1) For skins, have an option to select skins by either skin thumbnails or by a list option.
2) Bring back favorites in the My Collection section.
3) As @pumpdude48 posted

Perhaps a new higher level than 3 diamonds for those of us with most or all of the available cards.

Preferred for those members over 3000 cards.

My main concerns are:

I would like to improve the control of Full Screen mode. Using hotkeys (Arrows) or mouse (left click and wheel) (As pointed out by TheEmu)
1) Adding the ability of choosing the order of .scn to be played
2) When choosing full screen of a particular model, allowing to change the sceneries but keeping always the same model in the new scenery (regardless of any other additional models)

Also the playlist management should allow you to create and modify your own playlists as said above and regain interaction between playlists (right side of GUI) and main list of cards on the left. In my opinion VirtuaGirl management of whole cards was better as discussed many times in some threads. ( To solve this personally have made my own management apart thanks to the help of Dorsai.)

I didn't know about the backspace key functionality in the forums either. As DANO70 says it would be nice to have this as a visible button that we could click on. It would also be good to have a refresh button as well that acts as if F5 had been pressed. Not only would having these visible make the fact that the functions exist be obvious they would also be useful to me because much of the time when using the GUI my keyboard is just out of reach and it would help a lot is I could do everything using my mouse (actualy a track ball) instead of having to stretch to reach the keyboard.

Hello Richard and Team Totem. Could you please consider adding:

1. The option to start "Fullscreen" from the menu icon like in VirtuagiirlHD
2. More "Fullscreen" backgrounds that include multiple girls at the same time (2, 3 ,4, 5...)
3. A favorite girls option like in VirtuagirlHD
4. Allow us to chose how much more frequently favorite girls show up (2, 3, 4 times more offten then non favorite girls...)
5. A girl playlist option that allow us to list which girls we want to see

Thank you Team Totem.

The first five things that came to mind........

• The ability to click forward and backward in five, ten, twenty and thirty-second intervals with the option to choose which


• An option to play all clips in order all the time


• The ability to play one card on a loop without needing to deactivate all other cards


• Bring transparency back


• A fully functional screensaver

+1 Better search filters/tags
+1 Visible vote counts
+1 Summary of clip types and erotic levels
+1 Better playlists

• I've brought this one up before some while ago but it never gained traction: an option to completely disable mouse click interactions on models when using apps in fullscreen (or fullscreen borderless), or to simply be able to disable them. While it's less of an issue with games like WoW and LoL, it's problematic in FPS games (i.e., Mass Effect, TR, etc). Relatively ***** quality of life feature, but it'd be great if it could be done.
• White/blacklisting of clip types, but not so much as to delete or permanently remove such clips - I tend to not prefer swing clips, pole clips and cages as they can take up lots of realestate when gaming, but would still want them.
• Option to let us display our forum avatar on the client like how it was in earlier iterations of iStripper.

While I think video quality could be improved, it's pretty much a given and doesn't seem to necessarily fit the purpose of this thread. Same could be said for bugs.

I didn't know about the backspace key functionality in the forums either.

Using a G502 mouse with Back bound to a thumb button just for the backspace functionality :)

I'll go with @orclover 2-5 plus @Uliubu clip details on the store tab.

Fullscreen given a new name 'Theatre'
Scene given new name 'Stage'
Next, Now Playing, and History of Stages in a side bar
Ability to ***** Stages into side bar
Manual Raise or Lower & Zoom hotkeys for clipsprites or FOV independant of the .scn code settings

1. Full screen transitions/multiple models
2. Card plays all the way through clips using all transitions
3. Creating tags for clips, creating playlists based on said tags. The 3rd party clip player no longer works with this iteration of istripper.
4. Community tag system...when reviewing reviewer can check list of tags. So when reading a review you might see Splits(9), Large Labia(8), and know that a number of people have tagged it...
5. Less cumbersome playlist system. And being able to change clip list inside of girl profile by size, clip type, clip order, nudity...like we used to.

