@ComteDracula ahh oui, je me souviens qu'au début, de tels arrêts courts étaient signalés
lorsqu'une scène est exécutée avant que le chargement des images miniatures ne soit terminé.
Heureux de savoir que les séries de scènes A500-A507 se compilent toutes correctement. Merci
~~~
@ComteDracula ahh yes I remember in the early days such short stops used to be reported
when a scene is run before the thumbnail pictures have completed loading.
Glad to know the A500-A507 scene series all compile ok. Thanks

I must say, thank you all who have offered your art.

@willyweekly thanks for supporting iStripper & Totem's community. 👍
Without Totem there would be no fullscreen as we know it today.

@Calgon
I admit, I procrastinated a couple days...
I finally got around to Watching these video Clips in my Quest VR headset.

https://www.istripper.com/forum/thread/27449/168?post=796506

Everything about iStripper / Discussions for Scenes for Version 1.2.X Fullscreen Mode here

Some time ago I converted a few snippets of iStripper recordings over to 3D using Owl3D software. They're a bit rough and experimental but if anyone wants to see what "could" be achieved converting ex...

This is the NUT ! If we had Live iStripper 3D it would be Incredibly Amazing.
Go Watch the Video Clips in VR...

@Calgon Very Impressive works of art.

@WA

I finally got around to Watching these video Clips in my Quest VR headset.

They were fun to make. The bouncing space hoppers, I was really pleased with, in 2D they are of course just orange circles but the conversion software has interpreted them correctly as spheres .

The carousel has a floor made entirely of quads changing colour at random intervals. I stopped using it after upgrading to 4K but it will work fine on a good PC with 3K cards.

The giants scene was an experiment in perspective but I wanted to get a better background before release - and then forgot all about it.

..and although you've seen the porthole one before I think it has the best 3D effect on the model.

https://www.istripper.com/forum/thread/29408/85?post=796858

Everything about iStripper / Share your FullScreen - Member Created Scenes here

FGA508-FGA515 Eight selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unless...

Thank you @EverthangForever

Thank you for your beautiful scenes. They all work well for me.

I wanted to point out that I have observed this error.

ET-fractalgardenA512.scn

logo: Info/small_logoFractalgardenA511.png

Have a nice evening. 😊


Merci @EverthangForever

Merci pour vos très belles scènes. Elles fonctionnent toutes bien pour moi.

Je voulais vous préciser que j'ai observé cette erreur.

ET-fractalgardenA512.scn

logo: Info/small_logoFractalgardenA511.png

Bonne soirée à vous. 😊

@ComteDracula
C'est bon de le savoir. Merci beaucoup. L'erreur d'étiquette A511 a été corrigée sur A512 sur le serveur
~~~
Good to know this. Thanks so much. The logo A511 error has been changed to A512 on the server zip.

https://www.istripper.com/forum/thread/29408/85?post=797082

Everything about iStripper / Share your FullScreen - Member Created Scenes here

FGA516-FGA523 Eight selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unless...

Thanks @EverthangForever

All the scenes work well for me. 😊


Merci @EverthangForever

Toutes les scènes fonctionnent bien pour moi. 😊

Merci @ComteDracula. Bon à savoir 😉
~~~
Thanks @ComteDracula. Good to know

https://www.istripper.com/forum/thread/29408/85?post=797453

Everything about iStripper / Share your FullScreen - Member Created Scenes here

FGA524-FGA531 Eight selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unless...

Thanks @EverthangForever

All the scenes work well for me. They are very beautiful.

The last FGA531 is quite futuristic and original with its articulated mechanical arm. However, I was afraid that the girl would be knocked out or ***** by this arm. And even disintegrated by the lasers. 😆

Keep up the good work. 😊


Merci @EverthangForever

Toutes les scènes fonctionnent bien pour moi. Elles sont très belles.

La dernière FGA531 est assez futuriste et originale avec son bras mécanique articulé. Par contre j'avais peur que la fille se fasse assommer ou enlever par ce bras. Et même désintégrer par les lasers. 😆

Continuez votre bon travail. 😊

@ComteDracula oui, heureusement pour les filles, tous les extraterrestres qui pilotent ces vaisseaux spatiaux semblent avoir une tres mauvaise visée au laser. Merci beaucoup pour vos commentaires. 😉

@ComteDracula yes fortunately for the girls, any aliens manning these spacecraft appear to have very poor laser aim. Thanks so much for your feedback.

https://www.istripper.com/forum/thread/29408/85?post=797818

Everything about iStripper / Share your FullScreen - Member Created Scenes here

[FGA532-FGA539 Eight selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unles...

Those amazing authors at Shadertoy have some code which avoids 'objects' hitting the camera
in their screen view. Valuable for shader terrain zooms if you can find it. ✌

Thank you @EverthangForever. Everything is OK for me.

Small observation the ET - FractalGarden FGA532 logo is vertical rather than horizontal. I suppose this is a mistake? Personally, I prefer horizontal. Less disruptive to the view and easier to read.

I like the scenes FGA533, FGA534 and especially FGA536 (lots of detail), I imagine this is the scene you were talking about earlier regarding the camera?

These are particularly beautiful.

A huge thank. 😊


Merci @EverthangForever. Tout est OK pour moi.

Petite observation le logo ET - FractalGarden FGA532 est à la verticale plutôt qu'à l'horizontale. J'imagine que c'est une erreur ? Personnellement j'aime mieux à l'horizontale. Moins dérangeant pour la vue et plus facilement lisible.

J'aime bien les scènes FGA533, FGA534 et surtout la FGA536 (Beaucoup de détails), j'imagine que c'est de cette scène que vous parliez plus haut concernant la caméra ?

Celles-ci sont particulièrement belles.

Un énorme merci. 😊

@ComteDracula c'est intéressant. Je n'ai pas de logo iStripper vertical
Le fichier de scène FG A532 qui se trouvait dans le zip envoyé au serveur.
Il s'agit simplement de l'ancienne étape PPC comme d'habitude, avec le logo iStripper dans le cadre de celle-ci.

J'ai expérimenté une autre façon de traiter les shaders
récemment, avec l'aide de @WA cependant, cela n'aurait pas dû affecter votre fermeture éclair.

@ComteDracula that's interesting. I have no vertical iStripper logo in
FG A532 scene file which was in the zip sent to the server.
It is just the old PPC stage as usual, with the iStripper logo as part of it.

I have been experimenting with another way of processing shaders
recently with the help of @WA however this should not have affected your zip.

@EverthangForever, as I was saying, it's not the iStripper logo, but your black logo, on which it says “ET - FractalGarden FGA532”, which appears for a few seconds at bottom right, which is vertical, rather than horizontal.

I went to look in the info folder. And indeed the logo image is vertical.

I rotated it back to horizontal. It's now ok, when playing the scene.

Perhaps it was a mistake on my part when I checked the image names?


@EverthangForever, comme je le disais, ce n'est pas le logo iStripper, mais bien votre logo noir, sur lequel est écrit "ET - FractalGarden FGA532", qui apparaît quelques secondes en bas à droite, qui est à la verticale, plutôt qu'à l'horizontale.

Je suis allé voir dans le dossier info. Et en effet l'image du logo est à la verticale.

J'ai fait pivoter pour le remettre à l'horizontale. C'est maintenant ok, lors de la lecture de la scène.

C'est peut-être une ereur de ma part, lorsque j'ai vérifié le nom des images ?