Andreina Deluxe !!!

I think the laws in Europe control it.When a model asks for her material to be removed.. it effectively means immediately.I may be wrong ... if so... cest la vie 😊

We have an agreement signed with the models that clearly specifies the usage done of their content. The reason why we quickly accede to their request for removal is ethical, we have the greatest respect for our models, we understand their life changes and we put a lot of energy into supporting them in their process...

One of the recent removals happened without any kind of notice beforehand. Can't remember who it was.

It was Karolina and the lack of notice was my fault.
Lynette sent me a "calm" request, whereas Karolina was completely in *****, that's why I rushed to remove her cards...

I think that giving us advance notice at all is actually quite generous.

The last thing Lynette or others (whose shows are removed from the store) want, is to make lots of people here rush in to buy her shows before they're gone 😄 At least the more "FOMO inclined" of us will be doing that.

One of the recent removals happened without any kind of notice beforehand. Can't remember who it was.

Looks like a great video. However, I don't have a vr headset yet. PC software movie & tv combines the left and right view into one, but the picture is often stretched out. Plus the video is often zoomed in and there doesn't seem to be an option to fix this. Do the cardboard and cell phone provide decent quality? If a headset is best, which headsets are a good option? Not sure how much I would use one, so want to be careful about cost. Thanks for any suggestions.

Yes, also appreciate receiving notice and as much in advance as possible. Don't have her in my collection, but in case this applies in the future.

I reckon Totem try to get us as much notification time as they can.
I think the laws in Europe control it.
When a model asks for her material to be removed.. it effectively means immediately.

I may be wrong ... if so... cest la vie 😊

Appreciate the heads up as well but was wondering if you guys found this out suddenly or for whatever reason have to remove these right away? It seems like kind of short notice unless there's other notification somewhere I don't know of or could have forgotten about. It is partly my fault I'm not on this everyday anymore usually only a couple times a week but even so this just seemed to come out of nowhere and may give some of us little or no time to act on it that's all.

Helene was another beauty. If I remember correctly didn't she have some sort of health issue (***** her neck or something) during her shoot and that was why she only had two cards? I thought I remembered reading that somewhere here about that years ago. Hopefully she's healthy and happy either way and who knows maybe she'll be back someday.

Hi all, If you want a refund, could you please send an email to [email protected]
Thank you

@goodwolf,
If your cards play, there is no need to ask for a refund.

If your cards do not play, or you no longer want them, you can ask customer service to remove them. You will get a refund for these cards.

Go to help in the app, click on customer service.

How to ask refund on the card 1204?

Hello ❤️

If you need some assistance : [email protected]

Have fun with iStripper ! 😎🔥

Thanks for the heads up!

Hi @XFO9232 I noticed you started with the very same card I did back July 2020.
Belka is a favourite indeed.❤️

All the best for Lynette! Superb woman! 💋
I'm glad I caught her beauty on iStripper now.
Better late than never.

hi

I wish a long and beautiful life to Lynette for the future 💋 And thank you to give us the best of you.

I love you for announcing this! 💖

Yep, she's already deleted from my collection. If a model wants to go, then I'm happy to let her go, with some exceptions, and use my refunded credits on some one new.

Maybe I'll just play once more, but then I'll ask for a refund.

OUCH !

Maybe I'll just play once more, but then I'll ask for a refund.

Sly 🐱

Maybe I'll just play once more, but then I'll ask for a refund.

Thanks for the notification 💖
I just archived 😎

Ditto😊👍

totally stunning.
Shelena stole my heart when she first appeared on iStripper and this is .... lost for words 😍😍😍

Thanks for the notification 💖
I just archived 😎

Ok, thanks for that it's appreciated.

Lynette's content (2012) will be removed from the site (not from your collection) on September 27, 2024.
It will remain in your collection if you have some.



