When Recording the RAW video, FPS has a dramatic affect on File size.
RAW video recording with Doubling of the Frame Rate = Double or More the File Size.

Then there is the Encoding process.
The More Important Function of Encoding is the BitRate.
Bitrate of the Encoding is what effectively determines that file size.

You can Have two Video's of the Same Dimension.
1080p for example
One Encoded for 30 FPS at 128Mb/s
and
One Encoded for 60FPS at 128MB/s

Both Videos will be about the same size.
But the 30 FPS would probably look better, because Each Frame Displayed, will have High density of Bits.
About Double the Bit Density of the 60 FPS video.

The 60 FPS video might increase in Size as there will be more Key Frames Needed.

To Keep the same Quality of Video, and Also Increase to a higher Frame Rate,
then you Also need to Increase the Bitrate as well.

Doubling the Frame rate and Doubling of the Bit rate would result in More than a Doubling of the File size.

But it is the Encoding Process that takes the Biggest Hit..
Increasing the Frame Rate means Processing twice as many frames, and then also Increasing the Bitrate Will add another doubling to the Processing time.

So About 4 times the Amount of Processing Time required.

The Team is already taking close to 24 hours to Process / Encode the Video Clips...
If the Frame rate and Bit Rates both Increase, then it might take More than 2 Days to Encode a single card.

Remember, that the Encoded Video, every Frame depends on the Information of the Previous Frame.
You Need all of the Bits from the Previous frame to decode the Next frame correctly.
and so on, and so on....

It is a nice solution- very clever! and shows the cards the cards that meet the specification very well. My concern was more that there really aren't a lot of cards in the last 9 years that met that requirement as an entire card. You found, what, about 60 of them? It's not a lot, but any group that includes Isabelle, Jessika, Sophie Lilith, and Irina Gubeva is going to give a good start.

I am simply suggesting that there might be additional content that the original poster might enjoy if we start with regular cards (XXX are a lost cause) and are selective with what clips are shown. Although, I admit, after reviewing a few cards there might not be as much as I thought. The girls really do tend to do "full nudity" clips these days, don't they?

It was a well Asked Question
"I'm looking to find the girls & cards that are labeled as Nudity instead of Full Nudity"

and I'm glad I was able to provide a solution for it.
https://www.istripper.com/forum/thread/54347/1?post=776274

With cards that have Erotic Levels above Nudity,
Often the Lower Erotic level clips are Short Edited clips from a performance that ends up at a higher Erotic level.

This can make the Nudity only clips, seem cut short or rushed. With not Enough of the "StripTease" to them.

But for the cards where Nudity is the Highest Erotic Level
The Model has more and longer of that "StripTease" type of clip...
They are not trying to go to that higher level of eroticism, so the Focus is more on the Lower level of eroticism.

One very easy way to do so is by setting the Levels of Eroticism in Settings to the desired levels and then just playing the card(s).

This is true After the card is in your Collection.
If you purchased a card with higher than Nudity, you can use the Settings Level control to NOT play clips of levels above your desired Level.

But in the Store, there is NO filter that can be checked off, to ONLY see cards with Nudity as the Highest Level.

Using my Text Filter posted above Provides this ability.
Copy the Filter String,
Paste it in the Stores filter box
and then you will only see the cards that Contain Nudity as the Highest Level of eroticism.

I think you would have more enjoyable results if you did this at more granular level. There are LOTS of "nudity", "topless", and "no nudity" clips on cards that include more explicit content. One very easy way to do so is by setting the Levels of Eroticism in Settings to the desired levels and then just playing the card(s). This gives you FAR more cards as your input.

I have found this works very well with card level playlists to give me just what I want.

I like the site but I don't want the stripper samples to appear all of the time just when I am on the site how do I do that?

@rickeyl

If you want to disable the preview push, go to settings, scroll to the clips section, set the free preview push to "Never.

@iminterested

If you have problems seeing your cards in your collection, try clicking on your name in the GUI (app) select synchronize with servers to update your collection.

Alas, there is a downside to everything. Increasing the frame rate to 60 from 30 would double the card size. I think that would cause more problems than we would get for a benefit. And since I am already in the process of adding a dedicated 4TB drive just for iStipper, you can see that things can add up quickly even at the current card sizes- which can be over 3G per card at 4K!

I wanted to go over the basics to make sure it's not something simple causing the issue. You can select the gear icon in the top right to access the settings. Under Desktop you can select how long you want the show duration to be.

If this still doesn't fix your issue I would contact the support team. I am just a fellow user trying to help others :) Happy New year!

Im good now thanks

Hey there SolitudeAtLast and a happy new year.

Once I hover over the show it gives me no option to download and when I right click there is no download option either. The more option just leads to a preview of the show.

