Bonjour à tous,Je viens de tester cette nouvelle version de Istripper et comme les nouvelles versions précédentes, nous avons, dès que nous allumons notre ordinateur, une fenêtre en plein écran de Istripper. Ce n'était pas le cas avec la version 1.2.378.Comprenez que nous avons le droit à un peu intimité !!!Et que si nous allumons notre ordinateur devant nos enfants ou des amis avec l'affichage d'une fenêtre Istripper, nous allons passé pourquoi ?Comprenez que je passerai aux nouvelles versions quand ce problème sera résolu, sinon, je serais obliger de le retirer des paramètres de démarrage.J'ose espérer qu'il s'agisse d'un bug et qu'il sera rapidement corrigé.Dans l'attente de vous lirePar avance, je vous remercieHello everyone,I have just tested this new version of Istripper and like the previous new versions, as soon as we turn on our computer, we have a full screen window of Istripper. This was not the case with version 1.2.378.Understand that we have the right to a little privacy!!!And that if we turn on our computer in front of our children or friends with the display of an Istripper window, we go past why?Understand that I will upgrade to newer versions when this issue is resolved, otherwise I would have to remove it from the startup settings.I dare to hope that it is a bug and that it will be quickly corrected.Looking forward to reading from youI thank you in advance

Please rest assured, this has been identified and fixed. The problem occurs when installing the 1.2.520 over the existing 1.2.378. The current workaround is to uninstall iStripper and re-install the 1.2.520 directly, but the bug has been corrected on our end, and from version 1.2.522 onwards, the switch from version 1.2.378 to 1.2.522 will not cause this problem to occur again.

I cannot play the video bonus in the software with the new 1.2.520 64bit version.

I never had this issue with the 32bit versions. I'm using Windows 11 64bit.

The forum is displayed in english instead of french with 1.2.520 64bit and my personal dark skin is not applied to the UI of the forum.

Bonus videos got not playable by me (again!), message being saying error [1], on the newest version. I am on Windows 10 64bit

Thank you for reporting that. I've managed to reproduce the bug and identified a problem in our packaging for the 64-bit version regarding the bonus video. We'll look at it ASAP.
The videos should be working fine with the 32-bit version, although I can appreciate it would be quite a hassle to keep switching version just to watch a video...

Problem solved !

Thanks for the rapid resolution - all updated and working fine

I have or had a problem with this new update, as soon as i click on the trading cards tab (mind you i don't have any of them) my anti virus shut IStripper down and flagged it as ransomware for "encrypting and modifying"g0013-1-4-0.png.juXFeBg0015-1-4-0.png.DFwXLdg0024-1-4-0.png.eVyTWRI've never had anything like this happen before, and in the past i didn't need to whitelist vghd.exe so im gonna assume this was a false flag.Noted thanks, we'll look into that! May I ask you what your AV is?

Sorry for the late reply, Im currently using Trend Micro Maximum Security

Is everything alright to this new version in My Collection, with the bought and removed cards?
Do they still appear in My Collection? 😐

Question : est-ce que la version 64 bits consomme moins de RAM que la version 32 bits.
Je suis sous la version 32 bits actuellement et ça devient hallucinant comment le logiciel consomme de plus en plus de mémoire vive 😲

Some thoughts:
when I go inside a bought card - missing the red X from the top right corner to exit the card back to the collections
2) I would put a + and - onto the below panel while the show is playing (plenty space there from left to the download and volume buttons) - it can be set +/- 5 % with each push or +/- 10 %
3) missing the right "now playing" panel when I am in the settings (and show is playing)
4) missing the usual settings button right next from the on/off top right button - it was a good quick function to get straight into the settings with one click, but I forgive you if you introduce the point 2)
thx for listening

2) I would put a + and - onto the below panel while the show is playing (plenty space there from left to the download and volume buttons) - it can be set +/- 5 % with each push or +/- 10 %

It is not at all clear what you are asking for here. What is the +/- 5 % adjustment supposed to applied to ?

4) missing the usual settings button right next from the on/off top right button - it was a good quick function to get straight into the settings with one click, but I forgive you if you introduce the point 2)

From that I assume that 2) above may have been intended to be a request for an extra set of volume controls.

In general I think the intention with this and most other app's is that configuration settings should be regarded as being only infrequently modified so the need to use two mouse clicks rather than one is, for me, no problem. When I want to adjust the current volume I use the Windows Sound Mixer (right click on the loudspeaker icon in the Systray area) rather than change the app's settings.

Thank you for reporting that. I've managed to reproduce the bug and identified a problem in our packaging for the 64-bit version regarding the bonus video. We'll look at it ASAP.

