Well from what I understand the limited number of complete shows are going for about $1,000+ each

The Complete Shows are called Limited.
These are the equivalent to a regular iStripper Show.
These are the Lowest Level of the Rarity Levels

These bulk of these have been won at auction in the $4.50 to $6.00 range
the 1st 240 bidders have on Average gotten a card for under $6.50
SN's 295 and lower....down to SN 50

The Top 50 Lower SN's have gone for Higher prices. up to $10.
The Top 280 SN's all for Under $10
with the Top 3 Lowest SN's going for $15 to $25

There are Three higher Value Rarity Levels, and Each Higher Level Add One extra Clip per level
These are Bonus Clips that you would Not get in a regular Card.
The Top 3 Rarity Levels is where the Prices Go Up...

the Levels are
Limited - A full card just like standard iStripper card about 290 of these cards available
Rare ( 1 extra Rare clip ) about 80 cards available
Epic ( includes the Rare clip plus one Extra Epic Clip ) about 20 cards available
Legendary ( Includes Both the Rare and Epic clips, plus one Extra Legendary Clip ) 3 to 4 cards available

Please correct me if I am wrong.

Well from what I understand the limited number of complete shows are going for about $1,000+ each and while the incomplete shows are going for far less I'm pretty sure they are still much more ... so no, I would not say you are wrong.

It was never really about the money or cost difference for me but I think spent $1,000 on porn my accountant would have me locked up. Might do it anyways if I thought I could sell it for $3K but I would think anyone desperate enough to pay $3K would just bid it up at auction.

On that note; does anyone know what Totem's cut on the secondry market is? I think I saw it but couldn't find again. Does the cut come out the the sale or is it anadditional fee? I'm exploring the idea of helping an artist friend mint some NFTs and trying to get a better grasp on the market.

2) I would put a + and - onto the below panel while the show is playing (plenty space there from left to the download and volume buttons) - it can be set +/- 5 % with each push or +/- 10 %

It is not at all clear what you are asking for here. What is the +/- 5 % adjustment supposed to applied to ?

4) missing the usual settings button right next from the on/off top right button - it was a good quick function to get straight into the settings with one click, but I forgive you if you introduce the point 2)

From that I assume that 2) above may have been intended to be a request for an extra set of volume controls.

In general I think the intention with this and most other app's is that configuration settings should be regarded as being only infrequently modified so the need to use two mouse clicks rather than one is, for me, no problem. When I want to adjust the current volume I use the Windows Sound Mixer (right click on the loudspeaker icon in the Systray area) rather than change the app's settings.

Some thoughts:
when I go inside a bought card - missing the red X from the top right corner to exit the card back to the collections
2) I would put a + and - onto the below panel while the show is playing (plenty space there from left to the download and volume buttons) - it can be set +/- 5 % with each push or +/- 10 %
3) missing the right "now playing" panel when I am in the settings (and show is playing)
4) missing the usual settings button right next from the on/off top right button - it was a good quick function to get straight into the settings with one click, but I forgive you if you introduce the point 2)
thx for listening

Question : est-ce que la version 64 bits consomme moins de RAM que la version 32 bits.
Je suis sous la version 32 bits actuellement et ça devient hallucinant comment le logiciel consomme de plus en plus de mémoire vive 😲

@Celine ... I don't think that some of these comments are quite right

Trading cards in auctions on Dolz are between $3 and $6.

People have "won" cards in auctions for bids ranging from 357 Dolz to 81001 Dolz. That's from about $4.50 upwards.

You can resell them on the secondary market for ~ 3 times their price.

As NFT's the owner can sell them in the secondary market if they wish. Sale prices can fluctuate - you may lose.... but you may gain. There is no guarantee of being able to sell them for ~3 time what you paid.

I want it to play a play a striptease, beginning with one clip of the lowest "eroticism level", then proceding through one clip of each level and ending with the highest, usually x-rated, clip.
I absolutely agree, and have ***** about that myself on several occasions - but it's not what you wrote in your original post. Have you tried with Progressive Hotness being UNCHECKED.

At one time the program appeared to me to handle this aspect rather better but for a few release it seemed to switch between the "good" and "bad" orders with each new version before settling down to the current "bad" order.