My account is old but I am still new to this so any help would be greatly appreciated.

When you go to my collection highlight one of the new shows you purchased. There should be a download option. This will download all of the new scenes instead of just the previews. Once you download the scenes you can right click the play button and select "Play all clips".

Hello to this community. I paid for 2 shows and both of them never appeared. It says that I bought the shows in my collection but when I play them I don't get the full show. Can someone please tell me what's going on here? Thanks.

Alissa Foxy without any doubt.
Charm, positive attitude, sensuality and the best smile.

Happy 2024 to Everyone! 😄

Happy New Year to our lovely community 😇💕

I want to wish a very Happy New Year to All of the iStripper Members 😎👍

A very happy new year 2024 and may your health be good 😎

Yes to both. As this is only for fun, who cares if people vote in both and that there were 2 different "voting regimes" so to speak.You can ***** as much as you want, last MotY votes 2021 and 2022 were discord only and so is this one. There will be no vote of this kind in this forum anymore.Alissa Foxy was Talent of the year 2022.We understood.Someone else please!Alissa Foxy is in lead again, only way to change this is to join Discord and vote for someone else 😂https://discord.com/channels/709339443777110026/809783937907687505/1190268505354936361

I think you think I'm invested in this one way or the other - ***** is too strong of a word. I don't care either way what's going to happen with the vote, jsut saying it wouldn't take much to "appease" the forum-only people (of which I am not one, btw).

Alissa Foxy - goddess Istripper

It has been 2024 for half an hour here... Happy New Year to everyone!

Here is an Add-On to the NewYears2024 scene
I recorded a video of the Tokyo New Years Eve Fireworks display
Converted the Video clip in to JPG frames ( 826 of them )
Then Made an Image ***** Animation of the Individual Frames and used that as the Scene Background.
UnZip it to the same New Year Scene Folder.
Scene Add on Only
https://virtuastripper.net/WA_New_Years_2024_SIF.zip
Sample Image
https://virtuastripper.net/SceneImages/WA_New_Years_2024_SIF.jpg

Note: it has to pre-load 826 images, and then animate them using 826 timers.
so there is a delay of 30 seconds to a minute before the scene starts...

Source of Tokyo Video used to make the Scene Image ***** background.
https://youtu.be/0y0li-uoXek?si=G5Iwd07bE-XgBmBs

Awesome.🔥👍👍👍👍

Bonne et heureuse nouvelle *****ée pour tous ceux et toutes celles qui liront ce message. Mes voeux pour 2024 ... le retour de Belka et de Mila Azul !!! 😍 ❤️ 👍

Happy New Year to everyone who reads this message. My wishes for 2024... the return of Belka and Mila Azul!!!😍 ❤️ 👍

I prefer an NAS - I have an QNAP TVS-671 with 6 HHD each 8TB WD RED Pro - simply move the Data- and the Model folder to the NAS and make an new installation and in the setup specify the installation path to your NAS and then rebuild your collection.

Happy new year to everyone here. May all your wishes and dream comes true in 2024 😄

Happy New Year to the entire team at iStripper. 2024 should be awesome.😍👍👍👍👍

Alissa Foxy is in lead again, only way to change this is to join Discord and vote for someone else 😂

You do not understand. It is wrongly chosen from the start.

What you mean "wrongly" chosen? The candidates are always selected from those who have been "Talent of the Month" in that year. Because Alissa Foxy was Talent of the Month this year, it would be "wrong" not to include her as a candidate.

There's no rule against someone winning TotY twice if that's how members here vote. If members think that Alissa Foxy was the best performer this year, that's how it is then - and this is not that serious to begin with. I'm sure other TotY-candidates won't be horribly offended even if Alissa won again 😀

My votes went for Kelly Collins and Shelena, but I do like the others, too. No point in voting everyone, though...

I want to swap my iStripper files over to an external hard drive in order to save file space on my PC. What should I be looking for in external drive specs ( I'll want to call up my iStripper files,buy models, see shows,etc.) as close as possible to the way I do now on my PC.

Any thoughts on what drives I should be considering? Should I just be looking at ssd's?

Are there instructions on how to best swap over my existing files?

Alissa Foxy is in lead again, only way to change this is to join Discord and vote for someone else 😂

You do not understand. It is wrongly chosen from the start.

Yes to both. As this is only for fun, who cares if people vote in both and that there were 2 different "voting regimes" so to speak.

You can ***** as much as you want, last MotY votes 2021 and 2022 were discord only and so is this one. There will be no vote of this kind in this forum anymore.

Alissa Foxy was Talent of the year 2022.
We understood.
Someone else please!

