I created a new set of Backgrounds and Lighting files for the Strip Bar Screen saver.

www.deskbabes.net - software links on the left

or the Direct link to the instructions here

http://www.deskbabes.net/files/backgrounds.htm

Make a backup of the files in your vghd\Data\backgrounds folder first.

Then replace the files in that folder with the ones in the downloaded zip.

Make Sure to Back up these 4 files first...

Then replace them with the files from the ZIP you downloaded

Here are the Settings I used for the Strip Bar Screen Saver.
Don't forget to click on Confirm after changing the settings.
I also only check off one screen saver at a time..

ty @Wyldanimal have a good day.

Club1_0.scd for stand, pole dance and walk in / out clips
Club1_2.scd for in front of task bar clips

Sample File:

BACKGROUND=fond_hustler_01.jpg#
REFLECTION REFLECTION = ON R-EFLECTION = OFF
S-HADOW SHADOW = ON S-HADOW = OFF
COLORLIGHT(9.99,0.00,0.00) Colored Light Amount of Red, Green, Blue
POSLIGHT(-1,0,.5) Light Position

COLORLIGHT(0.00,9.99,0.00) 2nd light
POSLIGHT(0.0,1,.5)

COLORLIGHT(0.00,0.00,9.99) 3rd light ?
POSLIGHT(1.0,2,.5)

MOVELIGHTSAMPLITUDE(10) How much the Lights move around 0=none
GIRLTRANSLATION(0,2.8,-4) Clip Position Left/Right, Up/Down, Zoom
AMBIENTLIGHT(0.80,0.80,0.80) Minum Brightness and color R,G,B
0,0,0 = black or No Light.
S-HOWLIGHTS SHOWLIGHTS = ON for Debug Lights

F-OREGROUND=foreground_hustler.bmp# remove the - to use
a forground image

GIRLTRANSLATION(0,2.8,-4)
Clip Position Left/Right, Up/Down, Zoom
0 = center on screen
2.8 = how far to move up from bottom of screen

• 4 = zoom factor (-4 to 4) ??

here zoom is set to max or -4 negative 4

GIRLTRANSLATION(0,2.8,4)
Clip Position Left/Right, Up/Down, Zoom
0 = center on screen
2.8 = how far to move up from bottom of screen
4 = zoom factor (-4 to 4) ??

here zoom is set to min or 4 positive 4

I'm guessing at all of these settings.
If any one has better or more accurate info, Please share it.

I did set up Three Lights, and my Lighting cycles through three Colors.

So I think you can have more then two Lights.

COLORLIGHT(0.00,9.99,0.00)
color of Light in Red, Green, Blue mix amounts
O.00 Red
9.99 Green
0.00 Blue
Light = GREEN
POSLIGHT(0.0,1,.5)
Left/Right, Up/Down , Duration in Seconds
0.0 = Center
1 = Up from bottom
.5 = on for half a second.

The Lights cycle from one to the other to the Ambient Light.

AMBIENTLIGHT(0.80,0.80,0.80)
Mix of Red, Green, Blue - Equal Mix = white light.
Minumum amount of Light (never less than this, Too Bright and you won't see the other lights have an Effect. Too Dim and clip will be dark)
(0,0,0) = No Light - BLACK

here the green light is cycled on

the blue light

the red light

so I think All three Lights are working...

thanks @wyldanimal
I found my optimal settings for girl position and zoom.
Goal is to max out the girls size without loosing parts of them
In the club1_0 my setting are
GIRLTRANSLATION(0,2.5,0)
In the club1_2 i use this
GIRLTRANSLATION(0,3.00,0)
It can be that parts of a girl are missing here when she lies down
When she sits or kneels this setting works great. Tested it with an duo card as well.