👍👍👍

For some reason I completely forgot to mention what to me is a major outstanding bug - one that myself and several others have reported. Can you please fix the program so that if we set the show duration to "All Clips" that ALL of the clips actually get played.

This problem may actually be a symptom of a bigger problem that also results in at least the following problems

1) Top of screen clips rarely get played

2) If progressve hotness is selected the first clip played often has an inappropriately high level of eroticism

The suggestion by @EverthangForever to rename the Fullscreen mode to something that does not get ***** with Full Size desktop mode is a good one. His suggestion of Theatre seems a good one to me, though I would stick to Scene rather than renaming it to Stage because I don't think that the current name is causing any problems (I also think that Scene is a better, more generic, name anyway).

In one of my previous posts in this thread I suggested introducing a delayed start option for animate: clauses in .scn files. This is a more detailed proposal to show that it should be very simple to implement


Currently an animate clause has the form

animate : Period, Mode, Curve, Attribute, Amplitude, ...

e.g.

animate: 10, PingPong, InOutSine, pos, 200, 0, 0

causes the named Attribute, e.g. pos, to vary using an expression something like

Value = InitialValue + Amplitude*Curve(mod(ElapsedTime,Period));

with some extra logic being needed to handle the mode (Forwards, Loopforward etc.)

I suggest adding an optional numeric parameter between Period and Mode that, if present, specifies a StartDelay for the animation. StartDelay would default to 0.0 if it was omitted. All that would then be required is to change the expression to be

Time = max ( 0.0, ElapsedTime-StartDelay );
Value = InitialValue + Amplitude*Curve(mod(Time,Period));


If StartDelay were 0.0 it would have no effect, if it were greater than 0.0 then then Value would remain unchanged for the specified time and if StartDelay were less than zero the initial phase of the animation would be changed.

This simple change would greatly simplify making complex movements. In the earlier post I was thinking of the case of simple cyclic movements at abitrary phases to each other, but another use would be to string together a series of movements by delaying the starts so one movement begins when and where the previous one ends allowing one clipsprite to be moved several times in arbitrary ways without having to resort to using "clones" and modulating their opacities.

@theemu , I very much support the need to delay animations, hence the required syntax above.
On the question of retaining 'Scene' as a name. I mentioned it because there have been several posts
recently of clips being described by some users as ' scenes'. I don't think it is 'generic' at all. More like a
throw back to the word 'scenery' which could describe outdoor scenes or adjuncts to a stage. 'Stage' is more absolute in defining the performance area. But, hey..all good food for thought no doubt :-)

The option to bind Mousewheel up/down to modify scale on fullscreen.

Or maybe picture up/down keys, or something similar, going into options first feels ancient.

Or you could add in a new zoom factor only for behind/on bar clips that is independant from the old fullscreen zoom.

@theemu, to labour the names point a little more. ..
Act 1 scene 2 sounds a tad like
Card 1 clip 2 for many folks I guess.
Hence the *****.

@darn5 agree..and make FOV easily dynamic as you say, during Desktop & Fullscreen performance.
Fullscreen authors are sick of kneeling poses so favored by Production getting out of vertical FS range or missing out on overhanging legs entirely during closer table work.

I'd quite like to see a "big ass" category and for a few free credits I'd be willing to categorise the girls for you 😊

LOL
I bet you would

@darn5, the mousewheel zoom function in fullscreen stage shows sounds intuitive and great 👍

- The ability to jump forward in clips, or backwards. Say 10, or 20, seconds with one click.

• Fast forward the clip
• Setting for the program to automatically resume '*****' downloads.

I'd appreciate a back 5 seconds button like the others.

Also bringing transparency back (it's still used in older cards when u move models around anyway)

Hentai cards you mentioned.

