Age Verification
This website contains age-restricted material including nudity and explicit content. By entering, you confirm being at least 18 years old or the age of majority in the jurisdiction you are accessing the website from.
I am 18+ or older - Enter
I am under 18 - Exit
Our parental controls page explains how you can easily block access to this site.

iStripper 2.0 stable - Q&A

  Forum / Tutto su iStripper

sjaakie
Da In Dec 2007

74 post(s)
Rende 1 :tEpe (edited)
A card starts to play.
Now I want to see more of this model.
I'll go to details.
Click on the name of the model on top.
Now I automatically come into the store.
It would be useful if there was also a tab collection here.
So I can see all the cards of this model that I own.

------
I found it: scroll down in details
jerki
Da In Nov 2011

1 post(s)
Rende 1 :tEpe
Bonjour,
Je suis sur macbook air, la nouvelle version est beaucoup trop lente pour pouvoir l'utiliser (naviguer dans les menus , et aussi les shows rame enormement)
Je suis revenue sur l'anciene version (non sans mal, car je ne connais pas trop l'univer apple)
D'autre personne on eu le même probleme ? et comment faire pour avoir une version qui ne rame pas ?
merci d'avance
redforleather
Da In Jan 2009

127 post(s)
Rende 1 :tEpe
I tried it but went back to the old version.

In addition to what has been said, the old version allowed me to skip more easily from clip to clip, by clicking on the card again, it would jump to the next clip, and the card seemed to remember when you had not watched the full show and play it from there.
And someone correct me if I am wrong but that function appears to be gone in the new version, and I found it quite handy to jump from clip to clip without clicking on the clip itself.

If in the new version, the clip list works differently and after clicking on one clip, it plays the show from there - on the old one it just plays the show and then moves to the next card - I might reconsider and I did not try that.

The scrolling down didn't work very well for me, either. So for the moment, I'll stick with pre 2,0.
Num1Fan
Da In Jun 2018

1 post(s)
Rende 1 :tEpe
I have re-installed the previous 64bit version, reasons:
1) 2.0 incredibly unstable for me, especially working with my approx 2000 playlists
2) App is much slower to load and render UI graphics than the old version
3) Personally I find the new interface less visually appealing, cluttered, and not very intuitive (I'm sure time would cure some of this)
4) I use clip and playlists extensively to pander to my striptease preferences. The 2.0 version is way less appealing for both of these because:
a) Clip list is harder to find and less clips are displayed on screen, meaning more scrolling/searching for what is playing or what I want to select
b) Adding clips to a playlist, for me usually a new playlist, is incredibly frustrating as I need to scroll to the end of the playlist page to find the new playlist for every clip I want to add
c) I cannot find any way to sort playlists, they are alphabetical a-z. I would preder ability to sort that includes the playlist create or modify date that is available in the file details in \vghd\data\playlists subdirectory
5) I want to still be able to add clips or entire card to the playing next list at any position rather than just first or last
spaceviper
Da In Sep 2009

7 post(s)
Rende 1 :tEpe
Bonjour, petit retour sur cette version 2.0 quand je lance un clip, à la fin de celui-ci l'image ce fige et le clip ne s'arrète pas. j'ai mis l'interface en français mais tout est resté en anglais. dans la collection impossible de trier par numero de carte croissant ou décroissant. quand je delete un show, il est impossible d'activer ou de désactiver la carte.

mise a jour, c'est bon l'interface est enfin passer en français
Manue
ATTREZZATURA
CUSTOMER SERVICE
Da In Nov 2014

1093 post(s)
Rende 1 :tEpe
Where is the list of clips ? Right click on a card in the collection tab or in the details page then click on "edit clips"
batavus
Da In Nov 2019

228 post(s)
Rende 1 :tEpe (edited)
I am more and more convinced not to switch to the new version istripper 2.0.
I think the new version is only tested by the team.
It should have been tested by people who know nothing about the new version and are seeing it for the first time.
misterpink
Da In Nov 2020

3 post(s)
Rende 1 :tEpe
Bring back ***** and drop for the queue.
Number6
Da In Oct 2010

1188 post(s)
Rende 1 :tEpe
I am more and more convinced not to switch to the new version istripper 2.0.I think the new version is only tested by the team. It should have been tested by people who know nothing about the new version and are seeing it for the first time.

Incorrect

I and many other iStripper users have been testing the "new" version for several months.

I am more than happy with this latest version. I certainly wouldn't want to go back to the old version.

As with anything new It takes a little time to get used to and just requires a little patience.

"Right Click" is generally your friend in the new version
Romla
Da In Jul 2016

172 post(s)
Rende 1 :tEpe (edited)
Bring back ***** and drop for the queue.

***** and drop is working in the Queue, but the Queue is much harder to use now in general. Previously you could open clip list and then open the queue as sidebar and you could add clips by dnd directly to the queue.

