The feedback tab is not working for me.

REALLY missing the carousel preview of girls. One of my favorite things to hop on and see the new shows and others that might interest me in a unique format.

JUST because of this, going to revert back for now.

While I don't mind the new layout of the app, I'm not a fan that it's just cards on the front page, the carousel of the Ladies was better and way more attractive. The cards makes it look the starting page of the Office 365, i.e. like a business app instead of a fun app (the weird font and display box of the credits reinforces that since it looks like a stock ticker or something).

On my PC, there is no way to make the app start minimized in the systray like previous versions. If that's a bug, that's fine, but if it's a choice, that's really bad and not desired.

I also really don't like that the first set of cards on the Featured page is "Popular Shows" and can't be changed to "Newest Shows".

What I dislike most is that istripper is no longer using (or allowing for) Windows 8.1 in this (and newer) version.
I am happy that 12376 still works for me.

I just saw this:

to simplify the choice of size, the slider to set your cards size has been replaced by 2 buttons : small/large
There is no need, at all, to "simplify" anything: the slider which permits us (in the ordinary version) to adjust cards' size is, to me, a very good, important and appreciated function, which I strongly hope will be re-added in future to new versions of app.

I too support it

Not a fan. Where has the carousel gone? That was my favourite feature.

Not a fan. Where has the carousel gone? That was my favourite feature.

On the moon 😐

It was my favourite feature as well 😕

Now iStripper will become a warehouse with a metallic door with a lot of filters and buttons at the entrance. 😎

***** thing, and not specific to this beta, but I find the labelling used in Store to be not completely logical.

Currently there are 5 sections in the Store: "All", "Coming soon", "Sale", "Special Event Cards" and "Wishlist"... "All" is not really all here, is it. Seeing the sections listed like that one could easily expect the "All"-section to include "Coming soon" and "Special event cards", too, but of course it doesn't.

I would make following changes:

1) Create just 3 main sections of the Store: 1 = "Buy now" (same as current "All"), 2 = "Coming soon" and 3 = "Special Event Cards". These are mutually exclusive categories if you continue the practice that information of future SEC is not given ahead of release.

2) Then you can create new "All" section, which contains ALL above three sections

3) After this you should keep current "Wish list" and "Sale" sections, but these should be somehow visually distinguishable from the above three, and not listed like now, because these are just subsets of of new suggested "All" category from point 2) above.

@JonC001

What I dislike most is that istripper is no longer using (or allowing for) Windows 8.1 in this (and newer) version.
I am happy that 12376 still works for me.

Same here. I'm using Windows 7 and I can't upgrade my system for many reasons and I don't want to.

Full size switches to small size without me clicking the model or anything else. Happened a few times now. 😕 Not to be ***** with that large clickable area issue with GPU mode. OMG, just happened again. No click, I just moved the cursor around. Only happens rarely though.

I am not seeing anything like that, at least in Windows 10. The girl controls seem to be working just fine and not doing anything strange. I do wish Totem wasn't so eager to close the Playlist and Now Playing tabs though when you switch screens. It's nice and all to get them out of the way, I suppose, but once I have opened them on the collection screen I would like them to be open on that screen when I moved back to it.

Also, the Featured screen has taken to spawning shifted about 5mm to the left when maximized. The other screens are centered properly, but not this one.

@Socialhazard

I have had similar symptoms in the past, but it was not just with iStripper. It seems that my laptop's touchpad was occasionally generating spurious mouse click events even if I was not touching it. It seemed to occur when the edge of my hand just brushed the edge of the laptop close to the touchpad - I suspect that the cause may have been indiscernible static discharges. It has not reappeared since I have relocated and, coincidently or not, my laptop is now situated in a place where I am less likely to accumulate a small static charge (my dining room as opposed to my bedroom).

@Socialhazard

This happens to me with this new beta every time when...

1) Show is running full size, Desktop mode
2) Minimize the iStripper software window
3) Move your mouse on model --> switches to small size without clicking anything

(not sure if this that "large clickable area issue with GPU mode". I have missed that discussion, but I am watching my shows with GPU selected)

It looks like we want to be able to choose from all versions, or from the latest versions of this app.
From what I've read, this new version changes too much of what I like.
I ***** being pushed into versions I don't like.
Why to change something that is good and works ????????

