For everyone who does not already know:

In the forum and in messages, actual photos, screenshots, pictures are not possible by members.

However, users are often putting up the links to cards.

If you want to do this, use this:

[linkset][/linkset]

But you must put in a letter (in recent cards that will be e or f) followed by four digits.
The four digits are the card number, which may have prefixed 0's.

Here are some examples:
'a' card (Dandelion, 1292)
'c' card (Aika May, 611)
'e' card (Toree, 1980)
'f'card (Alysa, 13)

[linkset]a1292[/linkset] [linkset]c0611[/linkset] [linkset]e1980[/linkset] [linkset]f0013[/linkset]

I put the linkset in 'code' so that you can see the text.
The linkset will always be one letter followed by four digits (numerals). There are no blank spaces.

One way of determining the card set (letter prefix) is this:
The 'a' and 'e' card sets are non-explicit; the 'c' and 'f' card sets are explicit and have the xxx on the card pic.
The 'a' and 'c' card sets ended and were replaced by 'e' and 'f' card sets, both in 2014.
The following are all the same card number but with a different letter prefixed.


note: the 'd' cards do not use the linkset, except for Sunny Leone. She is the only 'd' card model visible on the website.

note: the removed cards (Priscilia Jones, Dianna, Karolina, etc.) will not work since they are no longer available for purchase.
note: the linkset refers to a photo card used to link to the card page via the store.

Is this thread (topic) worth pinning to this forum category?

It would be nice if the trading cards (the 'g' collection) worked with the linkset.

I've pinned this thread, as you suggest it @JonC001

thanks @stefnev1

It would be nice if the trading cards (the 'g' collection) worked with the linkset.

It would be really nice if NFTs could be linked as well

@JonC001 wrote:

It would be nice if the trading cards (the 'g' collection) worked with the linkset.

@Calgon Wrote:

It would be really nice if NFTs could be linked as well

• the "g" collection and the NFT's are one in the same.

[linkset] doesn't work with them because [linkset] only works for cards available in the store.

I'm out, never dot that stuff anny wat. ;P

Linkset must be used exactly as I had earlier described.
Using model's name will not work.
Using card name will not work.
Linkset is always in brackets [].
The beginning of linkset is this: [linkset].
The end of linkset is this: [/linkset].
The card id (letter followed by numerals) is between these.
Do not use blank spaces.