Hey Emu! Yes, I‘ve tried leaving progressive hotness unchecked as well. The app then just choses random clips from any level to fill the pre set time.

Trading cards in auctions on Dolz are between $3 and $6.

You can resell them on the secondary market for ~ 3 times their price.

And at the moment, there is a 500 DOLZ cashback offer for your first winning trading card auction.

Current auction : https://dolz.io/auction/0x556BD2c615B642fc4b05405ba64C3f273EFa66F9

500 DOLZ cashback offer : https://www.istripper.com/forum/thread/53278/1#post767298

Complete guide to start bidding : https://dolz.gitbook.io/dolz/how-to-for-beginners/buy-dolz-on-polygon

😋

Is everything alright to this new version in My Collection, with the bought and removed cards?
Do they still appear in My Collection? 😐

If I understand well, these NFT-cards which you have to pay with Dolz tokens are far more expensive than the regular cards.
And when I'm right, I won't buy any Dolz-tokens.
At the moment, I don't have any
Please correct me if I am wrong.

I want it to play a play a striptease, beginning with one clip of the lowest "eroticism level", then proceding through one clip of each level and ending with the highest, usually x-rated, clip.

I absolutely agree, and have ***** about that myself on several occasions - but it's not what you wrote in your original post. Have you tried with Progressive Hotness being UNCHECKED.

At one time the program appeared to me to handle this aspect rather better but for a few release it seemed to switch between the "good" and "bad" orders with each new version before settling down to the current "bad" order.

At the very least Totem should be able to play the clips in something like the following order

All of the Pole clips
All of the Cage clips
All of the Swing clips
All of the Edge Of Screen clips
All of the Glass clips
All of the Standing clips
All of the Table clips

while, in each case, using Progressive Hotness to order the clips within each clip type - and they can probably do something better than that.

This should preferably be accompanied by that other oft requested feature, the ability to enable/disable the individual clip types (Recently Celine has stated that this is on the To Do list, which is long awaited acknowledgement of the request).

I have or had a problem with this new update, as soon as i click on the trading cards tab (mind you i don't have any of them) my anti virus shut IStripper down and flagged it as ransomware for "encrypting and modifying"g0013-1-4-0.png.juXFeBg0015-1-4-0.png.DFwXLdg0024-1-4-0.png.eVyTWRI've never had anything like this happen before, and in the past i didn't need to whitelist vghd.exe so im gonna assume this was a false flag.Noted thanks, we'll look into that! May I ask you what your AV is?

Sorry for the late reply, Im currently using Trend Micro Maximum Security

Problem solved !

Thanks for the rapid resolution - all updated and working fine

Vanessa Alessia's trading card "Wine And Dine" auctions are online now!

Make sure you visit https://dolz.io/auction/0x556BD2c615B642fc4b05405ba64C3f273EFa66F9 to check out and participate !

Remember that those of you who win their first trading card with Vanessa Alessia will receive 500 DOLZ !!!

Read it all here :
https://www.istripper.com/forum/thread/53278/1#post767298

And if you need some help to step in the Dolz Auctions, no problem, here is a detailed process :
US version : https://dolz.gitbook.io/dolz/how-to-for-beginners/buy-dolz-on-polygon
FR version : https://dolz.gitbook.io/dolz/guide-pour-debutants/acheter-des-dolz-sur-polygon

Good luck with the auctions !

Bonus videos got not playable by me (again!), message being saying error [1], on the newest version. I am on Windows 10 64bit

Thank you for reporting that. I've managed to reproduce the bug and identified a problem in our packaging for the 64-bit version regarding the bonus video. We'll look at it ASAP.
The videos should be working fine with the 32-bit version, although I can appreciate it would be quite a hassle to keep switching version just to watch a video...

I cannot play the video bonus in the software with the new 1.2.520 64bit version.

I never had this issue with the 32bit versions. I'm using Windows 11 64bit.

The forum is displayed in english instead of french with 1.2.520 64bit and my personal dark skin is not applied to the UI of the forum.