Thank you

Hi WildAnimal!
Thanks you for your kind and detailed reply!
Starz 3D scene and Xtreme and works like a charm I noticed the zoom effects of starfields too but not fully past my head .
The reason must be that mentioned by you difference betwen the two stereoscopic technology I gues as I am i simple user with some basic regarding knowledge.

Also your new 3D wisper club scenes are very professional works I downloaded and tested them also yesterday, the built in podium zoom effects are very impressive indeed , as strippers are approaching and distancing during the shows.
Picture is very clean withour any vibration and no remaining multicontours of objects or dancing models. Just perfect.👌👌
By the way, I gues you used some shadding effect of models body in the single standing scene intentionaly it's very creative.Also the reflected double body shade of the models. Very impressive indeed.
Buy the way I have also two 3D LG TV from series 55LM660S purchased between 2012 and-2014.
I like them very much.
They do not have the problems of new TV' s with new ledpanels that ***** out if you use the brighness and backlight at more then 50-60 % as panels " ***** out" after a few year.
Some personal notice , I was born also in sixties almost same age.
Finaly I want to thank you again for all the creations of you regadles they are designed in 2D or 3D SBS. Hopefully you will create some new ones in both formats if you have time .
I hope your eye is not irreversible impaired maybe can be fixed by surgery. Are new methods developed recently and in testphase. Sorry for my comment, I do not want to get involved in your private life.
Wish You a nice and pleasant weekend

Slow Motion does exist.
However your level probably will not see it.

It is possible to get slow and pause as options for the right click on model (circle of icons).
It is possible to get either slow or pause (not both) as options for the left click on a model.

One must be platinum (100 cards) or higher to see these options, as it says in the help. I am not sure if this has changed.

Thanks for your reply. Sorry, it's a card animation, so I would need to know how to find a slow mo option in settings, if it exists.

The videos (if you mean the card animations) cannot be opened with anything other than the iStripper player.
Each clip is encoded to the user to which it belongs.
This is also why sharing the files (other than the *.demo files) is impossible. You cannot play another person's files; that person cannot play yours.

If you mean the bonus videos, then yes.
Simply download the video and save it with a name in the location of your choice.
(remember to choose the resolution, which is accessable as a gear icon only when playing the video in the app, or on the web)

@Calgon

This 3D graveyard Scene is really nice.
I like that you use your background switcher so the scene changes as it's playing.
I'll have to investigate, how you are doing the Depth for the background scenes.
Must be some Shader algorithm going on there.

Thanks for Sharing.

https://www.istripper.com/forum/thread/51751/1?post=750021

Hey, is there way to play the vids in slow-mo? I've opened advanced settings and looked in controls but no options are showing for slo-mo. Alternatively, is there a way to open videos in an external player? Thanks in advance.

Thanks to the developers and moderators for implementing the easier access to check the future and recently played queue.

Hello, Thank you for your lovely message ❤️ It is much appreciated 💋

3D SBS Graveyards for VR headset users.

Took ages to build due to some technical headaches with the fog and flames but mainly because every time I loaded the thing I would end up watching the show for ages. 😛

There's 11 backgrounds in this one so far.

Works well with a playlist of BDSM shows and some "dark" music.

Hope you all enjoy it.

https://bit.ly/3TK8pJM

@aloevera
Your English is fine. Better than many Native US persons...

I wrote more of a reply in the Discussion Thread..
https://www.istripper.com/forum/thread/27449/162?post=787710

@aloevera
Your English is fine. Better than many Native US persons...

this one, I tried to push the limits of what might be comfortable.
but if you catch the focus and keep it, the depths should be really strong.

WA_3D_SBS\WA_3D_SBS_XTREM.scn

How did you like my Starz 3D scene with the Starfield that zooms out past your head.
Well maybe on the 3D TV you don't fully see that.
On a VR headset, they should Fly right at you.

And I just got done converting the Whisper Club Scenes.
I hope they turned out just as well.

With the recent Release of the DOLZ XR content for the Season 4 NFT collection.
I thought there might be a few Quest 2 and Quest 3 users whom would also like to see some 3D scenes..