Now you need to open clip list by right clicking the card, add clips from the list by clicking on Add to Queue and then you need to switch to Queue to reorder the list if you want, but there are no clip numbers visible in the queue, so you are blind again. This is much much less user friendly than it was in the old version. Please bring back the Queue as sidebar again and the clip list could be full screen too.

Viewing photos is also inconvenient now as you could see all photos at once previously, now you must scroll like crazy and you always see only few of the photos. Zooming should be on mouse wheel too, which is not.

Generally I am not totally disapointed with the new UI, there are things which are better now, but there is also lot of things which are much worse or less user friendly. I still like the old UI more than this one.
Calgon
Da In May 2022

389 post(s)
Rende 1 :tEpe
@Number6

As with anything new It takes a little time to get used to and just requires a little patience.

I think there is, and has always been, a consistent complaint that the queue system is unworkable by many people. It depends how you use iStripper of course. For myself the queue sidebar is THE most important feature as I use it whilst on the fullscreen page and also the Collection page and Clips pages. You may be able to workaround it but that ***** any enjoyment of the system.... and then I downgrade back to the old version.
CygnusX1
Da In May 2014

3 post(s)
Rende 1 :tEpe
The Queue is a frontline function and should not be relegated to a second screen. I constantly edit my queue list on the fly. You just made it 100% harder. 2.0 looks really flashy but is far harder to navigate. Functions that were one or two clicks away are now three or four with ads intruding on my paid-for content. iStripper is a downloaded program made run paid-for content, yet it is now more like a webpage that is constantly selling more product. I think I'm deleting 2.0 and going back to a previous version.
Wyldanimal
MODERATORE
Da In Mar 2008

4023 post(s)
Rende 1 :tEpe
@CygnusX1

https://wyldanimal.com/videos/Quick-Play-a-selection-of-cards.mp4

Did you know that in 2.0
You can make a quick selection of cards in your Collection and then Play them Directly.
No Need to make a playlist, or 1st add them to the Que.

Make your Selection, Right click, Start
Quick and Easy.

Works in a playlist too
Select, right click, start
https://wyldanimal.com/videos/Select-Right-click-Start-works-in-a-playlist-too.mp4
Wyldanimal
MODERATORE
Da In Mar 2008

4023 post(s)
Rende 1 :tEpe
In the Queue View, you can change the order of an item on the Next list by ***** and Drop
https://wyldanimal.com/videos/*****-n-Drop-item-order-in-the-que.mp4

In a playlist you can also *****-n-Drop the Items to change the order
https://wyldanimal.com/videos/Change-order-of-items-in-a-playlist-with-*****-n-Drop.mp4
LiquidAgAggie
Da In Sep 2010

138 post(s)
Rende 23 :tEpe
Now you need to open clip list by right clicking the card, add clips from the list by clicking on Add to Queue and then you need to switch to Queue to reorder the list if you want, but there are no clip numbers visible in the queue, so you are blind again. This is much much less user friendly than it was in the old version. Please bring back the Queue as sidebar again and the clip list could be full screen too.

This! I use the queue exactly how you describe it, all the time. This is why I'm not updating to 2.0 until it's fixed.
Wyldanimal
MODERATORE
Da In Mar 2008

4023 post(s)
Rende 23 :tEpe
All about the Queue, Playlists, Previews, and Random mode
Here I try to cover many of the things that are being asked about
https://wyldanimal.com/videos/The-Queue-and-Playlist-and-random-mode.mp4

Wyldanimal
MODERATORE
Da In Mar 2008

4023 post(s)
Rende 22 :tEpe
Where is the List of Clips?
https://wyldanimal.com/videos/where-is-the-Cliplist-how-to-edit-the-clips.mp4

in iStripper 2.0 use right click on a card and select edit clips
But its more than just the clip list
we now have a Global Clip list for a card, and Local Playlist Clip lists for the copy of the card in a playlist.
The card in the collection view is the global card.
any edit to the list of clips made there, affects how that card is played globally.

If you add that card to a playlist, the global edit follows the card to the playlist.

If you add a card that hasn't been edited, the full card is added to the playlist
you can now open that playlist
and make a local edit to the copy of the card in that playlist
The edit to this card Only affects this copy of the card in the playlist

The card in the global Collection remains not edited.

when playing a card with an edit list of clips
the Settings for show duration affects how many clips will be played.

Make sure your show duration setting is set to how you want the cards to play.



TeflonChicken
Da In May 2019

8 post(s)
Rende 20 :tEpe
Previous poster asked if we can change the dark theme, a poster replied that we can set every background colour that we want.
I cant see an option to set background colour in settings, even with the advanced settings open.
Anyone want to tell me where this bacground colour option is?
Ullubu
Da In Dec 2011

750 post(s)
Rende 19 :tEpe
Anyone want to tell me where this bacground colour option is?