Bonjour à tous,Je viens de tester cette nouvelle version de Istripper et comme les nouvelles versions précédentes, nous avons, dès que nous allumons notre ordinateur, une fenêtre en plein écran de Istripper. Ce n'était pas le cas avec la version 1.2.378.Comprenez que nous avons le droit à un peu intimité !!!Et que si nous allumons notre ordinateur devant nos enfants ou des amis avec l'affichage d'une fenêtre Istripper, nous allons passé pourquoi ?Comprenez que je passerai aux nouvelles versions quand ce problème sera résolu, sinon, je serais obliger de le retirer des paramètres de démarrage.J'ose espérer qu'il s'agisse d'un bug et qu'il sera rapidement corrigé.Dans l'attente de vous lirePar avance, je vous remercieHello everyone,I have just tested this new version of Istripper and like the previous new versions, as soon as we turn on our computer, we have a full screen window of Istripper. This was not the case with version 1.2.378.Understand that we have the right to a little privacy!!!And that if we turn on our computer in front of our children or friends with the display of an Istripper window, we go past why?Understand that I will upgrade to newer versions when this issue is resolved, otherwise I would have to remove it from the startup settings.I dare to hope that it is a bug and that it will be quickly corrected.Looking forward to reading from youI thank you in advance

Please rest assured, this has been identified and fixed. The problem occurs when installing the 1.2.520 over the existing 1.2.378. The current workaround is to uninstall iStripper and re-install the 1.2.520 directly, but the bug has been corrected on our end, and from version 1.2.522 onwards, the switch from version 1.2.378 to 1.2.522 will not cause this problem to occur again.

@risenshine23

I don't seem to have that problem. I'm using a 2020 iMac running OS 13.4.1

Bonus videos got not playable by me (again!), message being saying error [1], on the newest version. I am on Windows 10 64bit

@charliefoxtrottI recommend @Dorsai6 's access app: https://www.istripper.com/forum/thread/44539/1?post=659323I just updated to 1.2.520 (64-bit) and this application still works like a charm, as before the update.

Hey thanks! This could just be the solution for my problem: I could generate a playlist with @Dorsai6 's Playlist generator and then play the .vpl file with Starryks playlist manager. That should theoretically work, as the Playlist manager still can read .vpl files. I had set it to "entire collection", which doesn't work beacuse of the new structure of the models.lst file.

even progressive hotness does cut off after the time has been filled with no-nudity or topless clips.Not if you set the show duration sliders (there are separate ones for the Desktop and Full Screen Scene modes) all the way to the right or if you use the Play All Clips option when playing a single card. If you want to see all of a show don't leave iStripper configured to stop after a couple of minutes.

Yes, but then iStripper would fill the preset time with several clips of the same level. This especially happens with the older Deskbabes cards, where there are cards that have a lot of very short, someteimes only 30 seconds clips.
I want it to play a play a striptease, beginning with one clip of the lowest "eroticism level", then proceding through one clip of each level and ending with the highest, usually x-rated, clip. As it is now, vanilla sometimes does exactly that, especially with the newer cards and with the right duration, but with older cards you either only get one eroticism level (long individual clips) or several of the same level (short individual clips).

Just updated from 1.2.378 to 1.2.520 (32 bit) all good so far!😀

🙃🙃🙃

Version 1.2.520 is an official release !
sorry for the word "Beta" in the subject line ! Corrected !

Version 1.2.378 will not be modified anymore, I mean there will not be a version 1.2.380, let's all jump onto 1.2.520 🤗

Interesting and good that we eventually have a 64bits version, I will surely switch to it when it will be not an "official beta" anymore but an "official version". Thank you!

mmh very lovely

Anyone else running into the issue where you download the update, it closes iStripper and reopens but it's still 1.2.378 when it reopens? I don't know if it's something at my end or I haven't ticked something in the setting windows to use beta versionsThx ! we're working on it !

Problem solved !

I've the same problem as ethan 45407

We're looking into it, we've just identified the problem, this should be fixed within an hour. We'll let you know! :)

I've the same problem as ethan 45407

Anyone else running into the issue where you download the update, it closes iStripper and reopens but it's still 1.2.378 when it reopens? I don't know if it's something at my end or I haven't ticked something in the setting windows to use beta versions

Thx ! we're working on it !

I noticed three problems with the English text of the licencing terms that are now displayed by the installer1. There was a section labelled GRPD which should be GPRD2. In that section I saw several unknown character glyphs (question marks in a black diamond) displayed where there should be apostrophes. I suspect that acute accents may have been used instead of apostophes.3. Right at the end there was another unknown character glyph - this time I think it was supposed to be a copyright sign.

