Saw above that Norton is flagging the installer and changing the name is supposed to help. I have Trend Micro and it just deletes the program completely!!! (Install program and the original program version). Has to completely turn off the Trend software and finish the download and once tested the istripper program, then turn the Trend back on and reopen istripper to retest again. FYI

I've just updated to 524 but the forums and profile pages are still blindingly white😭

Mine are more off white so maybe it's trying to apply my skin on those pages? 😕

Version 1.2.522 64bitNow, my personal skin is applied to the forum (with a black background, my eyes say thank you), but the UI language is still in english instead of french.My profile tab is in black too and the UI is in french : well done 👍

@stefnev1

How did you manage that?

I've just updated to 524 but the forums and profile pages are still blindingly white😭

I am really impressed by how nicely it is performing with 10 shows in 524. Sure it chews up ots of virtual memory but that is what a large 64 bit app will do. No hard faults at all. CPU usage is blow 1 percent on average.

Very responsive from a GUI perspective. This is really good progres.

Videos now work. Thank you.

Norton flagged the install on my laptop. There must be a configuration difference between them. I downloaded 524 from the web site, renamed the executable so it's just istripper-setup.exe and it installed fine on the laptop.

I think my strategy will be to do all installs this way for now on.

524 updated autmatically just fie on my desktop. I'll try my laptop next.

There are days you could definitely stay late at the office....

https://www.istripper.com/vr180/detail/0e0eb1ef0e04d47f

Version 1.2.522 64bit
Now, my personal skin is applied to the forum (with a black background, my eyes say thank you), but the UI language is still in english instead of french.

My profile tab is in black too and the UI is in french : well done 👍

I support the Idea of having Quick Access to Scaling settings
such as +5% and -5% buttons, near the Volume settings.

When I change size, I personally do operate very precise and "granular" control of it.
Such buttons should be +1 and -1 or they would be totally unuseful to me.

With a pair of +/- buttons I think that I would find 1%, or even 5%, increments and decrements rather too small if I wanted to make large changes but at the same time, as @HansSachs says, 5% may be too large for fine control. I would instead prefer that there be a single button which caused a size control slider to pop up, like the volume control button now works. This single slider would control either the "large" (single clip) or "small" (multi-clip) size depending on which mode the software was operating in when it was pressed.

It would also be good if the slider was accompanied by a box into which a numeric value could be entered directly so that we can specify directly and exactly a desired value such as 75% or 125% rather than fiddle about overshooting and undershooting until we get what we wanted in the first place.

@vg4us and @Celine

I had shared the same info about the name of the Installer changing..

https://www.istripper.com/forum/thread/53277/3?post=767628

I always Download the Installer, then I remove the cryptic characters if they exist.

And then the Installer has the same name each time.
Setup-iStripper.exe

During an Automatic Update however,
tis is not possible,
so the Security Software will possibly detect a Different name and prevent it...

I whitelist the Entire VGHD folder and all of it's subFolders.
this way the security software ignores all of this...

Cards that i had in my wishlist i put custom skins on them when i updated those skins disappeared. Do i have to redo all the custom skins when i'm ready to rent the cards?

I support the Idea of having Quick Access to Scaling settings
such as +5% and -5% buttons, near the Volume settings.

When I change size, I personally do operate very precise and "granular" control of it.
Such buttons should be +1 and -1 or they would be totally unuseful to me.

@celine
This is what I am talking about. This is from Norton File Insight MNtice how the executable filenames are slightly different. I think as long as there is a differnce in the name file insight will keep stopping what it thinks is a suspicious installation. Back in the old days I am reasonably sure that the setup program was always setup-istripper.exe:

Filename: setup-istripper_a40jco5bqpkutasx5jeyzzfsu0suf0.exe
Full Path: c:\users\rjsq\downloads\programs\setup-istripper_a40jco5bqpkutasx5jeyzzfsu0suf0.exe

____________________________

____________________________


Developers 
Not Available

Version 
Not Available

Identified 
Not Available

Last Used 
Not Available

Startup Item 
No

____________________________


Unknown
It is unknown how many users in the Norton Community have used this file.

Unknown
This file release is currently not known.

Unproven
There is not enough information about this file to recommend it.


____________________________



____________________________


File Thumbprint - SHA:
Not available
File Thumbprint - MD5:
Not available
===============================================================================
Filename: setup-istripper_a40jco5bqpabipdvl9u0zzfsu1suf1.exe
Full Path: c:\users\rjsq\downloads\programs\setup-istripper_a40jco5bqpabipdvl9u0zzfsu1suf1.exe

____________________________

____________________________


Developers 
Not Available

Version 
Not Available

Identified 
Not Available

Last Used 
Not Available

Startup Item 
No

____________________________


Unknown
It is unknown how many users in the Norton Community have used this file.