Thank you very much for fast answering and addressing the issue, @guillaume !

Hello
after (unasked again) automatically installing the 520(32bit) after app start, i then installed the 64bit Version manually.
And now it always rebuild my collection when i start iStripper.

Hello - I'm running a Mac using OS 12.6. I recently installed this beta and have the following issues:

• the app opens up without requiring the password (I have that option ticked 'on')
• the preview push is not working (set to every 10 minutes)
• it also takes a LOT longer to boot up

I have restarted the app and my computer a few times to see if anything changes. I'm not a fan so far of the new beta - I'm not seeing much that is new other than the new look and these issues. I do understand that betas are not finished products.
How can I get back to a previous version?

it also takes a LOT longer to boot up

How long ?

Mine takes about the same time as before, but it feels longer because the earlier versions let you do things before it was 100% safe to do so and this would sometimes lead to problems that could only be fixed by using task manager to ***** it. The new version prevents that in a very obvious way.

So I did the new update way said but it well not let log back in. now what?.

Can someone tell what pseudo means please?.

Can someone tell what pseudo means please?.

Substitute or Alternative

When you join you get a Generated name
Like i12098765

Then you have to choose your Alternative or Pseudo
Name.

Done, thank you 😍👍

The "My Music" section is stil ***** me. In the older versions, I could incativate the MP3 files I uploaded to the software and keep active the MP3 files I still wanted to have play. I thought the checkboxes were a way to activate and inactivate, but hey don't stay checked. Maybe I'm just not used to the overhaul with this section. Please advise.

Reopening from the Toolbar puts the UI in some wierd auto-stretch view with the bottom and right panels occupying about 40% of the screen .

Specs:
1.2.520
WIn 10
4K monitor


Steps to reproduce:
1) Maximize the App window.
2) Close app to Tool bar (right bottom)
3) Right Click ,Open from toolbar
4) 😕Make this face

This version and the previous one still randomly downloads a preview sometimes (after login seems like) and is off and on about appying my skin. Appologies if someone already mentioned this. Otherwise, so far so good. 👍 😎

Version 1.2.520 64bit
In addition to my previous post, the personal skin doesn't apply to My Profile tab too but the text is in french (the forum remains in english after log out and log in, quit the app and relaunch the PC, with the default white color).

Version 1.2.520 64bit

Yeah, I think the skin usually won't apply to My Profile tab and Forum tab. For me at least, it might when you start the app but then stops using the skin for those tabs and uses some version of basic. I get a sort of greyish white background instead or basics white background. 😕

(Edit)

Ok, on my screen the basic skin is a more pleasent greyish white instead of the harsh bright white I remember.

@TheEmu: it takes about 10 seconds now. But I hadn't thought about what you mention. Good point.

Anyone know if there is a way to return to a previous version?

In future I think Totem should not have system alerts to download beta versions. I got a pop up from the app telling me about a new version. I should have read carefully but I assumed it was not a beta because I got the system alert. IMO those alerts should not be for beta versions.

The announcements on the forums should be enough for people who are interested in testing.

I should have read carefully but I assumed it was not a beta because I got the system alert.

As it happens your assumption was correct - @Celine has already appologised for calling it a beta.

https://www.istripper.com/forum/thread/53277/1?post=767356

Everything about iStripper / NEW VERSION 1.2.520 (Pc) / 521 (Mac) and followings (currently 530/531)

🙃🙃🙃 Version 1.2.520 is an official release ! sorry for the word "Beta" in the subject line ! Corrected ! Version 1.2.378 will not be modified anymore, I mean there will not be a version 1.2.380, let's...

@TheEmu - no absolutely not volume control, of course sizing of the girl playing on screen in full. It is annoyingly difficult now that they taken away the one click setting button as well from the top right corner.

@cxsn asked:

How can I get back to a previous version?

Previous Release Version 1.2.378 / .379

WIN: https://www.istripper.com/binary/beta/1_2_378/setup-istripper.exe
MAC: https://www.istripper.com/binary/beta/1_2_378/setupmac-istripper.dmg

@TheEmu @Wyldanimal -- thank you very much!

I want to thank the UI/UX team , because now I don't click like crazy on the arrows of Previous Page "<" and Next Page ">" !
Finally, the buttons have a larger area to click on.

Dear Totem, dear VirtuaGirl Lovers,

I got trouble with 1.2.520 - I'm using Windows 10 64-Bit 22H2 June Update - blank install via MSDN ISO-Image - on each start of the system 1.2.520 crashed on start up - every time I have to start it manually.