@Dfner

That does not happen for me. It looks like that in your case the software is seeing spurious mouse events, but if so then I have no idea as to where they may be coming from.

It is possible that your and @Socialhazard can ameliorate the problem by adjusting your mouse or touchpad settings, in particular the sensitivity to "taps".

@TheEmu

I don't think the issue is in the sensitivity to taps in this case. It seems to be about moving the cursor on screen.

I made a test:

1) Start the show in full size
2) Minimize the software window

3a) Place the cursor in a place where the model (in standing clip) soon will walk and take your hand off your mouse. When the model walks over the cursor, nothing changes: the show continues in full size
3b) Wait for a full minute and don't tap mouse on anything, just keep the cursor in one place. Then simply move the mouse slightly over the model, again not tapping on anything, and the show switches to small size.

If I close the software window (instead of minimizing in point 2) above), this error does not occur. Only minimizing the window and then moving cursor over model makes it switch to small size.

EDIT: this happens only in GPU mode. If I change the mode to CPU in Settings, above described issue does not occur.

Well even with the Beta Version my Problems still exist, the Tabs "Featured, Events, VR and Forum are empty and do not load.Also do the Credit and Profile Tabs not work.And dont tell me my ISP is blocking this Stuff, all this works fine over the Browser, without a VPN.

Hi, this looks like a firewall/antivirus issue where the program iStripper is being blocked from accessing web pages. The new beta 1.2.512 now has a signed executable file, please let us know if you still encounter the problem with it. If you do, can you try deactivating your antivirus before launching iStripper and tell me if it works without it (just for the sake of testing for now)?

I deleted all my cards and have been downloading them and deleteing the clips I dont want lately. I downloaded the beta and continued to do what I have been doing. I downloaded all sonya blazes cards and disabled the clips I did not want on the first card and Istripper crashes (not surprized at all it crashed...) anyways now all her cards show as not downloaded when I know they are. So here is a bug report for you. youre welcome 😆.

Good morning! May I ask, when iStripper crashed, were you in the process of downloading any card or were you done downloading and the only thing happening was you unticking the clip boxes?

Hi everyone, the 2 problems of "I bought a card and it was bought twice" and "iStripper window is shown even though I launched it in silent mode/at Windows startup" should be fixed in the 1.2.512 version. Please let us know if you still experience them with that (upcoming) version!

I don't think the issue is in the sensitivity to taps in this case. It seems to be about moving the cursor on screen.

Then simply move the mouse slightly over the model, again not tapping on anything, and the show switches to small size.

I have known cases where just touching the touchpad as I started to move the mouse was seen as begining with a very short tap - rather like keybounce - no matter how careful I was. I fixed that by reducing the touchpad's sensitivity to taps. before

I have tried to reproduce your symptoms by following the procedure you outlined - but I don't see a switch to small mode unless I deliberately "tap" when starting to move the mouse pointer.

but I don't see a switch to small mode unless I deliberately "tap" when starting to move the mouse pointer.

Change the setting in advance setting of the mouse click.
and see if it still Happens.

I have mine set to Pause / Resume
and I too have experienced that when a model enters the screen, (Right after I clicked to start iStripper) it goes to pause
even though I didn't touch the mouse.
Almost like the mouse click was buffered, and then interpreted as the click on the Model
I'm using CPU mode.

I have mine set to Pause / Resume

As do I and I have not seen these (WyldAnimal's or Dfner's) problems with this, or any earlier, version of the software since I reduced the touchpad's tap sensitivity.

@Wyldanimal I will test this later on, but the issue doesn't really bother me. I thought at first that it is designed that way - that when you minimize your software, the show defaults to small mode - although I couldn't think of why that would happen only if I move my mouse :)

@TheEmu I should have mentioned that I use regular PC and wireless mouse (no touchpad). And in this phase...