Unknown
This file release is currently not known.

Unproven
There is not enough information about this file to recommend it.


____________________________



____________________________


File Thumbprint - SHA:
Not available
File Thumbprint - MD5:
Not available

@celine problem with the executable name on Norton is weird, the name of our exe hasn't changed.

Let me see if I can nail it down better for you next time it occurs. I reasonably sure I will have an install issue with Norton upon the next upgrade as it has been this way for awhile now. I keep adding the installation EXE as an exception for file insight by clicking "trust" this program. I'll see if there is anything I can find in the Norton log but Norton is not the most friendly app for logging user interactions.

Just because you don't use the size over 100% in big size, doesn't mean other people don't.

That is irrelevant to my point which was that I, and I think most people, do not change that or any other setting very often. If they do then the better thing to do is to ask for an even more accessible control grouped with the icons at the bottom right corner of the window - as it happens I would love to see a size control there and I would use it.

To put it another way, I would like to see a one click access to the size control rather than a one click access to the settings page which has to be followed by moveing down down to and changing the setting followed by going back to where you started from which is what you were asking for.

Settings should not be things that are frequently changed, if they are then they should be moved to be, or be supplemented by, active controls. Reducing the access to the settings page to a single click would only paper over the wart in the GUI design rather than fix it.

I support the Idea of having Quick Access to Scaling settings
such as +5% and -5% buttons, near the Volume settings.

Such that If Viewing Small Size, the Button affects the Small Size Scaling
and if Viewing Large Size, then the buttons affect large Size Scaling.

So the Buttons are dynamic and Affect the Size that is currently being Viewed.
And more so,
if you are hovering the Mouse over one of these buttons, then the mouse wheel can be used to affect the scaling.

@TheEmu
Just because you don't use the size over 100% in big size, doesn't mean other people don't. The only way for that is in the settings. We are not speaking abt. the software being useless, just not user friendly. If it would be user friendly, they would listen what we want and since those are not that difficult to arrange, they would do that and make the software more enjoyable to use. It won't ***** anybody if there is not one way to do something but more ways, especially when they took away something which was there for a long time. But I won't argue with you abt. anything because it is completely useless, since you always come out on top knowing everything better and have the last word. It's been so for quite some time when someone has different opinion than yours. I wanted to point out that without giving back the functions I use and the way I use this version for me is one step forward, two steps back so to say.

Intermitent crashing.....running on a 1650 super ryzen53600x and 32gbram 64bit

I am impressed with the performance. With 10 shows it's stll below 1 percent average CPU. The system is responsive and the shows are playing right. I'll keep irt running awhile longer.

Resource wise I have to say that the 64 bit version 522 seems quite good. Average CPU is below 1 percent with 5 shows playing. I have not tried an experiment with 10 but will do so.

I had an odd problem with 522 this morning. The main menu became invisible. I restarted istripper and it works fine now. I updated my NVIDIA drivers just in case it's a video issue but I have not seen anything like that with other applications.

very nice.... will get soon

There has been talk about iStripper 2.0 do we have any indication when that is coming?

I haven't updated in awhile and the version i have is working fine, should i wait or is the 64 Bit the real deal?

Please remind me how to make iStripper NOT display the window upon loading (I'm running it in covert mode but it's not really covert when I launch the software to say ISTRIPPER GIRLS ARE PREPARING THEIR BRAS

Like the look of the new version.... but a couple of issues.
The app dies completely after an indeterminate time - not just the UI, but the taskbar icon as well! It never did this before. Can't see any errors in event viewer to indicate an actual 'problem'
Whenever it starts, it's lost all the previews! - again this didn't happen before,

There's no way to set a shortcut to hide the app?

In the Windows version there is a setting "Keyboard Deactivation Toggle" in the "Safe For Work" section of the app. Is that not there for the Mac version ?

This is insane. There's no way to set a shortcut to hide the app? This is a basic feature. Remember the Boss button?

On a similar note, if you set the settings where clicking on the model enables/disables iStripper, the model remains disabled—for about three seconds, and then another one pops on the screen. This is obviously not what is wanted.

it shouldn't take more than few minutes for the programmers to create such an useful function back again

As @Wyldanimal has explained that useful function is already there, and always was there, as a single click on the Collection tab.

Another one was to take away the button taking into the settings.

As "settings" should be long lasting infrequently changed configuration items the fact that it takes two clicks to get there should be no hardship. If there is something that you find you need to change more frequently then it is reasonable to have it moved to the main part of the display, e.g. as an additional icon with those in the bottom right corner of the screen - like the volume control has been moved there from the settings page. I, for one, would not want an additional button for something (like settings) that I use about once every couple of months.

