How do I post the iStripper pictures and cards? I remember you use brackets and codes but how do I know what code a card has?

The code is this:

[linkset][/linkset]

Every card has a letter designation a through f. Check to see what collection you are using to determine the letter. The most recent cards are either e or f cards.
Each card must have four numerals, regardless of card number.
In the 'e' cards, e0006 and e1850 are two examples as below shown:

These two examples will look like this:

[linkset]e0006[/linkset] [linkset]e1850[/linkset]

Note: these photos are only links to the cards. A click takes one to the details for the card.

Screenshots and other photos cannot be uploaded.
Links are usually acceptable.

Two f cards as examples are f0003 and f1273.

[linkset]f0003[/linkset] [linkset]f1273[/linkset]

test

it works ty ^^

welcome

u see the letter in the cliplist when u click the card

u see the letter in the cliplist when u click the card

I had never thought of doing that - though I did know that the full names of the files were there so I should have thought of it.

I never undersood why Totem no longer shows the letter with the card number on the card images in the store or on our "my collection" pages. They used to do it when the app was called VirtuaGirlHD. Incuding it would go a long way to eliminating the ambiguity and the consequent ***** regarding card numbers that we now have.

Incuding it would go a long way to eliminating the ambiguity and the consequent ***** regarding card numbers that we now have.

👍 😎

I never undersood why Totem no longer shows the letter

That stopped, when the Collections were renamed.

iStripper
iStripper XXX
iStripper Classic
iStripper XXX Classic


Because there is an Overlap of Letters within each of the New Designations.
Some 'a' series cards which were iStripper Classics, had their resolutions Updated, and they became part of the iStripper collection which is predominatly the 'e' series.

the 1st one being a0655


All of these can be Found in the data folder the file Names.xml

All cards are Available in 1080p
iStipper ( a and e series )
iStrpper XXX ( c and f series )

720p is the Highest Resolution
iStripper Classic (a series used to be called VirtuaGirlHD or just VirtuaGirl)
iStripper XXX Classic ( c series - used to be called DeskBabes, there are 4 f series cards )

480p Resolution
Virtuagirl Classics ( d series - Pre-VirtuaGirlHD cards, VG2 and Stripsaver2 - remastered from 240p Digital Tapes to 480p)

720p is the Highest Resolution
VirtuaGuy ( b series can be found on gay.istripper.com )

3K is the Highest Resolution
iDancer ( i series - can not normally be bought from store )

4K is highest Resolution
NFT Trading Cards ( g series )

Note: these photos are only links to the cards. A click takes one to the details for the card.

Screenshots and other photos cannot be uploaded.
Links are usually acceptable.

Ah okay thanks a lot. However, I've seen people post pictures before, particularly in that thread about your favorite 3 models. Is that not possible anymore?

However, I've seen people post pictures before, particularly in that thread about your favorite 3 models. Is that not possible anymore?

No it is no longer possible.😰

https://www.istripper.com/forum/thread/48572/1?post=726093

Alles über iStripper / FORUM : no more pictures – official update

Starting October 1st 2021, it will be impossible for you to post pictures (nor gifs) on the iStripper forum and to send pictures to other members thru Personal Messages. Of course, the forum remains o...

You can post pictures on the Discord server if you wish.

@Wyldanimal

That stopped, when the Collections were renamed.

I am well aware of that.

Because there is an Overlap of Letters within each of the New Designations.

and of that.


I know what happened, and to some extent can see what was behind it, but, as I said, in my previous post I can not understand why it was done.

For me, the explanations you give are far from being suffient reasons for choosing to replace an unambiguous set of card ids with one that is ambiguous (which has on several occasions led to people mis-identifying a card here) and which makes using those ids more difficult than it need be.

I know how to resolve the ambiguity, as do you and many others. But there are also many, particularly new users, who do not - for those users, especialy the new ones, it can only reflect negatively on the product.