@ComteDracula
C'est vrai le bouton de flèche droit ne change pas le modèle
Car il agit exclusivement sur un seul modèle ... Le modèle qui est répertorié en haut du code de la scène et dans FGA467 il s'agit d'un clip factice.
La chose utile à utiliser un clip factice dans une scène est que le code ignore ce que vous pourriez avoir dans «Next». Partout où les clips swing verre ou cage existent dans votre collection, le code les trouvera et initiera la scène
~~
Thats right, the right arrow button does not change the model
because it only acts upon one model in the scene --- the model which is listed at the top of the scene code ,
and in FGA467 it is a dummy clip. A clip with no clipsprite component.
The useful thing about using a dummy clip in a scene is that the code ignores what you might have in «Next». Where ever swing, glass or cage clips exist in your collection, the code will allow this scene time to find them and initiate the scene.

Thanks for the info @EverthangForever. 😊

Merci pour les infos @EverthangForever. 😊

EN
Unfortunately, I couldn't find a clear image of the musical dancers' "Anythin goes" scene from the second Idiana Jones movie. They're too blurry. I'm thinking of replacing it, but I can't find an image in the same spirit.

Perhaps somthing like a special animated effect of a twinkling star reflected on a glossy black floor. @EverthangForever: You're the effects specialist, so would you like to do some collaborative work on this?

Movie scene:
https://youtu.be/1DF7Ncz4VUU?feature=shared&t=70

FR
Malheureusement, je n'ai pas pu trouver d'image net de la scène "Anything goes" des danseuses de musical du film Idiana Jones 2. Elles sont trop floues. Je pense la remplacer, mais je ne trouve pas d'image dans le même esprit.

Peut-être par un effet spécial animé d'une étoile scintillante se réflétant sur un sol brillant noir. @EverthangForever: Vous êtes le spécialiste des effets, voudriez-vous participer à ce sujet ?

@smith2 sure..
here are four fragment shaders in the share thread history
you could use for this. Any of them would work OK 😊
You can speed up the movement easily for all of them
--
Voici quatre shaders de fragments dans l'historique du fil de partage
que vous pourriez utiliser pour cela. N'importe lequel d'entre eux fonctionnerait bien 😊
Vous pouvez accélérer le mouvement facilement pour chacun d'entre eux

FG104 has Totem's bgBlobs.fsh

FG065stars01.scn has TheEmu - Fairy Magic.fsh

FG400 has Totem's Floating.fsh

FG485 has BlancC's Start IridiscenceMod01.fsh

I have updated FGA467 yet again to run on a single background sprite.
I had pulled it out from work I did back in 2020 to now illustrate the
use of a dummy clip and the FGA467 I recently modified still needed removal of many
useless code strings. The ramp now shows as the intended background reflection image.
So that is now done 😊

This final zip can now be re-downloaded..& by overwrite/extracted to /scenes
https://scenes.virtuastripper.net/ET_FractalGardenA460-A467.zip

@smith2 you wrote:

https://www.istripper.com/forum/thread/27449/165?post=793785

Tutto su iStripper / Discussions for Scenes for Version 1.2.X Fullscreen Mode here

@smith2 Nous avons beaucoup d'plaisir avec votre «Time Machine». tks 😍👍 ~~We have a lot of enjoyment with your 'time machine' scenes. !!!!! I seem to have misplaced / lost this scene, when I change my...

I seem to have misplaced / lost this scene, when I change my PC.

I recently went through my scene collection and updated my Smith2 repository of scene files.
I doubt that I have all of them, but this is what I have collected.

https://virtuastripper.net/Smith2/

@Wyldanimal You've also kept some of the older versions. Thank you for this archival work. It's cool to have a third party resource if there's ever a problem with my google drive.

@EverthangForever

FG485 has BlancC's Start IridiscenceMod01.fsh

FR: Celui ci correspond à l'effet recherché.
Par contre, je ne parvient pas à accélérer le processus, ni à réduire la taille maximum des scintillements.

EN: This corresponds to the desired effect.
However, I fail to speed up the process, or to reduce the maximum size of the flicker.

@smith2 no problemo..
Open the BlancC - Start IridiscenceMod01.fsh in notepad.
The code to alter for speed should be on line 11

#define iTime u_Elapsed*0.314159 //*0.1666

increase this to say..

