Hi guys,

I'm sorry but the functionality of previews doesn't work at all on my pc. Last preview was downloaded yesterday evening and with the discount of 12%. The settings is the default one, i.e. download previews each 10 minutes, however, no new previews even after one hour of running today... :-(

Preview are pushed only when :
1/ software is ON
2/ You are using your computer (mouse moving for instance)

Tested today again, software is ON and I'm using my computer, push set to 10 min. Normally the new cards get pushed (today Cara Mell XXX), but the push does not work. So for me the push doesn't work for any XXX cards, only for 'normal' cards.

Previews tab, 10 min. set, 6 days in use:

I confirm that cards F and C (both XXX series) are not sent automatically in Previews at all.

I confirm that for cards E and A the push working for all resolutions include 720 and 1080p, and new releases 2017 of cards E pushed in Previews also, and covered with discount 12% as each other 3rd card in the queue of automatic push.

I confirm the constant repeats in the push, but not in most part, only in half of each 7 cards. And I understand why it may be done in such manner - the discount on each 3rd card in the 7 slots tunnel just placed on the near cards by +1 offset with one 2-4 cards repeat. It can give more sales because with offset the discount covers almost all pushed cards presented to users, but it take x2 time.

Needed include series F and C to push, and option to enable/disable the repeat in Previews. For users with small amount of purchased cards needed the half of 7 repeat in the push for ability to buy the discounted cards without long waiting them in the next cycle, but for users with big amount of cards the repeats in the push only take x2 time and will not increase the sales. It's just my thoughts, I don't know what is really done and for why.

Hello Everybody

We have released a new version of iStripper and it comes with some useful features.

NEW FEATURES :

• One click purchase : Once activated, you'll see a "1-click purchase" button instead of the usual button. This function allows you to buy the show without clicking the confirmation window. You can enable/disable this feature in settings > controls
• Better "Featured" page synchronisation : Featured tab synchronizes and you don't need to do it by yourself anymore. Now you won't miss our weekends sales anymore.

BUG FIXES:

• Bug #1582: 11 previews instead of 7 previews.
• Bug #1627: Empty cards (Without clips) should be marked as "Not downloaded" when the user rebuilds all.
• Bug #1629: The notification should not be displayed if user is idle.

DISCOUNTED SHOWS IN PREVIEWS TAB

Last but not least this version includes the ability for us to discount pushed cards in previews. And the good news is that we want to test it badly :)! So, from now on and for at least a few days, 1 preview out of 3 will be discounted by -12%. This discount only applies to previews pushed by the software, not those you add manually.

Don't hesitate to contact the support if you have any trouble to update istripper or any question.

Cheers

still no delete previews? that cross icon should appear again when you put the mouse over the preview logo across the girls' card, don't know why you got rid of such a good thing.

REX , Like Richie94, whenever I have tried to upgrade to the latest version . istripper has disappeared, amnd whenever I try to reactivate it a window appears saying " Set up has detected that istripper is still running. pPlease close all instances of it now, then click OK to continue, or Cancel to exit."
1) I was totally unable to find iStripper anywhere on the computer at this time and therefore was unable to either proceed with updating nor accessing my existing version; that is until I rebootted the computer and reinstalled my existing verion.
2) Yes my collection is held on a 15TB external drive.

Having been throught this rigmariole 3 times, I have ababndoned trying to updat my version until I am assured that it will proceed smoothly.

@Donatien : can you see iStripper in the task manager (right click on the task bar the click on task manager) ?
The binary is installed in c:\users\username\appdata\local\vghd\bin (on my Win10 version).

2 problems that I see after updating:
1) Now previews automatically try to download themselves onto my machine and there's no way to disable it.
2) filtering took a ***** blow as I can no longer choose multiple categories when filtering cards. ie. big boob and student tag couldbe checked before and now only either student or big boob could be checked. If this never was a thing then my bad, in that case make it a thing.

You can set the preview downloads to Never in advanced settings. Also in the latest version, you can disable all your previews via the new button on each girl in the Previews tab :)

You can still check multiple categories eg.; Big Boobs and Student. I'm on the latest Beta 1.2.170.

Before I change the files and reg values to .170 I say about good news - cards C and F appears in Previews under version 1.2.168! Look the screenshot - cards C in slots 2 and 5, and discounted card F in slot 6. I haven't any troubles with .168, but time to update for testing new features.

I'm getting new preview downloads but it just plays the same one over and over until I click them off. I just disabled previews until this is fixed.

You can set the preview downloads to Never in advanced settings. Also in the latest version, you can disable all your previews via the new button on each girl in the Previews tab :)

You can still check multiple categories eg.; Big Boobs and Student. I'm on the latest Beta 1.2.170.

Cool, how did you get .170? it says i'm already up to date

Go into the Bugs & Fixes section. The Beta download for 1.2.170 is 3rd from the top in the 'Sticky' area :)

As far as I know, the Betas don't show up in the GUI updates. Only official releases.