Gonna look into these, thanks!

I'm running into an issue with the newest update on OS X. The problem is with the "hit box" of the show, where in past versions I was able to click directly on the model to increase the size, now the area to click takes up the entire lower right quarter of my screen, even when not clicking on the model at all.

Hi, that's a known bug on MacOS that has taken us a long time to look into and we still couldn't find a fix for it. The recommended way on MacOS is to use the GPU mode from now on, which should incidentally be smoother as well than CPU mode. Please let me know whether you encounter any problems with GPU mode.

I have or had a problem with this new update, as soon as i click on the trading cards tab (mind you i don't have any of them) my anti virus shut IStripper down and flagged it as ransomware for "encrypting and modifying"g0013-1-4-0.png.juXFeBg0015-1-4-0.png.DFwXLdg0024-1-4-0.png.eVyTWRI've never had anything like this happen before, and in the past i didn't need to whitelist vghd.exe so im gonna assume this was a false flag.

Noted thanks, we'll look into that! May I ask you what your AV is?

I have experienced an issue, where downloaded and active preview clips are not being stored in the UI. Once it is shut off then reinitialized, the previews disappear. They are still stored on the system, they have to be reselected everytime the program restarts.

That's a known bug indeed, previews randomly disappear when restarting (not systematic but happens often enough)

Happy that there is now 64-bit version available! Maybe I'm imagining things but when I tested with a Full Screen scene with five standing/pole clips running simultaneously with camera zooming in and out and moving around the performers ("xu_-Fantasy House 5" -scene), it seems to run smoother than it did before 👍Most often I run only one performer at a time, so maybe in my typical use it doesn't really matter if it is 32bit or 64bit(?)

You're not imagining things, that's one the benefits of the 64-bit version :)

@Franckyt13
Hi,
Very sorry about this inconvenience you encountered. By default, iStripper should run in silent mode and you shouldn't see any splashscreen or main window when running it from startup, only the icon in the system tray (tested it just now on my end to confirm, however Celine did encounter the same problem as you did).
As for how to change iStripper running at startup, there's a much easier option than going into your registry, you can simply untick the box in the settings (see attached screenshot), and this will have the same effect.
Once again, apologies for this unfortunate experience.

Anyone else running into the issue where you download the update, it closes iStripper and reopens but it's still 1.2.378 when it reopens? I don't know if it's something at my end or I haven't ticked something in the setting windows to use beta versions

even progressive hotness does cut off after the time has been filled with no-nudity or topless clips.

Not if you set the show duration sliders (there are separate ones for the Desktop and Full Screen Scene modes) all the way to the right or if you use the Play All Clips option when playing a single card. If you want to see all of a show don't leave iStripper configured to stop after a couple of minutes.

I'm running into an issue with the newest update on OS X. The problem is with the "hit box" of the show, where in past versions I was able to click directly on the model to increase the size, now the area to click takes up the entire lower right quarter of my screen, even when not clicking on the model at all.

I have or had a problem with this new update, as soon as i click on the trading cards tab (mind you i don't have any of them) my anti virus shut IStripper down and flagged it as ransomware for "encrypting and modifying"

g0013-1-4-0.png.juXFeB
g0015-1-4-0.png.DFwXLd
g0024-1-4-0.png.eVyTWR

I've never had anything like this happen before, and in the past i didn't need to whitelist vghd.exe so im gonna assume this was a false flag.

As of the last beta, my Playlist Generator had a flaw. It was hard coded for only one version of the models.lst file. I posted a patch that fixes the problem in the Bugs and Fixes section, but I haven't uploaded a corrected version. With the new beta I need to test to see if there are any other problems before I upload a new version.

I have experienced an issue, where downloaded and active preview clips are not being stored in the UI. Once it is shut off then reinitialized, the previews disappear. They are still stored on the system, they have to be reselected everytime the program restarts.

It's significantly better. I have scenes that would crash 32 bit iStripper that now run 😄

@charliefoxtrott

I recommend @Dorsai6 's access app:
https://www.istripper.com/forum/thread/44539/1?post=659323

I just updated to 1.2.520 (64-bit) and this application still works like a charm, as before the update.

