@EverthangForever

Looks awesome so far but am sorry to interupt this discussion, looks important and promising. 👍 😎

Thanks @EverthangForever.

All the scenes work well for me.

Excellent work. 😊


Merci @EverthangForever.

Toutes les scènes fonctionnent bien pour moi.

Excellent Travail. 😊

Thanks @Socialhazard and @ComteDracula. A lot of experimental ideas
are happening with fullscreen at the moment,, so its good to stay tuned

Merci @Socialhazard et @ComteDracula. Beaucoup d'idées expérimentales
se produisent en plein écran en ce moment, donc bon de rester à l'écoute

@EverthangForever

A lot of experimental ideas
are happening with fullscreen at the moment

yup 👍

Well maybe a couple. I think "lots" might be pushing it.

@WA

@Calgon

try this
https://virtuastripper.net/Shaders/chess.fsh

I added some constants to control the speed and wobble of the board rotation.

From October 2022:

https://www.istripper.com/forum/thread/27449/134?post=750080

Everything about iStripper / Discussions for Scenes for Version 1.2.X Fullscreen Mode here

EDIT: updated the shader to add more comments to it redownload it. @Calgon try this https://virtuastripper.net/Shaders/chess.fsh I added some constants to control the speed and wobble of the board rot...

Several months later... I hadn't realised you'd made more comments on the chess.fsh shader here:

https://www.istripper.com/forum/thread/27410/7?post=750095

You are not allowed to see this topic or access data relative to this topic

I'll put this on my list of "stuff to finish".

yup 👍

sure, I meant mixing of shaders in da sprite nodexperiments..some examples here..

https://www.istripper.com/forum/thread/29408/78?post=758841

Everything about iStripper / Share your FullScreen - Member Created Scenes here

FG902-FG913 Twelve selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unless...

@EverthangForever

Thanks for these.

FG904 I just find disturbing. Who knows what AI driven creatures will be growing in labs soon 😳

FG908 I think you've forgotten to upload the shader.

@Calgon thanks a lot for the heads up... FG908 shader has now been included in the zip

I've been working for a long time now on a scene that will be different each time it is run dependent on a random shade of grey that iStripper selects at the start.
I can get a sprite to work with this:

sprite {
source: Surfaces1, 0
source: Water1, 1
source: Greys, 2

So... that's 2 textures for the shader and the third a random shade of grey that is converted to a random number.

I can get it work for a clip with this:

clipSprite {
source: sClipA, 0
source: Greys1, 1
source: Greys2, 2

Fantastic ! That meant I could have the clips do something at random times

But.... for the clipname I find that this doesn't work:

clipNameSprite {
source: sClipA, 0
source: Greys1, 1
source: Greys2, 2

Where the grey textures should be passed to the shader, it is instead picking some other texture into texture1. Anyone have any ideas why a clipNameSprite behaves differently and how I might fix it ?

I haven't tried it,
but can you create a framebuffer from just the clipNameSprite
then use the framebuffer as one of the inputs in a normal Sprite Node?

Share your code so we can experiment with it.

Thanks @EverthangForever.

Small logo error at the ET stage - FractalGarden903.scn

logo: Info/small_logoFractalgarden914.png

and the ET scene - FractalGarden906B.scn

logo: Info/small_logoFractalgarden906.png


Merci @EverthangForever.

Petite erreur de logo à la scène ET - FractalGarden903.scn

logo: Info/small_logoFractalgarden914.png

et la scène ET - FractalGarden906B.scn

logo: Info/small_logoFractalgarden906.png

@WA

Share your code so we can experiment with it.

I solved it with a simpler test, now I know it works I can hunt for the error in the proper scene.

For anyone interested here's a visual sample where the sprite, clipname and clipsprite all call the same shader but vary their output depending on which "choice" is specified as a uniform in the scene. By replacing one of the textures with a random shade of grey which then gets converted to a random number I can use this to create a random event but because the sprite, spritename and clip all access the same texture they can all respond to the same event in unison. (Hope that makes sense)

You can see the random grey in the bottom right section of the scene where each time you start the scene it will choose a different shade.

http://bit.ly/3SvZjyd

@ComteDracula

Thanks @EverthangForever.
Small logo error at the ET stage - FractalGarden903.scn
logo: Info/small_logoFractalgarden914.png
and the ET scene - FractalGarden906B.scn
logo: Info/small_logoFractalgarden906.png

Merci pour l'aide .. Tout est maintenant fixé dans le zip
Thanks for the help ..All is now fixed in the zip 😊

@Calgon & Wyldanimal interesting possibilities 👌

@Calgon

Because you are passing choice as a Float from the Scene to the Shader,
in your shader both sides of the == need to be Floats.

if (choice == 1){

should be

if (choice == 1.){

https://www.istripper.com/forum/thread/29408/78?post=759244

Everything about iStripper / Share your FullScreen - Member Created Scenes here

FG914-FG925 Twelve selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unless...

Kick ass awesome, keep it up. <(^_^)>

Thanks @Socialhazard - at my age keeping both ends up can be a challenge 😜
@Calgon FG914B uses a random texture directory as a render substrate
to vary the sampler2D shape size of @TheEmu 's Tunnel A.fsh in the shaders' mix.
NB: no shader conversions next week..updating some PC stuffs

@mcfett

Thanks for sharing these scenes.
The Jabbas Palace is great for playing show a1440 Armina - Princess of the Stars show

Thank you @mcfett for your scenes.