Alissa Foxy is in lead again, only way to change this is to join Discord and vote for someone else 😂
https://discord.com/channels/709339443777110026/809783937907687505/1190268505354936361

Alissa Foxy was Talent of the year 2022.
We understood.
Someone else please!

For me are Kelly Collins, Mara Blake, Elle Mira, Shelena and Kama Oxi .
It's too hard to pick just one.

Would making a poll here and on Discord then adding the results together really be THAT mich work?That wouldn't work, as you van only make a single vote here in the forum and several votes on discord, so you get two different results that can't be merged or compared. Also could people vote in both then, manipulating the results even more.

Yes to both. As this is only for fun, who cares if people vote in both and that there were 2 different "voting regimes" so to speak.

GOT IT SOLVED..
I have an old account from Discord for Gaming..
I did not set my Birthdate..
Once I set my birthdate, I can now get into NSFW iStripper content !!

YES !!

For the Complete List of Shared Scene's being Hosted on my VirtuaStripper site
Visit this Page:
https://VirtuaStripper.net

Mina Von D - Nothing To Hide - f1472 - iStripper XXX
Claire Roos - Wooly Love - f1453 - iStripper XXX
Rocky Di - Smiling Strip - e1945 - iStripper
Blu Chanelle - Blu Being Playful - f1443 - iStripper XXX
Lilly Mays - Lingerie Printanière - e1941 - iStripper
Angelika Grays - Turquoise Lace - f1468 - iStripper XXX
Eva Generosi - Sweet And Flimsy - f1430 - iStripper XXX

In Keeping with Tradition
Here is my Happy New Year scene for New Years 2024

Scene:
https://virtuastripper.net/WA-NewYears2024.zip
Image:
https://virtuastripper.net/SceneImages/WA-NewYears2024.jpg
Sound File: ( put it in your Data/Musics Folder)
https://virtuastripper.net/HNY-musics.zip
https://virtuastripper.net/SceneImages/HNY-musics.jpg

Kelly Collins - super star!

@Calgon
Yes I've included https://www.shadertoy.com/view/DsfGWH as one of my fav
texture grabbers in (C)RandomShader07.scn when using @WA 's Random Shader
app. its also Included as FGA320 in next week's OpenGL conversion bunch. It sort of works.
Beyond that, It is the seamless tiling by alternately inverting 2Dtextures within a flat shader
that I'm trying to mull thru. @WA 's TileATexture02x?.fsh seemed like a good starting point.

I've adapted this to make walls and ceilings for a scene I'm working on so that one texture can be used across the whole surface.
I put the shader in a framebuffer and then called that from a sprite.

@EverthangForever couldn't you achieve what you are after by setting 4 panels in a square arrangement in a framebuffer and then calling that arrangement from the sprite ?

This works sweet, however..to create more seamless patterns overall,
how would one re-write this so that every second x panel instance was reversed left to right
and every second y instance of the texture was inverted up/down. ?

The only thing I can think of is to use a texture which incl. transparent panel beside and below
da graphic, then run same two shaders with the top one having negative tilex and tiley..ouch😕!

Mara Blake should win imho.

As for voting for more than one model I think that that should not be allowed. You vote once for one model. If you look at this from another point of view why can't I vote 100 times for one model?

Also on discord you can't vote more then once for one girl, but you can give other girls a vote two.

Sorry @Ullubo but in the main channels on Discord there are fewre posts than there have been on these forums recently and I monitor both.

Sorry but I think the whole Discored thing is totally unrepresentative of the typical iS membership especially on these forums.

Then you must be on a total different discord server than I am. Alone in the German and French channels, we had more posts yesterday, in a few hours, then this forum in a week.
Also we have more bug reports and feedback on discord, especially the team moved it there for a reason.
You can stay in this outdated medium, called forum, and continue to mourn the old days. I will move on.

ps.: Even discord is not the future and will be replaced at some point, there are other platform already. That's the way things go.

Would making a poll here and on Discord then adding the results together really be THAT mich work?

That wouldn't work, as you van only make a single vote here in the forum and several votes on discord, so you get two different results that can't be merged or compared. Also could people vote in both then, manipulating the results even more.

Happy to see Kama coming back! 😍

Would making a poll here and on Discord then adding the results together really be THAT mich work?

Issue resolved......thread closed

No, there is no technical error, you are using an old version of iStripper. Thats why you are seeing the trading cards "on sale" If you try to buy them, you will get a server error. Please update iStripper.

Ah OK, thought so. Thanks for the clarification. I opened another thread in the bug reporting forum previously as I was pretty ***** when I saw those cards in the store..

As for updating iStripper, I already tried that but ran into some weird issues, that's why I had to stay with my old (but most stable) version.