#define iTime u_Elapsed*2.0

save the file as same name
run the scene and mod as required again to adjust speed up or down
~~~
Not sure about the flicker size... @WA may know.

@EverthangForever

In the FGA467 scene the girl in the centre is reversed left/right. The lettering on the waistcoat is reversed, as are the tattoos.

I haven't seen for the other girls in the scene, if the problem is present, although for the girls behind the glass the iStripper acronyms seem to be right on the buckets.


@EverthangForever

Dans la scène FGA467 la fille au centre est inversés gauche/droite. Le lettrage sur le gilet est inversé, ainsi que les tatouages.

Je n'ai pas vu pour les autres filles de la scène, si le problème est présent, bien que pour les filles arrière de vitre les sigles iStripper semblent du bon côté sur les seaux.

@ComteDracula - In the FGA467 scene the girl in the centre is reversed left/right.

Thank you very much. I believe the swing model is also reversed.
I will wait a little longer and tell you when it has been corrected
~~
Merci beaucoup. Je crois que le modèle de balançoire est également inversé.
J'attendrai encore un peu et je vous dirai quand cela aura été corrigé

@ComteDracula le serveur a maintenant été mis à jour avec la bonne gauche/droite sur
Modèles centraux et swing. Merci 👌
~~
@ComteDracula the server has now been updated with the correct left/right on
center and swing models

Update: (2) Smith2 - Indiana Jones
Honk Kong 2.0

(Thanks to @EverthangForever with the FG485 shader)

Update: (2) Smith2 - Valentine
(new plateform)

Thank you @EverthangForever and @smith2 for your excellent work. It is much appreciated.

Merci @EverthangForever et @smith2 pour votre excellent travail. C'est très apprécié.

Thank yous all around 😊

https://www.istripper.com/forum/thread/29408/85?post=794213

Tutto su iStripper / Share your FullScreen - Member Created Scenes here

Back to the scene foundary lol. FGA468-FGA475 Eight selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly ap...

Thank you so much @EverthangForever. All the scenes work well for me.😊


Merci beaucoup @EverthangForever. Toutes les scènes fonctionnent bien pour moi. 😊

@ComteDracula Bon à savoir. Merci beaucoup 😊
~~
@ComteDracula Good to know. Thanks a lot

Just uploaded my first 8K SBS scenes. Here's what you get..... :

There's 25 randomish backgrounds in 8K.

The backgrounds are read by a shader that splits the left and right eye sides of the background and sends each side to a separate framebuffer.

All of the rest of the scene on the LHS or RHS uses the exact same code but on each side the camera is offset so that you see it from a slightly different perspective and create the depth effect.

The two framebuffers are then merged into the final output.

The 25 random backgrounds appear in a random order randomly each time you run the scene and change every 30 seconds.

In the bottom left there's a timer so you can see how long you have been stuck in VR. :)

It's early days for what I'm building here, so keep those comments coming.

Thank you @Calgon for these beautiful scenes.

Although I have a VR headset, which I haven't yet tested on my new PC, I tried these on my screen in 3D, 1080p. It works very well for the depth effect with my 3D glasses.

Everything is fluid and the background images are very nice.

I was wondering if the timer could be deactivated as a display? For me it's not very useful.

Thanks you.


Merci @Calgon pour ces très belles scènes.

Malgré que j'ai un casque VR, que je n'ai pas encore testé sur mon nouveau PC. j'ai essayé celles-ci sur mon écran en 3D, 1080p. Cela fonctionne très bien pour l'effet de profondeur avec mes lunettes 3D.

Tout est fluide et les images d'arrière plan sont très belles.

Je me demandait si le minuteur peut-être désactivé en tant qu'affichage ? Pour moi c'est peu utile.

Merci.

@ComteDracula

Glad they worked for you. They will be even crispier in 8k.

I was wondering if the timer could be deactivated as a display? For me it's not very useful.

Remove the two sections of code like this:

sprite{
source: Writer, 0
source: Font, 1
size: 1920, 2160
// size: 960, 1080
pos: 10, -330, 1310
rot: 0, 0 , 0
scale: 0.55, -0.55
uniform: cycle_time, float, 40
uniform: alpha_on, float, 0.
uniform: alpha_off, 40
uniform: chapter, float, 3.
uniform: max_chapters, float, 3.
}

One is at line 698 the other at 1230

@Calgon

Thanks it worked by removing the two sections of code.

Unfortunately I'm not equipped to see 8K.


@Calgon

Merci cela a fonctionné en enlevant les deux sections de code.

Malheureusement je ne suis pas équipé pour voir du 8K.

@ComteDracula

Unfortunately I'm not equipped to see 8K.

You said you had a VR headset - Have a look at the work @WA has done on Virtual Monitors - you may find you are fully equiped after all.

@Calgon this is great work. Unfortunately my current rig isn't yet
up to it without uber jerkiness , let alone adding a Meta Quest 3s 😪