affect all of my skins so I am not sure exactly what they have changed.

I don't want to go through dozens of skins (assuming I can actually find what they have changed) and fix them only to have them revert it back again.😰
Dfner
Joined in Feb 2018

640 글
May 17, 2023
@Wyldanimal

Thank you very much! This is very useful information. I did as instructed and now have two bin folders and beta running nicely. Probably won't need the reverting back to 1.2.360 but nice to know that there is an easy option for it available.
pickle1
중재자
Joined in Mar 2019

1353 글
May 17, 2023
@Dfner - it doesn't take much to switch - apart from waiting and occasionally having to restart the PC to make it complete 😊

I have been on the beta for some time and I switch almost daily because there is a feature of the new version that makes it difficult for me to QA the upcoming shows so I flick back to 378 to do my QA work 😉
bigjpres
Joined in Jun 2018

14 글
May 17, 2023
So far I've enjoyed all these changes, they're great!

One request, if possible: I was hoping with this improved UI that I would be able to tell which cards I currently have downloaded or not, when I'm on a girl's page (the one where you see all of their cards). It shows what's in your collection, what's not in your collection, and what's coming soon; just like the non-beta version. However, if would be nice if it were possible to tell which ones are in your collection and downloaded, or not downloaded. Maybe by the color of the tag?

Anyway, again this is great, thank you.

아직 참여할 수 없습니다.

iStripper の無料ユーザーはフォーラム内の주제に参加したり新しい주제を作ることはできません。
でもベーシック카테고리には参加できコミュニティーと接することはできます!