I too have LG 3D TV's Two of them in Fact.
with the Passive Glasses.
I have a 3D projector, that uses Shutter Glasses, but they are broken...
And, its a bit old and lower resolution. I think it is only 720p

Humm...
I actually Have 5 VR Headsets.
Sony Playstation version 1 and version 2 for the Playstation 4
and the new Sony Playstation for Playstation 5
a Quest 2, and a new Quest 3..

I also have two of these...
https://lookingglassfactory.com/looking-glass-portrait
and
https://lookingglassfactory.com/looking-glass-go


but as you have read, I have some issues with my left eye, and my Stereo Vision isn't good anymore.
In my mind, when I am adjusting the numbers between the Left eye and the Right eye.
I can visualize what I want..
I just can't Actually See it to know if it's how I intended it to look.

in the VR headsets, I can almost see the 3D effect, but not perfectly.

Thank you for your Comments

Hi WyldAnimal!

I have downoaded some of your 3D sbs creations what I found and I tested them
i.e. WA-Caught-In-the-Rainbow
WA_3D_SBS\WA_3D_SBS_XTREM.scn
WA_3D_SBS\WA_3D_SBS_3.scn
WA_3D_SBS\WA_STARZ_3D_SBS_1_WS_SF.scn
WA_3D_SBS\WA_STARZ_3D_SBS_1.scn
WA_3D_SBS\WA_STARZ_3D_SBS_1_WS.scn
WA_3D_SBS\WA_3D_SBS_1.scn
WA-Starz2\Starz4-3D-SBS.scn
All are brilliant professional works!👍👍
the 3D effect deepnes is far much better than in most 3D sbs movies released ,
regardles of they content (adult vs other) .
Also the design and concepts of screens are excellent. ( e.g Club , space background I guess)
I used for watching them an ordinary HP older laptop with pentium I3 processor , HDD and 8G Ram linked with my LG 3D TV ( using passive glasses)
Laptop could handle without freezing if other CPU or memory consuming programs does not running in the background.
the pictures does not blinking I did not see double vs many contour of object , modells , whatching them I don't had unconfortable eyes feelings.
The depness distance is smothly adjustable I mean if you change distance from Tv also the models are changing in wide range
Thanks a lot for the new 3D sbs creations also I will download and test them!
I hope you will make some others if you have time.
Anyway your highly profesional works and shares are much apprecieted by me!
All the best wishes for you from Hungary 😊
and sorry for my English

Ok, just finished the Whisper Club Multi-Girls Scene
I created a new version with a Stage in Both 2D and 3D
plus the Floor version in 3D without the Stage

Same File name as above

Download link
https://virtuastripper.net/@WA-MOD-3D-SBS-Whisper-Club.zip

Sample image
https://virtuastripper.net/SceneImages/@WA-MOD-3D-SBS-Whisper-Club-Multi-0002.jpg
https://virtuastripper.net/SceneImages/@WA-MOD-3D-SBS-Whisper-Club-Multi-0003.jpg
https://virtuastripper.net/SceneImages/@WA-MOD-3D-SBS-Whisper-Club-Multi-0004.jpg
https://virtuastripper.net/SceneImages/@WA-MOD-2D-Whisper-Club-Multi-0005.jpg

Browse all the Scenes
https://scenes.virtuastripper.net

👍👌💋

@WA

Adding another Two Scenes Converted to 3D SBS

Excellent work. These are fun. I've got something new coming soon as well.