Thanks Wyldanimal, that's some helpful info. I just hope that Starryk will update his playlist manager, but I somehow doubt it, because he hasn't been active for quite some time.

I just find it frustrating that Totem, through all these updates, hasn't been able to actually improve the player functionality of the app. I just wonder that one user, that doesn't even have the source code, has been able to implement so many missing features. That shows that it should theoretically be possible to improve the player. But somehow this doesn't seem to be in the focus of Totem's development. Maybe the much hyped "iStripper 2.0" will have it? That's my hope.

Meanwhile I find the vanilla playmode of the app just frustrating ... no real striptease, the predefined time just gets dumped with random clips, even progressive hotness does cut off after the time has been filled with no-nudity or topless clips.

Happy that there is now 64-bit version available!

Maybe I'm imagining things but when I tested with a Full Screen scene with five standing/pole clips running simultaneously with camera zooming in and out and moving around the performers ("xu_-Fantasy House 5" -scene), it seems to run smoother than it did before 👍

Most often I run only one performer at a time, so maybe in my typical use it doesn't really matter if it is 32bit or 64bit(?)

GDPR, actually..

Thanks for the correction. I had to rely on my memory as I was not going to rerun the installer to check it.

In my work I have to deal with GDPR almost daily, and it has become a real nuisance... important thing, of course, but creating lots of complications. We have had to set up a new level of secure folders, create user groups who can and who can not access certain files, databases and indexes. Especially during holiday season having to make sure that there are always enough people of required clarifications at hand etc... I'm on my summer vacation right now, and this brings back too many things I want to forget for now, so I'll stop here 😀

By the way, you don't have to rerun the installer to check the license. Assuming you finished the installation, you can access the same text in Settings-tab of the software (near the end in "ABOUT"-section and the button "Show license")

@Franckyt13 all prior versions of the app, Normally Opened the UI during start up.However, The Shortcut could be Modified to add a command line switch to prevent the opening of the UItwo switches can be used.the first one is -fromStartup that is a dash lowercase 'f' and an UPPER case 'S'To use this command line switch , you must also have in Advance settings the Run iStripper at Startup Checked.If that setting is NOT checked, the the App simply closes and never starts.The send one is-fromSilent Dash lowercase 'f' and an UPPER case 'S'This one does not need any setting to be checked.So check your shortcut and if one of these command line switches are not already there.then edit your shortcut and add the SwitchI have a couple ShortcutsE:\IS\bin\vghd.exe -fromSilentC:\Users\wylda\AppData\Local\vghd\bin\vghd.exe -fromSilentC:\Users\wylda\AppData\Local\vghd\bin\vghd.exe -fromStartup

@Wyldanimal
Thank you so much, Your shortcut works fine.
I tested on a stop and a start and a re-start, I no longer have an Istripper window that opens when Windows opens.
Thanks again for your reply

Sent a reply on the iStripper Discord Server.

If / when there is an Update / Change to the iStripper app.
any 3rd party apps, will have to Adapt to the changes in iStripper.

Over the Years, iStripper has made some accommodations to continue to allow
bi-Directional communication between the iStripper app and the 3rd party apps, Via the Registry and certain files in the data folder.

This has been very accommodating on the part of iStripper.

It is then up to the 3rd party app developer, to Maintain their app and adjust to the changes.

While iStripper does not document these changes, ***** things are easy to discover
and then the 3rd party app developer can tweak their app for the changes.

We, the 3rd party app developers are Not reverse Enginering the vghd.exe file.
we examine the structure of the Models.lst file, the Names.xml file, and the individual XML files in the data folders.
Some read and inventory the files in the Models Folders to get the list of clips.
We also exchange data through the Registry Keys that iStripper has Maintained that we can use.

If not for these files and registry Keys, 3rd Party apps would NOT exist.

It should also be noted that:
No Modification of the iStripper app is being done, and No Modification of the Files in the data folder is being done.

GDPR, actually..

Thanks for the correction. I had to rely on my memory as I was not going to rerun the installer to check it.

Yes,

If you have both a Windows PC and a MAC
you would Install using the same iStripper Username and Password
you can share a common Networked Path with the same shared set of Models Folders.
But Each System should have it's own Local set of Data Folders.

1. There was a section labelled GRPD which should be GPRD

GDPR, actually... 😉 (it is written correctly on the first row in that section)