I notice that your girls in the 2 scenes are reversed left/right.

There is a code to add in your scenes so that they are on the right side.

scale: -1.0, 1.0, 1.0
in the Clipsprite section of the .scn file.

I also notice something that bothers me visually in your scene - Mcfett - JabbasPalace.scn

It looks like the girls are not full width, as if they are a bit squashed. I don't know what this is due to. It also seems to be the case with the girls' names and card titles, which appear when the girl is changed.

There would also be the possibility if you want (but not necessary) to add shadow on the ground, for more realism. If you are interested, people here in this thread can help you.

For the rest very beautiful work.


Merci @mcfett pour vos scènes.

Je remarque que vos filles dans les 2 scènes sont inversées gauche/droite.

Il y a un code a ajouter dans vos scènes pour qu'elles soient du bon côté.

scale: -1.0, 1.0, 1.0
dans la section Clipsprite du fichier .scn.

Je remarque aussi quelquechose qui me dérange visuellement dans votre scène - Mcfett - JabbasPalace.scn

On dirait que les filles ne sont pas en pleine largeur, comme si elles étaient un peu écrassées. Je ne sais pas à quoi cela est dû. Cela semble aussi le cas avec les nom des filles et titres des cartes, qui apparaissent lors du changement de fille.

Il y aurait aussi possibilité si vous le désirez (mais pas nécessaire) d'ajouter de l'ombre au sol, pour plus de réalisme. Si cela vous intéresse des gens ici dans ce fil de discussion peuvent vous aider.

Pour le reste très beau travail.

@mkst

Pretty cool. 👍 😎

@mkst Pretty cool. 👍 😎

Thanks! 😎

Hi @all

I'm trying to convert this shader by "gaz":
https://www.shadertoy.com/view/wtGfRy

I've been able to convert a few similar ones from gaz but some have a section of code like this:

for(float i=0.,g=0.,e,s;
++i<99.;
O.xyz+=5e-5*abs(cos(vec3(3,2,1)+log(s*9.)))/dot(p,p)/e
)
{
...other stuff
}

The existence of this line:

O.xyz+=5e-5*abs(cos(vec3(3,2,1)+log(s*9.)))/dot(p,p)/e

is the root of the problem and I am unable to convert any in this style

I'm used to "for loops" where each loop runs the code in the block {} but I "think" this is returning the value of O.xyz independant of the block..... that is to say, it's beyond me to convert it. Does anyone know if/how to convert this ?

I hope you did not see my first attempt to answer your post because it was wrong - as indeed, to a lesser degree was my second.

I think your problem is not understanding the full generality of for loops.

In the compound statement

for ( e1; e2; e3 ) { loop body };

the expressions e1, e2 and e3 may be just abount any expressions, though usually they are quite simple. The expression e1 is evaluated only once. e2 is evaluated every time the loop executes and controls when the loop exits and e3 is likewise evaluted every time the loop executes but has no special meaning (though it is usually used to increment a variable used by e2). In effect e3 is the last statement of the loop body and could indeed be placed there.

I do not know why the code has been written in the way it has. It is valid but very unusual to use e3 in this way - normally it is used as part of the "loop control" logic in order to distinguish loop control from loop body.

The way in which e2 has been written. ++i<99 is also unusual as it is both incrementing the loop counter, i, and testing it.

I would replace this obfuscated code with a "normal" for loop

for(float i=0.,g=0.,e,s; i<99.; i+=1.0)
{
...other stuff
O.xyz+=5e-5*abs(cos(vec3(3,2,1)+log(s*9.)))/dot(p,p)/e
}

though I would first check that this transformation exactly corresponds to the original. Without checking I am not sure if they execute the loop body 98, 99 or 100 times - but I suspect that in this particular piece of code that does not matter and that something in the "other stuff" actually controls when the loop is to exit either by a conditional goto, return or by setting i to 99 or 100 or some other large value.

Thanks @mkst. 😊

Merci @mkst. 😊

@TheEmu

I do not know why the code has been written in the way it has. It is valid but very unusual to use e3 in this way - normally it is used as part of the "loop control" logic in order to distinguish loop control from loop body.

The way in which e2 has been written. ++i<99 is also unusual as it is both incrementing the loop counter, i, and testing it.

I would replace this obfuscated code with a "normal" for loop

Thanks for your answer. I spent an age expanding every bit of code, learn't a few new things and then discovered that the real cause of the problem was not the obfuscation but something far simpler. In most of the authors code he had worked in a vec3 for the color and added in the alpha at the end but in this one he had initialised it with vec4(0.) and never gave the alpha a value. On shadertoy they look fine but as part of a scene they were showing black. I just needed to add an alpha = 1. to the end of the code. 😳

Thanks @Socialhazard - at my age keeping both ends up can be a challenge 😜

I forgot to comment on this earlier but I love it. 👍 😆 😎

https://www.istripper.com/forum/thread/29408/79?post=760382

Everything about iStripper / Share your FullScreen - Member Created Scenes here

FG926-FG939 Fourteen selected WebGL shaders remixed & converted to OpenGL to run &/or remix on iStripper's Fullscreen OpenGL platform. Standing or table work randomly applies to all these scenes unles...

Thanks @Socialhazard. Good to have such solid member 😉

Thanks @EverthangForever

Everything works fine for me. Excellent work. 😊

Merci @EverthangForever

Tout fonctionne bien pour moi. Excellent travail. 😊

Bon à savoir. Merci @ComteDracula 😊

Good to know. Thanks @ComteDracula