3b) Wait for a full minute and don't tap mouse on anything, just keep the cursor in one place. Then simply move the mouse slightly over the model, again not tapping on anything, and the show switches to small size.

... I deliberately moved the mouse very slightly holding it just between my thumb and index finger - palm was not on the mouse and I didn't have any fingers even close to the buttons.

As I said, not a big deal but maybe interesting information to developers. Maybe this depends on what graphic processor one uses? To me that happens only if I have GPU selected instead of CPU (my PC has "NVIDIA GeForce GTX 1070"). In my graphic settings in Windows I have given vghd.exe "Best performace"-setting (only software in that category, the rest are "Let Windows decide"). EDIT: if I remove that "Best performance"-setting from vghd.exe and let that be decided by Windows as the rest of the programs, it doesn't have effect on this issue.

... I deliberately moved the mouse very slightly holding it just between my thumb and index finger - palm was not on the mouse and I didn't have any fingers even close to the buttons.

That can be enough to generate a "tap" (mouse down, mouse up) if the system is too sensitive. I have seen it happen just by picking up a mouse. What you describe is pretty much what was happening to me before I changed the sensitivity (it was not happening every time, but was a frequent happening). I have seen it happen with touchpads, wired mice and trackballs.

Almost like the mouse click was buffered, and then interpreted as the click on the Model

Or what you think is one tap is actually two shorter ones (like keybounce can do for keyboards if the keybounce suppression period is too short).

I am not saying that these symptoms are due to the system outside of iStripper being overly sensitive, but nothing that either of you have said so far rules it out.

Some additional information: I changed my mouse settings (and back), but it didn't have any effect.

Also, when I minimize the software window after starting the show in full size, desktop mode, I can click my mouse as many times I like outside the performance of the model (so that there are no mouse-clicks "waiting") and even after that, when I just move the mouse on model, no matter how long I wait, it switches to small size. All that it needs is that before that I minimized the software.

I am convinced that there are at least no accidental taps or clicks triggering that. I have taken good care of checking that. Also, as this happens only whena I use GPU and systematically, every time after that same sequence (start show --> minimize --> move mouse on performer), and regardless how long I wait before I make that mouse move, I believe it has something to do with interaction between the software and my graphic processor.

But again, I don't mind this behaviour that much... If it's a bug and remains in the final software, no ***** done :)

The flag "New" is missing on the new cards downloaded, before opening them by clicking on the card in My Collection tab. I would like to see it again.

Hi, this could be happening if you're buying the card from the card page itself, as that would currently be considered a "Read" as soon as the "New" flag comes, which would remove it straight away. Did you encounter the behaviour without buying the card from the card page itself?

I am convinced that there are at least no accidental taps

As was I when I first encountered it - but I was wrong. Depending on the hardware it can be ridiculously easy to trigger accidental mouse events. The difference you see between when using the GPU and CPU could be due to the difference in CPU load affecting the effective sensitivity (a busy CPU would be less sensitive to closely spaced events).

Again, I am not saying that this is the explanation, but ruling it out is harder than you would first think.

Not a fan. Where has the carousel gone? That was my favourite feature.

On the moon 😐

It was my favourite feature as well 😕

Now iStripper will become a warehouse with a metallic door with a lot of filters and buttons at the entrance. 😎

Wait a second...
I do not try this beta, as I stay on 360 : this version does all what I need and want - without also the NFT garbage - , and just wait for a true 64b version, without memory leaks...
.... but ... but ... but do you mean that the carousel features where you see the models standing full size have vanished in this beta thing ?
If it is the case, it is an absolute NO-NO !
The various carousels are the only simple and friendly way to see and discover the ladies without looking like the ancient tv presentator, you never see more than the top/face...

I strongly and totally wish for carousels to be present, in a way or another...

Booleen answers:

.... but ... but ... but do you mean that the carousel features where you see the models standing full size have vanished in this beta thing ?

True

The various carousels are the only simple and friendly way to see and discover the ladies without looking like the ancient tv presentator, you never see more than the top/face...

True True

I strongly and totally wish for carousels to be present, in a way or another...

True True True