Under themes in settings.
There is Themes and Custom.
Choose custom to set other colors and even mix them.
There you can set a side pic also.
TeflonChicken
Da In May 2019

8 post(s)
Rende 17 :tEpe
Sometimes I swear I need new glasses, I looked at that setting several times but never thought to click on it.

Thankyou for taking the time to point that out.

Just reviewed my previous post and realised it could come across as somewhat aggressive, I have no excuse for that, but would like to say sorry to anyone I may have offended.
blubb1
Da In Nov 2010

2 post(s)
Rende 8 :tEpe (edited)
Not great.
Laggy, freezes all the time.
How do I see my previews as before?
Please add an option for smaller cards in the collection screen, this is not useful.
Filtering now stacks. Before it was (e.g.) "leather" OR "navy", now it is "leather" AND "navy". Can we choose the way this behaves?
Not very intuitive to find my stuff. Filter on the right side of the screen also feels off..

EDIT:
To add after some more exploring
How do I select a specific clip to play?
Gallery of a card was way more user friendly before. How is this a good idea?
Manue
ATTREZZATURA
CUSTOMER SERVICE
Da In Nov 2014

1093 post(s)
Rende 8 :tEpe
@blubb1 Hello,

Please go to our software' settings

Graphic render. Switch from CPU to graphic card

How do I see my previews as before? We can't anymore but we might add a different way to do it soon
blubb1
Da In Nov 2010

2 post(s)
Rende 7 :tEpe
@Manue
Graphic render. Switch from CPU to graphic card
it is already on that. And I know it is not the newest and best computer, but the old version worked just so much better. Just crashed when trying to actually play some shows.. Any way to go back?
Wuzthis
Da In Oct 2012

93 post(s)
Rende 7 :tEpe
@moohamin12Click on the Playlist button at the top right. There, you have a button to enable the previews at the top left of this tab.

that's the solution, is it?
batavus
Da In Nov 2019

228 post(s)
Rende 7 :tEpe (edited)
I am more and more convinced not to switch to the new version istripper 2.0.I think the new version is only tested by the team. It should have been tested by people who know nothing about the new version and are seeing it for the first time.IncorrectI and many other iStripper users have been testing the "new" version for several months.I am more than happy with this latest version. I certainly wouldn't want to go back to the old version.As with anything new It takes a little time to get used to and just requires a little patience."Right Click" is generally your friend in the new version

You need to get used to every for you new website, I agree.
But the old version works fine for me.
How do you explain all the complaints if the new version has been tested thoroughly ?
Sexy3DBoy
Da In Jun 2011

482 post(s)
Rende 6 :tEpe
De tout ce qu je lis sur cette version 2.0 c'est pas encourageant voire dissuasif de migrer.
HansSachs
Da In Mar 2016

995 post(s)
Rende 6 :tEpe (edited)
2) App is much slower to load and render UI graphics than the old version
3) Personally I find the new interface less visually appealing, cluttered, and not very intuitive (I'm sure time would cure some of this)
a) Clip list is harder to find and less clips are displayed on screen, meaning more scrolling/searching for what is playing or what I want to select
Totally agree with this.
batavus
Da In Nov 2019

228 post(s)
Rende 6 :tEpe
De tout ce qu je lis sur cette version 2.0 c'est pas encourageant voire dissuasif de migrer.

I couldn't agree more 😊😊
Number6
Da In Oct 2010

1188 post(s)
Rende 6 :tEpe (edited)
How do you explain all the complaints if the new version has been tested thoroughly ?

Because many people are too impatient and will not take the time to settle down and check the features in the software. Nor do they even take the time to see if a solution has been posted for the perceived problem.

How many complaints have there been about being unable to find the Clips list and how many times has someone posted the solution of right click on the card and select edit clips? Also you do not have to do this on the card details page. You can do it in the Collection and in Playlists - an improvement on the old system where you could only access clips from the card details page.

Similarly how many people have ***** about not being able to turn off previews and how many times has the solution click the Queue button and select Disable Previews underneath the Recently Played tab?

Yes there are still some issues (and some of these are being worked on). Not everyone uses the software in exactly the same way so there may be odd cases that come up that haven't been anticiapted.
lsmithiii
Da In Apr 2008

40 post(s)
Rende 6 :tEpe
@wyldanimal
My main complaint, that has caused me to revert, is that I can't shift click to select multiple shows to enable and disable them. I also can't shift click to import multiple/all playlist at one time. Is there another method of doing these things.

Non sei ancora autorizzato a partecipare

Come utente gratuito iStripper, non ti è consentito rispondere a un argomento nel forum o creare un nuovo argomento
Ma potrai accedere alle categorie e ai concetti di base ed entrare in contatto con la nostra comunità.!