Don't worry about using Betas here. They work just fine usually. Most are the exact same programs as the previously released ones with a tweak or two added for testing :)

i suggest to extend discount to al pushed preview :)

Bonjour à tous,

Je pense que cela a déjà été signalé mais l'affichage sur des écrans en 4K est très petit ...un correctif serait bien venu.
Ma seconde demande serait que l'affichage petit ne soit plus limité à 60 % mais à 100 %

Je serais très ravi une fois ces demandes effectuées
Par avance merci

@Franckyt13 je doûte fort que tes demandes soient résolues d'ici peu parce que des utilisateurs qui utilisent des écrans 4K (ici), il ne doit pas y en avoir des masses.
Je n'en ai pas et je ne suis pas préssé d'y passer vu leur prix actuel.

When the small size is bigger than 55% on 1920 pixels width (on standard full HD display) then even only one performer (not ten) often go out from the screen area with lost control via mouse, the software terminate this show and start next, so it's a really very difficult to make more than 60% in small size without breaking the playing sequence and to it remake all related aspects in a tons of software releases. I suppose such many times repeated requests "please give to us more than 60% in small size" are equal to "please recode all your software a million times just because we want so". Hahaha, and the team can make it for us users and we all will have a tons of bugs instead of nice jumping pussies on our screens ))) "You ask this million times? Well, finally you've got it, enjoy that you wanted" hahaha

@Amelly,
Avec un écran 4K, les menus sont écrits en tout petit, ça t’abîme les yeux de cliquer sur les menus...
Ensuite pour le mode grand, ils l'ont porté jusqu'à 200 % mais je ne vois pas l’intérêt : 110% tout au plus. Par contre, porté le mode petit de 60 % à 100 %, ça permettrai d'avoir 2 à 3 modèles en équivalent grand pour un écran de veille !!!

4K resolution is much better in the work tasks, but at home a now most of people use 1080p or less (notebooks, etc). Of course all world migrate to 4K some time later, in the same manner as it was always (720 to 1080, etc). Until the world stay behind, on 4K just needed scale the UI of any software with OS tools to readable state. Asking the world to be compatible to 4K a now is just spend a time for nothing. Who not ready for tune their systems by the self those should buy 4K later.

still no easy way to delete previews from system?
Another problem I've come across is when downloading the cards' videos the GUI is selecting 480 and not 1080 only knew because the file name was mo_480_xxxxx to fix this I had to press the play icon and change settings using the gear icon, pause the movie and then download. Is there no other way to set this permanently because when I turn off the pc and come back to it this problem happens again :(

hi, just updated and am very unhappy with the new istripper ! also why are the video previews now locked ? if they are staying locked and cant be seen then im done with istripper..... wish i had never hit the update button !

Have checked that iStripper UI is not scaled by standard OS facilities, but possible for 4K users will effective the solution with external manifest of application, posted by lukaszr in "Bugs & Fixes > Interface too small (4K screen)"

http://www.istripper.com/forum#/forum/thread/34786/last#post516359

この주제に関して見る事やデータへのアクセスは허가されていません。

I apologise if I've missed anything above, but I am still only getting a maximum of 7 girls in the Previews section, using the latest software version and not the 11 girls mentioned in the first post on page 1.

The 11 girls appearing in previews was a bug. Totem's new policy, for now anyway is that we all can only view 7 previews at a given time. We can switch out any or all of the 7 at any time but can only run 7 previews at once.

This, or so I believe is to prevent clubs and the like from running Totem's software for their clients to show endless clips of different models, without buying a single card. I fully support Totem in this.

About "only 7 previews at once": no inconviencies here, we always can stop the autopush and replace current previews to any other which want to see
About "no easy way to delete previews": it's just not needed, the app must delete them automatically when their size reaches the default or setted limit

For me the most annoying part is that cads on the preview tab have a tendency for "lock" - I was expecting random cards there, but I get the same cards repeated for hours - so push every 10 minutes hardly makes any sense...

Haven't put my finger on it yet - but it does look like some weird bug to me... And it's ***** especially in the moments like now, when all cards are (in my opinion) so bad, that I disabled previews entirely (see screnshot). It *does* look like the only way to make it roll the dice instantly again is to buy a card, but that's no go for me now. It will start to "move" eventually again, but it just seem like odd to push the cards in the loop for hours... :(

Yes, I see exactly the same thing in my preview window.

The same dozen or 20 cards keeping rolling around, even if I have disabled that particular card previously, it keeps rolling through again.

And I also see that if I buy I card from the group that I get a "new" one or two that have not appeared previously.

Hi all,I have just forwarded your messages to our developer

What a terrible update is out today? I just update iStripper and it break ressolution in programm, in show too. All is big and muddy! And show now this friezes!

Woah I usually don't read these updates threads but I'm glad I did before I updated...sheesh!