I understand but still it shouldn't take more than few minutes for the programmers to create such an useful function back again, which shouldn't been taken away at first place. With such unneccessary steps backwards they distroy the improvements they done. Another one was to take away the button taking into the settings.

If you have Viewed Several Cards, the Back Arrow or Back Arrow Key, Might go Backwards through several Cards.

To Go Directly to the My Collection View, Click on My Collection along the top Menu.

To "Go Inside" a card and Back to My Collection

One Click on a card to View the Cards Details.
One Click on My Collection to get back.

only Two Clicks...


The Previous version also took Two Clicks

One Click on a card to View the Cards Details.
One Click on "X" to get back.

I love Sky Pierce in this video!
She's totally herself, natural, sweet and she expresses a real desire to share this intimate moment with you...

https://www.istripper.com/vr180/detail/008db9b9f749a563

Enjoy !

@JagX308
You may have a look at this thread http://www.istripper.com/forum/thread/42188/1?post=621606

And for further issue, please use the section Bugs&Fixes of the forum.

To learn about the software, click on the "i" with a circle at the top right of the window. You have a user manual there.

Also, several of my paid for items are grey in my Collection. Some are not completely downloaded and seem to have stopped downloading. One of them has not started downloading, and when I hover the mouse over it only a cross appears. What do I need to do to get this one to download?

Is there a way of deleting a particular preview if I don't want it? Maybe this is related to the same question: When I click on one of the preview images, a cross and other symbols appear on it. I can't seem to figure out the function of these, can anyone explain them please?

Wau, was für eine Schönheit, freu mich schon auf deine Karten💖💖💖😍

Some thoughts:when I go inside a bought card - missing the red X from the top right corner to exit the card back to the collections

I keep going to click this only to find its gone

If you use the "back" navigation button, i.e. the < icon at the top left of the window, while you are in a card's details page it will take you back your My Collection page if that is where you came from. As will pressing the backspace key.

that would be a nice suprise ...

Some thoughts:when I go inside a bought card - missing the red X from the top right corner to exit the card back to the collections

I keep going to click this only to find its gone

Hello bunnies!!!

The much-awaited Lisa Belys and her First Release have finally arrived! 😍
Her show "Achey Brakey Heart" is the perfect way to start your day!

Lisa is ready for the rodeo with her cowboy hat and denim shorts! Are you?😈



Enjoy 💋

Thank you for the nice words, DjKosi80 !

@ComteDracula le fichier zip a été corrigé. Merci pour vos précieux commentaires 👍

@ComteDracula the zip file has been corrected now. Thank you for your valuable feedback 😊

https://scenes.virtuastripper.net/ET_FractalGardenA135-A148.zip

zip size = 514 Kb

Thanks @EverthangForever, 😊

Scene A141 has a beige background.


Merci @EverthangForever, 😊

La scène A141 a un fond beige.

@DjKosi80 your first post... Welcome to the forum..
I like your avatar

The best stripper software ever released and updated by VirtuelGirl -->!!! iStripper!!!<-, I've had it since 2010 and I've never kept it a secret from my girlfriend. Why should I hide it too! And I even showed it to her openly. In order to actually only get an incentive for your own love life, with your own partner.
😘😇👍😋😛😜

The problem to play the videos inside iStripper app will be corrected with next version, to be released in ~2 weeks.
Of course you can still download them !
Thx for your patience

@Celine

the name of our exe hasn't changed.

often times the Download of the Installer is given a cryptic bunch of extra characters.

setup-istripper.exe
During the Download, becomes :
setup-istripper_q0oJjTUwg4LKWkZNxVChi0ZZFSU0SUF0.exe
setup-istripper_q0oJjTUwg4UzwS1tmtPtJeZZFSU0SUF0.exe
setup-istripper_q0oJjTUwg4X5HjaOalTfziZZFSU1SUF1.exe

Demo Video: I did this three times to get the file names above...
https://wyldanimal.com/videos/Installer-Name-Changes-001.mp4

Videos still don't work in 522.

I confirm they don't. 😕 Windows 10, 64-bits

It corrects :

The fact that the software did not launch minimized after the upgrade from 1.2.378
The crash when switching between "Season" and "All" tabs on the Trading Cards section

Video play back is not one of the listed Corrections.
will be corrected in the Next version.

videos not working -> reported to the developers

problem with the executable name on Norton is weird, the name of our exe hasn't changed.

I'm going to test Norton & Kaspersky

Videos still don't work in 522.

I confirm they don't. 😕 Windows 10, 64-bits