More variety in costumes (Cosplay, BELIEVABLE schoolgirls [some are just too slutty to be enjoyable for me])

More known models and models of different body types - not only skinny Ukrainians (that's why that Latina of today is great and why the Roberta Gemma would be a great addition)

I really can't think of anything...

... keep doing what you're doing! :)

+ VIP Membership: All new shows added automatically to your collection (if you have credits)
+ Command-line options to make iStripper useful as a tool for my desktop
+ Keep this girl: All shows of this girl automatically queued
+ Shareable playlists: Community generated playlists of girls that can be shared
+ Videoblocks backgrounds for full screen (whatever happened to that @Rex?)

1 - New clip category: "No clothe". In theses clips, model is naked from the beginning to the end. No strip, just dance.
2 - Possibility to have more than 1 dancer in big mode (100%) per screen .
3 - Possibility to sell models at xx% of original price (xx fixed or depending on acquisition date).
4 - More black models.
5 - In store, possibility to sort by discount.

5 - In store, possibility to sort by discount.

I think this could really use some emphasis. I don't know about anyone else but for me it's a chore having to scroll through hundreds of cards for their discounts during TGIFs. Not talking about the discount carousel.

+1 for no clothes category. Cards where models bare them all, start to end, in every clip would be great.

@Wuzthis: the new category I mentioned was not for entire card but only for few clips of card. For each card, today we have following clips categories:

• trailer
• no nudity
• partially nude
• totally nude
• XXX

You can choose to play only some categories.
I suggest to add "no clothe" category (maybe "XXX no clothe" too).
This allows to play only clips in your collection where model is totally nude from the start to the end of clip. In each of my cards, I noticed there is about 1 to 5 clips where model wears nothing.

1 - "No Clothes"

We already have a "Starting Nude" tag which covers that

4 - More black models

That's casting and not part of the software they're planning to make changes to

@91hebasu:
1 - Ok, I missed that tag. I will try this, thanks.

I think the quality of the older cards was really better.
My 5 things are :

Adjustment control for :

• Sharpness
• Brightness
• Color intensity
• stepless slow motion

What Wyldanimal said. It is totally rediculous that you can't Create and Save a Playlist and USE it in Full Screen mode for more than ONE model at a time.

Every time I want to use a certain collection of my model cards in Full Screen, the only option is to MANUALLY check each individual card I want to include in My Collection. That is just plain stupid to have to do.

I do NOT use iStripper in the Desktop mode. I use VR Occulus Rift in SCENES I have created. The immersion is incedible. But the iStripper user interface for it SUCKS now by not being able to create and use a FUNCTIONING multi-model playlist for Full Screen use.

I honestly think Totem has not considered the various CULTURAL ways their iStripper program is used by different people around the world. In the U.S., anybody who uses iStripper in Desktop mode at their WORK environment would have to be insane. They would be asking for a Sexual Harrassment accusation and most likely be fired from their job WHEN (not IF) caught. And understand..."if caught" does NOT mean someone would have to "catch" them WHILE they were using iStripper. I did Network Administration for over 40 years, and ANY IT department would EASILY be able to "catch" someone doing it. The iStripper software has to connect to the Internet to "verify" the user's cards, and the Network Administration tools used by the IT department would raise all kinds of flags about that while also creating an AUDIT of the user's computer usage. Stupid computer users in the U.S. get fired every day because they think they can get away with using "porn sites" on their work computers at work. Even though I am fully retired and only use iStripper in my residence, I would NEVER use the Desktop mode anywhere in a work environment monitored by an IT department. And when I am at HOME using iStripper, I'm not going to use it in Desktop mode when I own a $600 Rift that is incredible in Full Screen mode.

As an aside, I have quit purchasing new iStripper cards because of the above limitation in the software. There are much easier ways using other companies software to use my Oculus Rift with "nude model" applications than with iStripper right now. FIX the inability to create and use a Playlist for Full Screen that will allow using more than ONE model at a time, and you then have an outstandind VR application in iStripper worth spending more money on model cards.