Adding another Two Scenes Converted to 3D SBS
The Whisper Club
Single Standing, and Single Sitting

Download link
https://virtuastripper.net/@WA-MOD-3D-SBS-Whisper-Club.zip

Sample image
https://virtuastripper.net/SceneImages/@WA-MOD-3D-SBS-Whisper-Club.jpg

Browse all the Scenes
https://scenes.virtuastripper.net

This one took a bit of work to do...
I had to re-create all of the Assets

the Bar Background had the stage as front and center in it.
I had to remove the stage, and create the missing seating.

https://virtuastripper.net/SceneImages/Bar-background.png
original Image
https://virtuastripper.net/SceneImages/plan3.png

create a new stage image from the stage in the above image
https://virtuastripper.net/SceneImages/Stage.png

and the Mask for the reflections
https://virtuastripper.net/SceneImages/Stage-Mask.png

Then I needed to create the chairs seen behind the stage
https://virtuastripper.net/SceneImages/Chairs-Back.png

and with that, each element can be floating and placed in 3D space.

@WA

@Calgon

(x) Porthole
https://bit.ly/4grZlTq

This is a Very Nice Scene. Yes it's a bit heavy on the GPU rendering..

I couldn't resist...
I made a 3D SBS version, and sent you a Link to test out..
( I won't release my 3D Mod, but if you like it, feel free to tweak it and share your results..)

It looks great but stutters due to the double whammy of trying to run a difficult shader and then whatever else goes on in the PC getting that to the headset. I'll have a look see if I can find a better way to streamline the code.

What I've been doing on other shaders is doing the stereogram work at Shadertoy so that there is only one shader being run. This porthole scene has two copies already for the foreground and background and then all doubled up again for the left and right eyes, it was not my best conversion originally with 2 copies of the code and now there's 4 😕

Here's an example one I did on shadertoy so that you can see what's going on....
https://www.shadertoy.com/view/4fScRD

The key changes to the original code are to chop the screen into halves so that each half calculates the whole scene from a slightly different ocular viewpoint

void mainImage( out vec4 fragColor, in vec2 fragCoord )
{

// Define the interocular distance (adjust this value as needed)
float interocularDistance = 0.01; // Positive value for demonstration

// Compute normalized coordinates for the current pixel
vec2 uv = fragCoord.xy / iResolution.xy;

// Determine if the pixel belongs to the left or right eye
bool isLeftEye = fragCoord.x < (iResolution.x / 2.0);

// Adjust the UV coordinates for left or right eye
if (isLeftEye) {
// Left half of the screen
uv.x = (fragCoord.x / (iResolution.x / 2.0)); // Map from [0, 1]
} else {
// Right half of the screen
uv.x = (fragCoord.x - (iResolution.x / 2.0)) / (iResolution.x / 2.0); // Map from [0, 1]
}

// Adjust UV coordinates to range from -1 to 1
uv = uv * 2.0 - 1.0;
uv.y *= iResolution.y / iResolution.x; // Adjust y for aspect ratio

// Define the camera origin with interocular distance applied
vec3 eyeOffset = isLeftEye ? vec3(-interocularDistance, 0.0, 0.0) : vec3(interocularDistance, 0.0, 0.0);


vec3 ro=vec3(sin(iTime*.2+sin(iTime*.2)*.2),sin(iTime*.2+sin(iTime*.1)*.1),5.)+ eyeOffset;

All of the conversions I have done so far are raytraced shaders. If I can find the ray origin (ro) in this case in the original shader then I can hack it about as above and produce a sterogram.... and then converting that to iStripper is just a click of a button or two.

Helene and Gina Devine - check out their bonus videos! (the 2nd one for Gina)

When will you guys upgrade to using an 8k camera? 5k is outdated.

This is a report on findings, nothing more.

I know that search in the collection and store both work without the /regex.
I can search using simple search strings, such as (all within my collection):

• e001 gives seven results
• f101 gives seven results
• a161 gives seven results
• e1011|f1012|a1674 gives three results

with /regex it works like this (all within my collection):

• /regex e0 gives no results
• /regex e0|f0 gives results only for f cards, but not e cards
• /regex |e0|e1 gives 1414 results for all e cards
• /regex |e0|f0 gives 1362 results for low e and f cards

In short:
without /regex the pipe character (|) is only needed between any two search items
with /regex the pipe character (|) is also needed before the first search item

Am I mistaken? I certainly see it this way, as the search results I found based on many separate searches